Sharp Lc 20s4e Operation Manual

LC-20S4E
SHARP CORPORATION
LCD COLOUR TELEVISION
LCD-FARBFERNSEHGERÄT
TÉLÉVISION COULEUR À ÉCRAN
À CRISTAUX LIQUIDES (LCD)
TELEVISORE A COLORI LCD
TELEVISIÓN EN COLOR LCD
LCD-KLEURENTELEVISIE
LC-20S4E
OPERATION MANUAL
BEDIENUNGSANLEITUNG
MODE D’EMPLOI
MANUALE DI ISTRUZIONI
MANUAL DE MANEJO
GEBRUIKSAANWIJZING
ENGLISH
DEUTSCH
FRANÇAIS
NEDERLANDS
ITALIANO
Printed in Malaysia
Gedruckt in Malaysia
Imprimé en Malaisie
Stampato in Malesia
Impreso en Malasia
Gedrukt in Maleisië
TINS-B892WJZZ05P09-MA-NM
ESPAÑOL...

SPECIAL NOTE FOR USERS IN THE UK
The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 3A fuse. Should the fuse need to
be replaced, a BSI or ASTA approved BS 1362 fuse marked 
 or ASA and of the same rating as above, which is also indicated
on the pin face of the plug, must be used.
Always refit the fuse cover after replacing the fuse. Never use the plug without the fuse cover fitted.
In the unlikely event of the socket outlet in your home not being compatible...

  1
Contents
LC-20S4E
LCD COLOUR TELEVISION
ENGLISH
OPERATION MANUAL
ENGLISH
Supplied Accessories ............................................... 1
Dear SHARP Customer ............................................. 2
Important Safety Precautions .................................. 2
Preparation ................................................................ 3
Setting the TV ....................................................... 3
How to Fix the Cables .......................................... 3
How to...

2  
Important Safety Precautions
Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of trouble-
free operation of your product, please read the Important Safety Precautions carefully before using this product.
Dear SHARP Customer
•Cleaning—Unplug the AC cord
from the AC outlet before cleaning
the product. Use a damp cloth to
clean the product. Do not use
liquid cleaners or aerosol
cleaners.
•Stand—Do not place the product
on an unstable cart, stand, tripod
or...

  3
Preparation
Setting the TV
NOTE
•Unplug the AC cord from the LCD TV set and power outlet when the LCD TV set is not to be used for a long period of time.
•Please ensure your 75-ohm coaxial cable is fitted with a DIN 45325 (IEC169-2) coaxial plug and plug it into the antenna terminal at the side
of the LCD TV set (antenna cable not supplied).
How to Fix the Cables
Secure cables and cords with the supplied
cable clamps so that they do not get caught
when mounting the cover.
Cable 
clamps
How to Prevent...

4  
Installing Batteries in the Remote Control
Before using the LCD TV set for the first time, install the two “AAA” size batteries (supplied) in the remote control. When the
batteries become depleted and the remote control fails to operate, replace the batteries with new “AAA” size batteries.
Caution!
Precautions regarding batteries
Improper use of batteries can result in a leakage of chemicals and/or explosion. Be sure to follow the instructions below.
•Different types of batteries have different...

  5
Part Names of the Remote Control
OK, Programme Table (P. 8, 12)
Yellow, Sleep Timer (P. 12, 14) Blue, Status Display (P. 12, 14)
Turns on the status display when 
the menu is not displayed.  Channel Select
TV input mode: Selects the channel.
This LCD TV set allows you to select
up to 200 channels (0 to 199).
Teletext mode: Selects the page. (P. 14)MENU (P. 8)
Displays the TV menu.
Returns to the previous screen.  Red, Picture menu (P. 9, 14)Upwards / Downwards 
Selection, Zoom Display 
Function...

6  
Part Names of the Main Unit
OPC sensor
Remote sensorOPC (Optical Picture Control) indicator
The OPC indicator lights up green when the “Backlight” is set
to “Auto (OPC)”. (See page 12.)
STANDBY/ON indicator
The STANDBY/ON indicator lights up green when the power is on, and red when
in the standby mode (the indicator will not light when the main power is off).
Upper control panel
■ Using the control panel of the main unit
• (Input), P ()/() (Channel), i (–)/(+) (Volume) and MENU on the control panel...

  7
Decoder
VCR
DVD Player
To EXT1 terminal
To EXT2 terminal
21-pin Euro-SCART connector
Antenna terminal
Audio amplifier
DVD Player
VCR
Camcorder
Home video game system
To AUDIO OUT terminal
Audio/Video cable
Video
Audio (L)
Audio (R)
Audio (L)
Audio (R)
S-Video cable 
S-Video
Audio cable
EXT1
EXT2
AUDIO OUT
RGB (21-pin Euro-SCART)
VIDEO
AUDIO (L)
AUDIO (R)
AUDIO OUT (L)
AUDIO OUT (R) S-VIDEO
Connecting External Devices
Terminals
You can enjoy picture and sound by connecting devices, such as a VCR or...

8  
First Installation
When you turn on the LCD TV set for the first time, the First
Installation routine, which makes installation easier, is
activated. Using this routine, you can select the on-screen
display language, clock setup and automatically search for
and store all the receivable TV channels.
NOTE
•You can also execute the First Installation routine by selecting
“First installation” on the Setup Menu screen.
For selecting the menu items, see the right column.
Press  (MAIN POWER) on the LCD TV...