Sharp Lc 24le510 Operation Manual

							TINS-E769WJZZ10P08-SP
LC-24LE210E  LC-32LB220E
LC-24LE220E  LC-32LE220E
LC-32LE210E  LC-32LS220ELCD COLOUR TELEVISION
LCD-FARBFERNSEHGERÄT
TÉLÉVISEUR COULEUR À ÉCRAN
CRISTAUX LIQUIDES (LCD)
TELEVISORE A COLORI LCD
LCD-KLEURENTELEVISIE
TELEVISIÓN EN COLOR LCD
TELEVISOR DE CRISTAL LÍQUIDO
Printed in Spain
Gedruckt in Spanien
Imprimé en Espagne
Stampato in Spagna
Gedrukt in Spanje
Impreso en España
Impresso no Espanha
OPERATION MANUAL / BEDIENUNGSANLEITUNG / MODE DEMPLOI / MANUALE DI ISTRUZIONI / 
GEBRUIKSAANWIJZING / MANUAL DE INSTRUCCIONES / MANUAL DE OPERAÇÃOE769WJZZ
1
OPERATION MANUAL
BEDIENUNGSANLEITUNG
MODE D’EMPLOI
MANUALE DI ISTRUZIONI
GEBRUIKSAANWIJZING
MANUAL DE INSTRUCCIONES
MANUAL DE OPERAÇÃO
PIN
SHARP ELECTRÓNICA ESPAÑA S.A
Polígono Industrial Can Sant Joan
Calle Sena 2-10
08174 SANT CUGAT DEL VALLÉS
BARCELONA (ESPAÑA)SHARP CORPORATION
http://www.sharp-eu.com
ENGLISHDEUTSCHFRANÇAISITALIANONEDERLANDSESPAÑOLPORTUGUÊS
LC-24LE210E / LC-32LB220E
LC-24LE220E / LC-32LE220E
LC-32LE210E / LC-32LS220E
®
 
						

							60 
[ 75 ]  200 
[ 87 ] 
91 
[ 587 ]   787 
[ 521.8 ]   700.7 
[ 293.7 ]  395.4 
[ 390 ]  418 
[ 245 ]  294.6   
100 
[ 377 ]  501 [ 38 ] 
35 
[ 40 ] 
45 
[ 62 ] 
66.4 
[ 216 ]  238 
[  ] : LC-24LE210/220E
       LC-32LE210/220E
LC-32LB220E
LC-32LS220E
LC-24LE210E / LC-24LE220E 
LC-32LE210E / LC-32LB220E / LC-32LE220E / LC-32LS220E
SPECIAL NOTE FOR USERS IN THE U.K.
The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 13A fuse. Should 
the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked 
 or 
 and of the same rating as 
above, which is also indicated on the pin face of the plug, must be used.
Always refit the fuse cover after replacing the fuse. Never use the plug without the fuse cover fitted.
In the unlikely event of the socket outlet in your home not being compatible with the plug supplied, cut off the 
mains plug and fit an appropriate type.
DANGER:The fuse from the cut-off plug should be removed and the cut-off plug destroyed immediately and disposed of in 
a safe manner. 
Under no circumstances should the cut-off plug be inserted elsewhere into a 13A socket outlet, as a serious 
electric shock may occur.
To fit an appropriate plug to the mains lead, follow the instructions below:IMPORTANT:The wires in the mains lead are coloured in accordance with the following code:
Blue: Neutral
Brown: Live
As the colours of the wires in the mains lead of this product may not correspond with the coloured markings 
identifying the terminals in your plug, proceed as follows:
•  The wire which is coloured blue must be connected to the plug terminal which is marked N or coloured black.
•  The wire which is coloured brown must be connected to the plug terminal which is marked L or coloured red.
Ensure that neither the brown nor the blue wire is connected to the earth terminal in your three-pin plug.
Before replacing the plug cover make sure that:
•  If the new fitted plug contains a fuse, its value is the same as that removed from the cut-off plug.
•  The cord grip is clamped over the sheath of the mains lead, and not simply over the lead wires.
IF YOU HAVE ANY DOUBT, CONSULT A QUALIFIED ELECTRICIAN.
DivX®
DivX Certified to play DivX video, including premium content.ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX,Inc. This is an official DivX Certified 
device that plays DivX video. Visit www.divx.com for more information and software tools to convert your 
files into DivX video.
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play DivX 
Video-on-Demand (VOD) content. To generate the registration code, locate the DivX VOD section in the 
device setup menu. Go to vod.divx.com with this code to complete the registration process and learn 
more about DivX VOD.
Covered by one or more of the following U.S. Patents:
7,295,673; 7,460,668; 7,515,710; 7,519,274
 
