Sharp AR M201 User Manual

3

SCAN
31CONTENTSINDEX
Button Manager Settings(part 1)
Once installed, Button Manager normally runs in the background in the Windows operating system. If you need to change Button 
Manager settings, fo llow the steps below.
For details on Button Manager se ttings, see Button Manager Help.
☞Outline of Button Manager
1Right-click the Button Manager icon ( ) on the 
task bar, and select Settings from the pop-up 
menu.
The setting screen of  Button Manager will open.
2
Click the tab of the scan  menu that...

3

SCAN
32CONTENTSINDEX
Button Manager Settings(part 2)
4
Set up the Colour Mode, Edge and other 
scan settings in the  Scan Setup area.
The tab names are initially SC1: to SC6:. To assign a name to 
a tab, click the Menu Name button and enter the desired name.
After entering the name, click the Apply button or the 
OK button in the setting scr een. The assigned names will 
appear in the machine display when you select a scan 
menu at the machine. (Example: SC1:xxxxx)
5
Click the OK button.
This...

4

TROUBLESHOOTING
33CONTENTSINDEX
Troubleshooting(part 1)
If you experience difficulty using the machine, check the following troubleshooting guide before calling for service. 
Many problems can be easily resolved by  the user. If you are unable to solve the prob lem using the troubleshooting guide, turn off 
the power switch and unplug the  machine, and contact your authorised service representative.
PRINTING AND SCANNING PROBLEMS
In addition to this section, troubleshooting information can al so be...

4

TROUBLESHOOTING
34CONTENTSINDEX
Troubleshooting(part 2)
ProblemCause and solutionPage
The machine does not print.
The printer driver has not  been installed properly.
→ Follow these steps to che ck and see if the printer driver is installed.
1 Click the start button, cl ick Control Panel, click P rinters and Other Hardware, 
and then click Printers and Faxes.
●On Windows Vista, click the  Start button, select Control Panel, and then click 
Printer.
●On Windows 98/Me/2000, cli ck the Start button,...

4

TROUBLESHOOTING
35CONTENTSINDEX
Troubleshooting(part 3)
ProblemCause and solutionPage
Printing is slow.Simultaneous use of two or more application software programs.
→ Start printing after quitting all unus ed application software programs.-
The printed image is light and 
uneven.
The paper is loaded so that printing takes place on the back side of the paper.
→ Some paper types have a front and back side.  If the paper is loaded so that printing 
takes place on the back side,  toner will not adhere...

4

TROUBLESHOOTING
36CONTENTSINDEX
Troubleshooting(part 4)
ProblemCause and solutionPage
The printed image is skewed or it 
runs off the paper.
The orientation of document setting is not correct.
→ Click the Paper tab in t he printer driver setup scree n, and verify if the Image 
Orientation option is se t to your requirements.
-
Paper is not loaded properly.
→ Make sure the paper  is properly loaded.-
You did not correctly specify t he margins in the application.
→ Check the layout of the do cument...

4

TROUBLESHOOTING
37CONTENTSINDEX
Troubleshooting(part 5)
ProblemCause and solutionPage
Poor scanning quality.
You have not specified a suitable value for the B/W Threshold setting.
→ If you are scanning with a TWAIN-compliant  application and are using Red, Green 
or Blue mode from Light S ource menu, make sure that a suitable value is specified 
for the B/W Threshold settin g. A larger threshold value makes your output darker, 
while a small threshol d value makes it lighter. To adjust the threshold...

4

TROUBLESHOOTING
38CONTENTSINDEX
Troubleshooting(part 6)
ProblemCause and solutionPage
Unable to scan the image.
If scanning is not possible, shut down your computer,  turn off the machines 
power switch, and unplug  the machines power cord.  Next, start your computer, 
restore power to the machine, and try  scanning again. If scanning is still not 
possible, check the  following items.
-
Your application is not  TWAIN/WIA compliant.
→ If your application is not TW AIN/WIA compliant, scanning  will...

4

TROUBLESHOOTING
39CONTENTSINDEX
If a Notice Page is printed
If you find that a notice page has been printed at the end of a print job, the print data received from the computer has not be en 
printed as specified.
If the following Notice Page is printed, disable the ROPM functi on by removing the checkmark from ROPM in the Configuration 
tab of the printer driver se tup screen. If you wish to use the ROPM f unction, set the print quality to Draft.
*****************************...

5

PRINTER DRIVER FEATURES
40CONTENTSINDEX
Printer Driver Features(part 1)
(continued)
*1 Will be reduced to A4 (letter) size or the specified size before printing.
*2
This initial setting may vary depending on your operating system se ttings. For information on each setting, see Help in the printer driver setup screen.
TabSettingSelectionsInitial setting
MainCopies1 to 9991
CollateOn/OffOn
N-Up Printing1-Up/2-Up/4-Up1-Up
BorderOn/OffOff
Document Style1-Sided/2-Sided (Book)/2-Sided (Tablet)1-Sided
User...