Sharp AR M165E User Manual
Here you can view all the pages of manual Sharp AR M165E User Manual. The Sharp manuals for Printer are available online for free. You can easily download all the documents as PDF.
Page 51
![Page 51
49
COPY FUNCTIONS
4
SELECTING THE TRAY
By default the auto paper select function (page 47) operates, and thus the appropriate tray is automatically selected
when the original is placed on the document glass or in the document feeder tray, or when the original size is
specified. If you wish to use a tray other than the automatically selected tray (for example you wish to enlarge or
reduce the copy or use the bypass tray), press the [PAPER SELECT] key to select the desired tray.
Auto tray switching
If...](http://img.usermanuals.tech/thumb/68/37856/w300_Sharp_AR-M165E-50.png "Page 51
49
COPY FUNCTIONS
4
SELECTING THE TRAY
By default the auto paper select function (page 47) operates, and thus the appropriate tray is automatically selected
when the original is placed on the document glass or in the document feeder tray, or when the original size is
specified. If you wish to use a tray other than the automatically selected tray (for example you wish to enlarge or
reduce the copy or use the bypass tray), press the [PAPER SELECT] key to select the desired tray.
Auto tray switching
If...")
49 COPY FUNCTIONS 4 SELECTING THE TRAY By default the auto paper select function (page 47) operates, and thus the appropriate tray is automatically selected when the original is placed on the document glass or in the document feeder tray, or when the original size is specified. If you wish to use a tray other than the automatically selected tray (for example you wish to enlarge or reduce the copy or use the bypass tray), press the [PAPER SELECT] key to select the desired tray. Auto tray switching If...
Page 52
![Page 52
50
COPY FUNCTIONS
SELECTING THE ORIGINAL SIZE
If you loaded a non-standard size* original or the original size was not correctly detected, set the original size manually.
Perform the following steps after placing the document in the document feeder tray or on the document glass.
1Press the [SPECIAL FUNCTION] key.
The special function
screen will appear.
2Select ORIG. SIZE ENTER from the
menu with the [ ] or [ ] key.
3Press the [OK] key.
The original size selection
screen will appear.
4Select the...](http://img.usermanuals.tech/thumb/68/37856/w300_Sharp_AR-M165E-51.png "Page 52
50
COPY FUNCTIONS
SELECTING THE ORIGINAL SIZE
If you loaded a non-standard size* original or the original size was not correctly detected, set the original size manually.
Perform the following steps after placing the document in the document feeder tray or on the document glass.
1Press the [SPECIAL FUNCTION] key.
The special function
screen will appear.
2Select ORIG. SIZE ENTER from the
menu with the [ ] or [ ] key.
3Press the [OK] key.
The original size selection
screen will appear.
4Select the...")
50 COPY FUNCTIONS SELECTING THE ORIGINAL SIZE If you loaded a non-standard size* original or the original size was not correctly detected, set the original size manually. Perform the following steps after placing the document in the document feeder tray or on the document glass. 1Press the [SPECIAL FUNCTION] key. The special function screen will appear. 2Select ORIG. SIZE ENTER from the menu with the [ ] or [ ] key. 3Press the [OK] key. The original size selection screen will appear. 4Select the...
Page 53
![Page 53
51
COPY FUNCTIONS
4
USING THE BYPASS TRAY TO COPY A SPECIAL SIZE ORIGINAL
When the bypass tray is being used for copying and an original that is placed on the document glass is detected as
being a special size, the display will prompt the user to set the original size. To make a copy in this type of situation,
follow the steps below.
1Load paper in the bypass tray and
place the original on the document
glass.
2Touch the [PAPER SELECT] key and
then select the bypass tray.
A message will appear asking...](http://img.usermanuals.tech/thumb/68/37856/w300_Sharp_AR-M165E-52.png "Page 53
51
COPY FUNCTIONS
4
USING THE BYPASS TRAY TO COPY A SPECIAL SIZE ORIGINAL
When the bypass tray is being used for copying and an original that is placed on the document glass is detected as
being a special size, the display will prompt the user to set the original size. To make a copy in this type of situation,
follow the steps below.
