Sharp AR 5520N User Manual

MODEL: AR-5516N
AR-5520N
DIGITAL MULTIFUNCTIONAL SYSTEM
OPERATION GUIDE
Downloaded From ManualsPrinter.com Manuals 

Downloaded From ManualsPrinter.com Manuals 

1
CONTENTS
1BEFORE USING THE MACHINE
PART NAMES AND FUNCTIONS ..................... 4
●OPERATION PANEL ........................................6
POWER ON AND OFF....................................... 8
●POWER ON ......................................................8
●POWER OFF ....................................................8
LOADING PAPER.............................................. 9
●PAPER ..............................................................9
●LOADING...

2
5USER SETTINGS
ADJUSTING THE AUTOMATIC EXPOSURE 
LEVEL .............................................................. 56
ABOUT THE WEB PAGE ................................ 57
●HOW TO ACCESS THE WEB PAGE .............57
●MONITORING THE STATUS OF THE 
MACHINE (Status TAB) ...............................58
●CONFIGURING THE NETWORK SETTINGS 
(Network Settings TAB) ................................60
●MANAGING THE SYSTEM INFORMATION 
(System Information TAB) ............................66
CUSTOMISING...

3
INTRODUCTION
This manual describes the copier, printer, and scanner functions of the AR-5516N/AR-5520N digital multifunctional 
system. And also explains how to configure network settings to enable the machine to be used as a network printer/
scanner.
• Where AR-XXXX appears in this manual, please substitute the name of your model for XXXX. For the name 
of your model, see DIFFERENCES BETWEEN MODELS in the Start Guide.
 The screen images and procedures that appear in this manual are mainly for Windows...

4
1
Chapter 1
BEFORE USING THE MACHINE
This chapter contains basic information that should be read before using the machine.
PART NAMES AND FUNCTIONS
Glass cleaner (when the RSPF is installed)
Use to clean the original scanning glass. (p.101)
Document feeder cover (when the RSPF is 
installed) /document cover
Open to make copies from the document glass. 
(p.15)
Document glass
Place an original that you wish to scan face down 
here. (p.15)
Handles
Use to move the machine.
Power switch
Press to turn the...

5
BEFORE USING THE MACHINE
1
Document feeder tray (when the RSPF is 
installed)
Place the original(s) that you wish to scan face up 
here. Holds up to 40 originals. (p.17)
Original guides (when the RSPF is installed)
Adjust to the size of the originals. (p.16)
Feeding roller cover (when the RSPF is 
installed)
Open to remove misfed originals. (p.91)
Right side cover (when the RSPF is installed)
Open to remove misfed originals. (p.91)
Exit area (when the RSPF is installed)
Originals exit the machine here...

6
BEFORE USING THE MACHINE
OPERATION PANEL
SCAN MENU key
Use to scan by means of the provided Button 
Manager software. (p.49)
SCAN key ( ) / indicator
Press to switch the machine to scanner mode and 
scan by means of the provided Button Manager 
software. (p.47) The indicator blinks during 
scanning and transmission of the scanned data.
ON LINE key ( ) / indicator
Press to toggle the machine between online and 
off-line. The indicator lights up when the machine 
is online, and goes off when the machine...

7
BEFORE USING THE MACHINE
1
Display
Shows the set number of copies, as well as the copy 
ratio, system setting function or setting code, or an 
error code when an error occurs.
Numeric keys
Use to select the desired copy quantity or to make 
system setting entries. (p.19)
To display the total number of pages output by the 
machine, hold the [0] key down. (p.99)
CLEAR key ( )
Clears the copy quantity display or terminates a 
copy run.
INTERRUPT key ( ) / indicator
Interrupts a copy run. (p.28)
Light and...

8
POWER ON AND OFF
The power switch is located on the left side of the machine.
POWER ON
Turn the power switch to the ON 
position.
It will take about 45 
seconds for the machine 
to warm up. While the 
machine is warming up, 
the POWER SAVE 
indicator ( ) will blink. 
(The POWER SAVE 
indicator ( ) will go off 
when the machine is 
ready to copy.)
However, you can make desired settings and press 
the [START] key ( ) during warm-up. Copying will 
start after warm-up.
POWER OFF
Make sure that the machine...