Sharp Lc 20sd5e Operation Manual

							
GB -29

Troubleshooting
Appendix
Cautions regarding use in high and low temperature environmentsWhen the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear slightly delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal.Do not leave the unit in a hot or cold location. Also, do not leave the \
unit in a location exposed to direct sunlight or near a heater, as this may cause the cabinet to deform and the LCD panel to malfunction.Storage temperature: –20°C to +60°C.
•
•
ProblemPossible Solution
No power.•Check if you pressed  on the TV. (See page 8.)If the indicator on the TV lights up red, press  on the remote control unit. Is the AC cord disconnected? (See page 3.)Check if you pressed  on the remote control unit. (See page 8.)
•
••
Unit cannot be operated.•External influences such as lightning, static electricity, etc., may cause  improper operation. In this case, operate the unit after first turning the power off, or unplugging the AC cord and re-plugging it in after 1 or 2 minutes.
•
Remote control unit does not operate.•Are batteries inserted with polarity (+, −) aligned? (See page 4.)Are batteries worn out? (Replace with new batteries.)Are you using it under strong or fluorescent lighting?Is a fluorescent light illuminating the remote control sensor? 
••••
Strange colour, light colour, or dark, or colour misalignment.•Adjust the picture tone. (See page 10.)Is the room too bright? The picture may look dark in a room that is too bright.Check the colour system setting. (See page 13.)
•••
Power is suddenly turned off.•The unit’s internal temperature has increased.Remove any objects blocking vent or clean.Check the Auto power off setting. (See page 14.)Is sleep timer set? Press SLEEP on the remote control unit until it sets to Off.
•
••
No picture.•Is connection to other components correct? (See page 7.)Is input signal type selected correctly after connection? (See page 12.)Is the correct input source selected? (See page 5.)Is picture adjustment correct? (See page 10.)Is the antenna connected properly? (See page 3.)
•••••
No sound.•Is the volume too low? (See page 5 and 6.)Make sure that headphones are not connected. (See page 6.)Check if you pressed  on the remote control unit. (See page 5.)
•••
The TV sometimes makes a cracking sound.•This is not a malfunction. This happens when the cabinet slightly expand\
s and contracts according to change in temperature. This does not affect the TV’s performance.
•
 
						

							
GB -30

Appendix
Specifications
As a part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. There may be some deviations from these values in individual units.
NOTERefer to inside back cover for dimensional drawings.
•
•
Item20” LCD COLOUR TV, Model: LC-20SD5E, LC-20SD5S
LCD panel20” Advanced Super View & BLACK TFT LCD
Number of dots921,600 dots (640 × 480 × 3 dots)
Video Colour SystemPAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60
TV FunctionTV-StandardAnalogueCCIR (B/G, I, D/K, L, L’)
DigitalDVB-T (2K/8K OFDM)
Receiving ChannelVHF/UHFE2–E69ch, F2–F10ch, I21–I69ch, IR A–IR Jch, (Digital: E5-E69ch)
CATVHyper-band, S1–S41ch
TV-Tuning SystemAuto Preset 99 ch, Auto Label, Auto Sort
STEREO/BILINGUALNICAM/A2
Brightness430 cd/m2
Backlight life60,000 hours (at Backlight Standard position)
Viewing anglesH : 170°  V : 170°
Audio amplifier2 W × 2
Speaker71 mm × 30 mm
TerminalsRearAntenna inputUHF/VHF 75Ω Din type (Analogue & Digital)
EXT1 (RGB)SCART (AV input, RGB input, TV output)
EXT2 (AV)SCART (AV input/output, Y/C input, TV monitor output)
EXT3S-VIDEO (Y/C input), RCA pin (AV input)
EXT4 (PC)Ø 3.5 mm jack (Audio input), 15 pin mini D-sub (PC/Component)
RS-232C9 pin MINI-DIN male connector
C. I. (Common Interface)EN50221, R206001
OUTPUTRCA pin  (Audio)
HeadphonesØ 3.5 mm jack (Audio output)
OSD languageEnglish/German/French/Italian/Spanish/Dutch/Swedish/Portuguese/Finnish/Turkish/Greek/Russian/Polish
Power RequirementAC 220–240 V, 50 Hz
Power Consumption74 W (1.0 W Standby) (Method IEC60107)
Weight5.5 kg (Display only), 6.2 kg (Display with stand)
Operating temperature0°C to +40°C
 