						

							OPERATION MANUAL
Contents  ....................................................................... 1
Introduction  ................................................................ 2
Dear SHARP customer ................................................. 2
Important Safety Precautions  ....................................... 2
Trademarks  .................................................................. 2
Remote Control unit  ..................................................... 3
TV (Front view)  ............................................................. 4
TV (Top and rear view)  .................................................. 4
Preparation  ................................................................. 5
Supplied accessories  ................................................... 5
Attaching the stand unit  ............................................... 5
Optional accessory ....................................................... 5
Inserting the batteries  ................................................... 6 
Using the Remote Control unit  ..................................... 6
Cautions regarding the remote control unit  ................... 6
Quick guide  ................................................................. 7
Initial installation overview  ............................................. 7
Before turning on the power  ......................................... 8
Inserting a CA card ....................................................... 8
Initial Auto Installation  ................................................... 9
Checking quality and signal strength  ............................ 9
Watching TV  ............................................................. 10
Daily operation  ........................................................... 10
Switching on/off  ......................................................... 10
Switching between analogue and digital broadcasts  .. 10
Changing channels ..................................................... 10
Selecting an external video source  ..............................10
Selecting language audio ............................................ 10
Switching subtitle language  ........................................ 10
EPG  ........................................................................... 11
Selecting a programme using EPG  ............................. 11
Teletext  ...................................................................... 12
Using MHEG-5 application (UK only)  .......................... 12
Connecting external devices  ........................... 13
Introduction to connections  ........................................ 13
HDMI connection  ..................................................... 14
Components connection  ......................................... 14
VIDEO connection  ................................................... 14
SCART connection  .................................................. 15
Speaker/amplifier connector  .................................... 15
Connecting a PC  .................................................... 16
HDMI (DVI) connection ................................................ 16
Analogue connection...................................................  16
Menu Operation  ...................................................... 18
What is the menu?  ..................................................... 18
Common operations  ................................................ 18
Basic Adjustment  .................................................. 19
Picture settings  .......................................................... 19
Audio settings  ............................................................ 19
Channel settings  ........................................................ 20
Install channels  ........................................................ 20
Time settings .............................................................. 20
Option settings ............................................................ 21
Lock settings............................................................... 22
Channel list  ................................................................ 22
Selecting the channel you want display  ...................  22
Channel information display (DTV/CADTV only)  ........ 22
Useful viewing functions  .................................... 23
Selecting the picture format  ........................................ 23
Selecting the picture format manually  ...................... 23
Setting when using external devices  ........................... 23
Input source settings  ............................................... 23
Connecting a USB device (Media Player function)  ...... 23
MEDIA PLAYER Function  ......................................... 24
PHOTO mode  ........................................................ 24
MUSIC mode  ......................................................... 24
MOVIE mode  .......................................................... 25
TEXT mode  ............................................................ 25
USB device compatibility  ............................................ 25
Power save settings  ................................................... 25
USB REC and TimeShift functions  ..............................  26
Abbreviation list  .......................................................... 28
Appendix  .................................................................... 29
Troubleshooting  .......................................................... 29
Information on the software license for this product  .... 29
Fixing the TV on a wall .................................................  29
Specifications  ............................................................. 30
Environmental Specifications  ...................................... 30
Information about EU Eco-Label  ................................. 31
End of life disposal  ..................................................... 32 •  The illustrations and the OSD in this operation manual are for explanation purposes and may vary slightly from the actual 
operations.
•  The examples used throughout this manual are based on the LC-32LE220E model.
•  The LC-24LE210E, LC-24LE220E, LC-32LE210E, LC-32LB220E, LC-32LS220E and LC-32LE220E models are compatible 
with high definition broadcasts, H.264 compressed (MPEG4 H.264, MPEG4 AVC, MPEG4 AVC/H.264).
Contents
 1
ENGLISH
ENGLISH
 
						