1Load paper in the bypass tray and
place the original on the document
glass.
2Touch the [PAPER SELECT] key and
then select the bypass tray.
A message will appear asking...")
51 COPY FUNCTIONS 4 USING THE BYPASS TRAY TO COPY A SPECIAL SIZE ORIGINAL When the bypass tray is being used for copying and an original that is placed on the document glass is detected as being a special size, the display will prompt the user to set the original size. To make a copy in this type of situation, follow the steps below. 1Load paper in the bypass tray and place the original on the document glass. 2Touch the [PAPER SELECT] key and then select the bypass tray. A message will appear asking...
Page 54
52 REDUCING OR ENLARGING A COPY There are three ways to enlarge and reduce copies: Automatic selection of a ratio according to the paper size: Auto ratio selection Specifying a ratio from 25% to 400%: Preset ratios/zoom Selecting the vertical and horizontal ratios separately: XY zoom AUTOMATIC RATIO SELECTION 1Place the original in the document feeder tray or on the document glass. The original size will appear in the display. If the correct size does not appear, see SELECTING THE ORIGINAL SIZE...
Page 55
![Page 55
53
COPY FUNCTIONS
4
3Select a preset ratio with the [ ] or
[ ] key, or set the ratio (zoom) with
the [ ] or [ ] key.
[ ] key: Select a larger preset ratio
[ ] key: Select a smaller preset ratio
[ ] key: Decrease the ratio in increments of 1%
[ ] key: Increase the ratio in increments of 1%
Preset reduction ratios are: 86%, 81%, 70%, 50%
and 25% (95%, 77%, 64%, 50% and 25%). 25% can
only be selected when the original is placed on the
document glass.
Preset enlargement ratios are: 115%, 122%, 141%,...](http://img.usermanuals.tech/thumb/68/37856/w300_Sharp_AR-M165E-54.png "Page 55
53
COPY FUNCTIONS
4
3Select a preset ratio with the [ ] or
[ ] key, or set the ratio (zoom) with
the [ ] or [ ] key.
[ ] key: Select a larger preset ratio
[ ] key: Select a smaller preset ratio
[ ] key: Decrease the ratio in increments of 1%
[ ] key: Increase the ratio in increments of 1%
Preset reduction ratios are: 86%, 81%, 70%, 50%
and 25% (95%, 77%, 64%, 50% and 25%). 25% can
only be selected when the original is placed on the
document glass.
Preset enlargement ratios are: 115%, 122%, 141%,...")
53 COPY FUNCTIONS 4 3Select a preset ratio with the [ ] or [ ] key, or set the ratio (zoom) with the [ ] or [ ] key. [ ] key: Select a larger preset ratio [ ] key: Select a smaller preset ratio [ ] key: Decrease the ratio in increments of 1% [ ] key: Increase the ratio in increments of 1% Preset reduction ratios are: 86%, 81%, 70%, 50% and 25% (95%, 77%, 64%, 50% and 25%). 25% can only be selected when the original is placed on the document glass. Preset enlargement ratios are: 115%, 122%, 141%,...
Page 56
54 SELECTING THE VERTICAL AND HORIZONTAL COPY RATIOS SEPARATELY (XY zoom copying) Separate ratio settings can be selected for the length and width of a copy. Example: Reduction only in the horizontal direction This feature cannot be used with the 2 in 1 / 4 in 1 feature or card shot feature (when the dual function board is installed). To use the XY zoom feature and the dual page copy feature simultaneously, set the dual page copy feature first and then the XY zoom feature. (Enlargement cannot be...
Page 57
![Page 57
55
COPY FUNCTIONS
4
7Press the key.
The vertical ratio can now be selected.
8Set the vertical ratio with the [ ], [ ],
[ ], or [ ] keys.
A preset ratio can be selected
with the [ ] or [ ] keys. The
ratio can be adjusted in
increments of 1% with the [ ]
or [ ] keys.
To change the copy ratio in the
horizontal direction again, press
the key.
9Press the [OK] key.