						

							
GB -3

A. Information on Disposal for Users (private households)
.  In the European Union
Attention: If you want to dispose of this equipment, please do not use the ordinary dust bin! 
Used electrical and electronic equipment must be treated separately and in accordance with legislation that requires proper treatment, recovery and recycling of used electrical and electronic equipment. Following the implementation by member states, private households within the EU states may return their used electrical and electronic equipment to designated collection facilities free of charge*.  In some countries* your  local retailer may also take back your old product free of charge if you purchase a similar new one. *) Please contact your local authority for further details.
If your used electrical or electronic equipment has batteries or accumulators, please dispose of these separately beforehand according to local requirements.
By disposing of this product correctly you will help ensure that the waste undergoes the necessary treatment, recovery and recycling and thus prevent potential negative effects on the environment and human health which could otherwise arise due to inappropriate waste handling.
2.  In other Countries outside the EU
If you wish to discard this product, please contact your local authorities and ask for the correct method of disposal.  
For Switzerland: Used electrical or electronic equipment can be returned free of charge to the dealer, even if you don’t purchase a new product. Further collection facilities are listed on the homepage of www.swico.ch or www.sens.ch.
B.  Information on Disposal for Business Users
.  In the European Union
If the product is used for business purposes and you want to discard it:
Please contact your SHARP dealer who will inform you about the take-back of the product. You might be charged for the costs arising from take-back and recycling. Small products (and small amounts) might be taken back by your local collection facilities.
For Spain: Please contact the established collection system or your local authority for take-back of your used products.
2.  In other Countries outside the EU
If you wish to discard of this product, please contact your local authorities and ask for the correct method of disposal.
Attention: Your product is marked with this symbol. It means that used electrical and electronic products should not be mixed with general household waste. There is a separate collection system for these products.
End of Life Disposal
IMPORTANT NOTE ON DISENGAGING ADVANCED CHILD LOCK (TV)
If you have forgotten your personal identification number and cannot disengage ADVANCED CHILD LOCK, follow the procedure below. .  Press MENU to display the Menu screen.2 .  Press ◀/▶ to select “Features”.3 .  Press ▲/▼ to select “Child lock”, and press OK.4 .  The PIN input menu is displayed.5 .  Input “3001” with 0 - 9, and press OK.
  The Child lock setting menu is displayed.
ADVANCED CHILD LOCK will now be disengaged.
RESETTING THE PIN (DTV)
If you forget the PIN, reset the PIN..  Press and hold both  − on the TV and press 3 on the remote control simultaneously for a few seconds.
  The factory preset PIN for DTV is set to “0000”.
IMPORTANT NOTE ON RESETTING THE PIN
We suggest that you remove the following instruction from the operation manual to prevent children from 
reading it. As this operation manual is multilingual, we also suggest the\
 same with each language. Keep it 
in a safe space for future reference.
 
						

							
478
403.3
300.
8
434.5
399.5
35
246.
5
68.389.4
157.7
225
100
100
32
317.7

Unit: mm
 
						

							
Printed in PolandGedruckt in PolenImprimé en PologneStampato in PoloniaGedrukt in PolenImpreso en PoloniaJ32C0101A07P06-TH-NO
SHARP ELECTRONICS (Europe) GmbH
Sonnistraße 3, D-20097 Hamburg, Deutschland
Printed on environmentally friendly paperAuf ökologischem Papier gedrucktImprimé sur papier écologiqueStampato su carta ecologicaAfgedrukt op ecologisch papierImpreso en papel ecológicoJ32C0101A SH07/06 P
SHARP ELECTRONICS (Europe) GmbH
Sonnistraße 3, D-20097 Hamburg, Deutschland