							•  Cleaning—Unplug the AC cord from the AC outlet before cleaning the product. Use a damp cloth to clean the product. 
Do not use liquid cleaners or aerosol cleaners.
•  Use a soft damp cloth to gently wipe the panel when it is dirty. To protect the panel, do not use a chemical cloth to clean 
it. Chemicals may cause damage or cracks in the cabient of the TV.
•  Water and moisture—Do not use the product near water, such as bathtub, washbasin, kitchen sink, 
laundry tub, swimming pool and in a wet basement.
•  Do not place vases or any other water-filled containers on this product. The water may spill onto the 
product causing fire or electric shock.
•  Stand—Do not place the product on an unstable cart, stand, tripod or table. Doing so can cause the 
product to fall, resulting in serious personal injuries as well as damage to the product. Use only a cart, 
stand, tripod, bracket or table recommended by the manufacturer or sold with the product. When 
mounting the product on a wall, be sure to follow the manufacturer’s instructions. Use only the 
mounting hardware recommended by the manufacturer.
•  When relocating the product placed on a cart, it must be moved with utmost care. Sudden stops, 
excessive force and uneven floor surface can cause the product to fall from the cart.
•  Ventilation—The vents and other openings in the cabinet are designed for ventilation. Do not cover or 
block these vents and openings since insufficient ventilation can cause overheating and/or shorten the 
life of the product. Do not place the product on a bed, sofa, rug or other similar surface, since they can 
block ventilation openings. This product is not designed for built-in installation; do not place the product in an enclosed 
place such as a bookcase or rack, unless proper ventilation is provided or the manufacturer’s instructions are followed.
•  The LCD panel used in this product is made of glass. Therefore, it can break when the product is dropped or impact 
applied. If the LCD panel is broken, be careful not to be injured by broken glass.
•  Heat sources—Keep the product away from heat sources such as radiators, heaters, stoves and other 
heat-generating products (including amplifiers).
•  Headphones—Do not set the volume at a high level. Hearing experts advise against extended listening at 
high volume levels.
•  To prevent fire, never place any type of candle or naked flames on the top or near the TV set.
•  To prevent fire or shock hazard, do not place the AC cord under the TV set or other heavy items.
• Do not display a still picture for a long time, as this could damage the LCD screen.
• There is power consumption always if main plug is connected.
•  Servicing—Do not attempt to service the product yourself. Removing covers can expose you to high 
voltage and other dangerous conditions. Request a qualified person to perform servicing.
The LCD panel is a very high technology product, giving you fine picture details.
Due to the very large number of pixels, occasionally a few non-active pixels may appear on the screen as a fixed point of 
blue, green or red. This is within product specifications and does not constitute a fault.
Precautions when transporting the TV
When transporting the TV, never carry it by holding onto the speakers. Be sure to always carry the TV by two people holding 
it with two hands—one hand on each side of the TV.
Introduction
Dear SHARP customer
Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of trouble-
free operation of your product, please read the Important Safety Precautions carefully before using this product.
Important Safety Precautions
Trademarks
•  “HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.”
•  Manufactured under license from Dolby Laboratories.
•  “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
•  The “HD TV 1080p” Logo is trademark of DIGITALEUROPE.
•  The DVB logo is the registered trademark of the Digital Video Broadcasting—DVB—project.
•  DivX® is a registered trademark of DivX, Inc., and is used under license.
•  The “CI Plus” Logo is a trademark of CI Plus LLP.  
 2
 
						

							Introduction
Remote control unit
1 B Standby/On
 Enter standby mode or turn on the
 power.
2 p Channel information / EPG
 (See pages 11 and 22.)
3 MEDIA PLAYER
 Display the MEDIA PLAYER screen.
4 0–9
 Set the channel in TV mode. 
  Set the page in Teletext mode.
5 A Flashback
 Press to return to the previous
  selected channel or external input
 mode.
6 DTV
 
Change between ATV↔DTV or
 AT V↔ CADTV*
 mode.
7 f Picture format
Change between different picture 
formats (see page 23.)
8 
/ TimeShift / Play-Pause
Activate or deactivate the TimeShift.
Start / stop the reproduction.
9 a/b/c/d (Cursor)
 TV mode: Select a desired item on 
  the setting screen.
 
S / V
 
USB REC and TimeShift mode:
  Rewind and fast forward. 
 
T/L
 
Rewind and forward the recording in 
  units of 5 minutes.
 OK
 Execute a command within the
 menu screen. 
 ATV/DTV or ATV/CADTV mode:
  Display the channel list. 
  (See page 22.) 
10 END
 Exit the menu screen.
11 EPG
 DTV/CADTV: To display EPG
 