You will return to the base
screen.
10Make sure that the desired paper tray
is selected.
If the auto paper select function has been...](http://img.usermanuals.tech/thumb/68/37856/w300_Sharp_AR-M165E-56.png "Page 57
55
COPY FUNCTIONS
4
7Press the key.
The vertical ratio can now be selected.
8Set the vertical ratio with the [ ], [ ],
[ ], or [ ] keys.
A preset ratio can be selected
with the [ ] or [ ] keys. The
ratio can be adjusted in
increments of 1% with the [ ]
or [ ] keys.
To change the copy ratio in the
horizontal direction again, press
the key.
9Press the [OK] key.
You will return to the base
screen.
10Make sure that the desired paper tray
is selected.
If the auto paper select function has been...")
55 COPY FUNCTIONS 4 7Press the key. The vertical ratio can now be selected. 8Set the vertical ratio with the [ ], [ ], [ ], or [ ] keys. A preset ratio can be selected with the [ ] or [ ] keys. The ratio can be adjusted in increments of 1% with the [ ] or [ ] keys. To change the copy ratio in the horizontal direction again, press the key. 9Press the [OK] key. You will return to the base screen. 10Make sure that the desired paper tray is selected. If the auto paper select function has been...
Page 58
56 TWO-SIDED COPYING TWO-SIDED COPYING The machine is capable of the following types of automatic two-sided copying. The copy paper is turned over automatically, allowing two-sided copying to be accomplished with ease. *1 The optional single pass feeder (AR-SP6N) or reversing single pass feeder (AR-RP6N) is required. *2 The optional reversing single pass feeder (AR-RP6N) is required. Model Two-sided copy typeAR-M161/AR-M162AR-M165/AR-M206/AR-M207Page One-sided originals to two-sided copies (using the...
Page 59
57 COPY FUNCTIONS 4 TWO-SIDED COPYING OF ONE-SIDED ORIGINALS Paper sizes that can be used are A3, B4, A4, A4R, B5, B5R, A5, 11 x 17, 8-1/2 x 14, 8-1/2 x 13, 8-1/2 x 11 and 8-1/2 x 11R. Automatic two-sided copying is not possible when the bypass tray is used. Copying from the SPF 1Make sure that an original does not remain on the document glass, and then adjust the original guides to the width of your originals and place the originals face up in the document feeder tray. If you placed an odd...
Page 60
![Page 60
58
COPY FUNCTIONS
Copying from the document glass
1Place the original for the front side of
the copy on the document glass, and
close the SPF.
2Press the [2-SIDED COPY] key.
The duplex mode selection
screen appears.
3Select 1 to 2 with the [ ] or [ ] key,
or with the [2-SIDED COPY] key.
4If you wish to have the orientation of
the image on the back of the copy
paper be opposite the orientation of
the image on the front, set BINDING
CHANGE to ON with the [ ] or [ ]
key.
5Press the [OK] key.
You...](http://img.usermanuals.tech/thumb/68/37856/w300_Sharp_AR-M165E-59.png "Page 60
58
COPY FUNCTIONS
Copying from the document glass
1Place the original for the front side of
the copy on the document glass, and
close the SPF.
2Press the [2-SIDED COPY] key.
The duplex mode selection
screen appears.
3Select 1 to 2 with the [ ] or [ ] key,
or with the [2-SIDED COPY] key.
4If you wish to have the orientation of
the image on the back of the copy
paper be opposite the orientation of
the image on the front, set BINDING
CHANGE to ON with the [ ] or [ ]
key.
5Press the [OK] key.
You...")
58 COPY FUNCTIONS Copying from the document glass 1Place the original for the front side of the copy on the document glass, and close the SPF. 2Press the [2-SIDED COPY] key. The duplex mode selection screen appears. 3Select 1 to 2 with the [ ] or [ ] key, or with the [2-SIDED COPY] key. 4If you wish to have the orientation of the image on the back of the copy paper be opposite the orientation of the image on the front, set BINDING CHANGE to ON with the [ ] or [ ] key. 5Press the [OK] key. You...