Sanyo Vpc S60ex Instruction Manual

							105English
DIRECT PRINTING
To select one image and print it (displayed image)
Procedure to select one still image and print it.
1 Complete the printing setup (page 103).
2 Press the [l] or [m] button.
hSpecify the image to print.
PRINTPRINTPRINT
Print this image?Print this image?
COPIES 1
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							English106
3 Specify the number of prints.
1Select “COPIES”, and press the 
SET button.
2Press the [n] or [o] button to 
specify the number of prints.
3Press the SET button.
4 Select PRINT, and press the SET 
button.
hPrinting begins.
HINT
To cancel printing
1During printing, press the [o] button.
hThe Confirm Cancel Printing Screen appears.
2Select “YES”, and press the SET button.
hIf “EXIT” is selected and the SET button is pressed, printing resumes.
OKOK
Print this image?Print this image?
COPIES1
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							107English
DIRECT PRINTING
To print all the images (all images)
Print all of the images.
1 Complete the printing setup (page 103).
2 Press the MENU button.
hThe PictBridge Menu appears.
3 Select PRINT ALL IMAGES, and 
press the SET button.
hThe Print All Images Screen 
appears.
4 Select “PRINT”, and press the SET 
button.
hPrinting begins.
CAUTION
Printing is not possible if there are more than 999 still images in the 
card.
iDelete unwanted images before printing.
PictBridge MENU
PRINT IMAGEPRINT ALL IMAGESDPOF
PRINT
EXIT
PRINT
PRINT
Print all images?Print all images?
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							English108
To print the images that are set to print (print reserved images)
Procedure to print all the images that are set to print.
1 Make the print settings (page 74), and complete the printing setup 
(page 103).
2 Press the MENU button.
hThe PictBridge Menu appears.
3 Select DPOF, and press the SET 
button.
hThe Print Scheduled Images 
Screen appears.
4 Select “PRINT”, and press the SET 
button.
hPrinting begins.
hPrinting begins about 1 minute after 
the SET button is pressed.
HINT
iIn step 2, if you press the [l] or [m] button, you can confirm the images 
that are set to print and their DPOF settings.
CAUTION
iReserved images printing is not possible if a printer is used that does not 
support your camera’s DPOF function.
PictBridge MENU
PRINT IMAGEPRINT ALL IMAGESDPOF
Print the DPOF images?Print the DPOF images?
PRINT
EXIT
PRINT
PRINT
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							109English
DIRECT PRINTING
To change the printer settings and print images 
(change printer settings)
Images are printed according to settings specified by the camera, such as 
paper type, size, layout, printing quality, etc.
1 Complete the printing setup (page 103).
2 Select the printer settings tab v, 
and press the SET button.
hThe Printer Settings Menu appears.
DATE STAMP:
Print the date the photo was taken.
MEDIA TYPE:
Specify the type of paper used for 
printing.
PAPER SIZE:
Specify the size of paper used for 
printing.
LAYOUT:
Specify how the images are to be 
arranged on the paper.
QUALITY:
Select the print quality for the 
images.
MEDIA TYPEDATE STAMP
LAYOUT PAPER SIZE
QUALITY
PRINTER SETTINGS MENU
PRINTER VALUE
PRINTER VALUE
PRINTER VALUE
PRINTER VALUE
PRINTER VALUE
Printer Settings tab
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							English110
3 Adjust the printer settings.
1Use the arrow buttons to select a printer setting parameter, and 
press the SET button.
hThe screen to set the selected parameter appears.
2Press the [n] or [o] button to adjust the setting, and press the 
SET button.
hThe selected parameter is set, and you are returned to the Printer 
Settings Menu.
hFollow the same procedure to adjust the other parameters, as 
desired.
hThe contents of the settings that can be made for each parameter 
will differ depending on the printer.