(Electronic Programme Guide) screen.
  (See page 11.)17 e Mute
  Switch the sound on and off.
18 2  Audio mode
  Select the sound multiplex mode.
 (See below.)
19  i (+/-) Volume
 i (+) Increase the volume.
 i (-) Decrease the volume.
20 P (r/s)
TV/DTV/CADTV: Select the program 
or move up or down the channel list 
pages. 
Input source: Switch to TV or DTV 
or CADTV input mode. 
Teletext: Move to the next/previous 
page.
21 b Input source
  Select an input source. 
  (See page 10.)
22  RADIO
  DTV/CADTV: Switch between 
  RADIO and digital mode.
  •Due to the large variation in 
  transmitted volume levels in RADIO
  mode, some stations will produce
  distortion if the volume level is set
 too high.
23  PC
  Select PC input source (Analogue
  connection, see page 16.)
24  MENU
  Display the MENU screen.
  (See page 18.)
25  REC
  Starts the USB REC recording.
26 Colour (Red/Green/Yellow/Blue)
  TELETEXT: Select a page. (See
 page 12.)
  DTV/CADTV: The coloured buttons
  are used to select correspondingly
  to the coloured items in the menu
 screen.
27 [ Subtitle for Teletext
  ATV: Subtitles on / off.
  DTV/CADTV: Display the subtitle
  selection screen. (See page 10 
 and 12.)
28  k Reveal hidden Teletext
  (See page 12.)
29 v Top/Bottom/Full
  Switch the Teletext image to Top,
  Bottom or Full.
30 1 Subpage
  (See page 12.) 12  m Teletext
 AT V:  Select the TELETEXT mode
  (See page 12.)
 DTV/CADTV: Select DTV/CADTV
  (MHEG-5) data broadcasting or 
 TELETEXT.
13 FAV
 Shows the favourite list.
14 3 Freeze / Hold
Freeze a picture (TV) or the Teletext 
on the screen (See page 12)
15 SLEEP
 Set the sleep timer on (in units of
  10 min. up to max. 4 hr) and off.
16   REC LIST
  Shows list of recorded programs.
 (See page 28.)
When one of the 5 Nordic countries 
(Sweden, Norway, Finland, Denmark or 
Iceland) is selected in the country setting 
of Auto Installation, DTV channels are 4 
digits. When another country is selected, 
DTV channels are 3 digits
.
*CADTV only Lx220 series.
 3
• Using  2  on the remote control unit
DTV/CADTV mode:
Press 2 to open the multi audio screen. (See page 10.)
Analogue TV mode:
Each time you press 2, the mode switches as illustrated in the following tables:
Signal Selectable items
StereoNICAM STEREO, MONO
Bilingual
NICAM CH A, NICAM CH B, NICAM 
CH AB,  MONO
MonoauralNICAM MONO, MONO
Signal Selectable items
StereoSTEREO, MONO
Bilingual
CH A, CH B, CH AB
MonoauralMONO NICAM TV broadcasts selection
A2 TV broadcasts selection
 
						

							TV (Front view)
TV (Top and rear view)
Remote control sensor B (Standby/On) indicator
Introduction
WARNING•  Excessive sound pressure from earphones and headphones can cause hearing loss.
•  Do not set the volume at a high level. Hearing experts advise against extended listening at high volume levels. a (Power button)
(MENU button)
 b (INPUT SOURCE button)
i(k/l) (Volume buttons) P(r/s) (Programme (channel) buttons)
1 USB terminal
2  COMPONENTS / AV terminals
3 HEADPHONES jack
4  SCART (AV/RGB, Y/C Input) terminal
5 PC Input6  Antenna input terminal
7  DIGITAL AUDIO OUTPUT terminal
8  SERVICE connector (jack 3.5mm)
9  HDMI 1 (HDMI/DVI)
10 HDMI 2 (HDMI/DVI)11 HDMI 3 (HDMI/ DVI)
12  AUDIO input for DVI and PC.  
13  COMMON INTERFACE slot
14  AC INPUT terminal
 4
 
						

							Inserting the stand
Insert the stand into the openings on the bottom of the TV (Hold the stand so it will not drop from the edge 
of the base area).
Insert and tighten the four screws into the four holes on the rear of the TV.
NOTE
• To detach the stand unit, perform the above steps in reverse order.
Remote control unit 
(g1)AC cord (g1)
•  Operation manual (This publication) •  “AA” size zinc-carbon battery (g2) 
Product shape varies in 
some countries.
Preparation
Supplied accessories
Attaching the stand unit
•  Before attaching (or detaching) the stand, unplug the AC cord from the AC INPUT terminal.
•  Before performing work, spread cushioning over the surface on wich you will be laying the TV. This will prevent it 
from being damaged.
CAUTION
• Attach the stand in the correct direction.
• Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
Optional accessory 
The listed optional accessories are available for this 
LCD colour TV. Please purchase them at your nearest 
shop.
•  Additional optional accessories may be available in the 
near future. When purchasing, please read the newest 
catalogue for compatibility and check the availability.
No. Part name Part number
1Wall mount bracket 
AN-37AG5
•  Stand unit (x1)
Soft cushion
 5
2 1
 