hThe images will be printed according to the settings specified on the 
printer side.
4 Select “EXIT”, and press the SET button.
hYou are returned to the Printing Mode Screen.
HINT
iThe parameters that are displayed on the Printer Settings Menu will differ 
depending on the printer that is connected.
iTo use printer functions which do not appear on your camera’s Printer 
Settings Menu, select “PRINTER VALUE”.
iIf a function set by the camera is not available in the printer, the camera’s 
printer settings will automatically change to “PRINTER VALUE”.
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							111English
APPENDICES
COMMONLY ASKED QUESTIONS
If you have a question about the camera operation, you might find the answer 
in this compilation of commonly asked questions.
Question Answer Action
PowerWhy doesn’t the 
power turn on?Due to cold 
temperatures, the 
batteries 
temporarily lost 
their power.Place the camera in 
your pocket to warm 
it up before using it.
Why are the 
batteries 
consumed so 
quickly?The ambient 
temperature is 
ver y low.Keep the batteries in 
an environment of 
10 to 40°C (50 to 
104°F).
The battery life 
has expired.Replace with new 
batteries.
Why does the 
 icon 
appear?The remaining 
battery power is 
low.Use the separately 
sold AC adaptor, or 
replace the batteries 
with new ones.
ShootingWhy doesn’t the 
touch sensor 
work?You are wearing 
gloves.Remove the glove 
from the hand 
pressing the shutter 
button.
Why doesn’t the 
flash operate?The camera has 
determined that 
the image is bright 
enough and the 
flash is not 
necessary.Not a malfunction. 
Capture the image; 
the camera will 
determine when the 
flash is necessary.
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							English112
ShootingAre the settings 
retained even 
after the camera 
is turned off?— All settings except 
the self-timer and 
the exposure 
correction are 
retained even after 
the camera is turned 
off.
Which resolution 
setting should I 
use?— Select the resolution 
setting according to 
the intended use:
kDz: 
Appropriate for 
printing letter-size or 
larger, and for 
printing a close-up 
of part of a photo 
(trimming).
t: For printing 
standard photo 
(photo service) 
sizes.
[: For photos 
displayed on a web 
page, or sent as e-
mail attachments.
What is the 
difference 
between the 
digital zoom and 
the optical zoom?— Because shooting 
with the optical 
zoom uses the 
optics of a physical 
lens, you can shoot 
without losing 
minute details in the 
image. The digital 
zoom, on the other 
hand, works by 
magnifying a portion 
of the image that 
hits the CCD sensor 
and may produce a 
coarser image. Question Answer Action
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							113English
COMMONLY ASKED QUESTIONS
ShootingHow can I get the 
distant view into 
focus?— Set the scene 
function to the 
landscape \ 
mode when 
photographing.
Or, set the focus 
range setting to 
manual focus -, 
and set the distance 
to 
∞.
MonitorWhen used in 
cold weather, why 
does the image 
seem to leave 
traces as it 
moves?Condition due to 
the liquid crystals.Not a malfunction. 
Spots that appear in 
the monitor only 
appear in the 
monitor and will not 
be recorded with the 
images.
Why does the 
displayed image 
contain some red, 
blue and green 
dots, or why are 
black spots 
visible?Question Answer Action
Downloaded From camera-usermanual.com Sanyo Manuals 
						

							English114
Viewing 
imagesWhy is the image 
too bright?The subject was 
too bright.When capturing an 
image, devise a way 
to compensate for a 
bright subject, for 
example, by 
changing the 
shooting angle.
Why is the image 
out of focus?The focus is not 
locked properly.Hold the camera 
correctly, and when 
the image is locked 
in focus, gently 
press the shutter 
button all the way to 
capture the image.
Why doesn’t the 
zoom jump 
playback work?Zoom jump 
playback does not 
work for an image 
that was created 
from a magnified 
portion of a zoom 
jump image, or for 
video clips. Not a malfunction.
Why is there no 
image (z is 
shown)?This may happen 
when trying to 
play back images 
stored on a card 
from a different 
digital camera.Play back images 
that were recorded 
on a card using this 
camera.
Why do vertical 
stripes appear?If a bright subject 
is shot in the 
video clip 
recording mode, 
vertical stripes 
may appear on 
the monitor or in 
the image.Not a malfunction. Question Answer Action
Downloaded From camera-usermanual.com Sanyo Manuals