						

							Preparation
Inserting the batteries
Before using the TV for the first time, insert two supplied “AA” size zinc-carbon batteries. When the batteries become 
depleted and the remote control unit fails to operate, replace the batteries with new “AA” size batteries.
1 Hold in the tab on the battery cover and pull the cover towards the direction of the arrow.
2 Insert two supplied “AA” size batteries.
• Place batteries with their terminals corresponding to
 the (+) and (-) indications in the battery compartment.
3 Close the battery cover.
CAUTION
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
•  Do not mix batteries of different types. Different types of batteries have different characteristics.
•  Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause 
chemical leakage in old batteries.
•  Remove batteries as soon as they have worn out. Chemicals that leak from batteries can cause a rash. If you fi nd 
any chemical leakage, wipe thoroughly with a cloth.
•  The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
•  If you will not be using the remote control unit for an extended period of time, remove the batteries from it.
Note on disposing batteries:
The batteries provided contain no harmful materials such as cadmium, lead or mercury.
Regulations concerning used batteries stipulate that batteries may no longer be thrown out with the household 
rubbish. Deposit any used batteries free of charge into the designated collection containers set up at commercial 
businesses.
Using the remote control unit
Use the remote control unit by pointing it towards the remote control sensor. Objects between the remote control 
unit and sensor may prevent proper operation.
Cautions regarding the remote control unit
•  Do not expose the remote control unit to shock. In addition, do not expose the remote control unit to liquids, 
and do not place in an area with high humidity.
•  Do not install or place the remote control unit under direct sunlight. The heat 
may cause deformation of the unit.
•  The remote control unit may not work properly if the remote control sensor of 
the TV is under direct sunlight or strong lighting. In such cases, change the 
angle of the lighting or the TV, or operate the remote control unit closer to the 
remote control sensor.
 6
Remote control sensor°°
 
						

							Quick guide
123
Initial installation overview
Follow the steps below one by one when using the TV for the first time. Some steps may not be necessary 
depending on your TV installation and connection.
  Connect an antenna cable to 
the antenna terminal (Page 8).
  If necessary, insert a CA card 
into the CI slot to watch 
scrambled broadcasts
 (Page 8.)
  Connect the AC cord to the TV 
(Page 8).
Product shape varies in some countries.
  Turn on the power using a on 
the TV (Page 10).
  Run the initial auto installation 
(Page 9).
Language, country and 
tune type setting 
TV Location setting
  Congratulations!
Now you can watch TV.
  If necessary, adjust the 
antenna to attain maximum 
signal reception (Page 9).
 7
PreparationPower on and 
run the auto 
installationWatch TV
Connect 
external devices
  Connect external 
devices such as a 
DVD player/recorder 
as instructed (Pages 
14 and 15).
  Connect external 
audio devices such as 
speakers/amplifier as 
instructed (Pages 14 
and 15).
Start searching 
channels
HomeStore
 
						

							Quick guide
Before turning on the power
In order to receive coded digital stations, a Common 
Interface Module (CI Module) and a CA Card must be 
inserted in the CI slot of the TV.
The CI Module and the CA Card are not supplied 
accessories. They are usually available from your 
dealers.
Inserting the CA Card into the CI Module
  1With the side with the 
gold coloured contact 
chip facing the side of 
the CI Module marked 
with the provider’s 
logo, push the CA Card 
into the CI Module as far as it will go. Note the 
direction of the arrow printed on the CA Card.
Inserting the CI Module in the CI slot
  2Carefully insert the CI Module in the CI slot with 
the contact side forward. The 
logo on the CI Module must be 
facing outward from the rear of 
the TV. Do not use excessive 
force. Make sure the module is 
not bent in the process.
Checking CI Module information
  1Press MENU and the “PICTURE” menu is 
shown.
  2Press c/d to select “CHANNEL” menu.
•  The content of this menu depends on the provider of 
the CI Module.
  3Press a/b to select “CI information”, and then 
press OK.
●  ●  Module
General information on CI Module displays.
●  ●  Menu
Adjustment parameters of each CA Card displays.
●  ●  Enquiry
You can input numerical values such as passwords here.
NOTE
The content of each screen depends on the provider of 
the CI Module.
Inserting a CA Card
NOTE
•  Make sure that the CI module is properly inserted.
•  This menu is only available for digital stations.
•  It takes about 30 seconds to certify the license key when you insert a CA card into the CI+ compatible CI module for the 
first time. This process may fail when there is no antenna input or you have never run “Auto installation”. (CI+ only for Lx220  
series)
•  The CI+ compatible CI module sometimes upgrades its firmware. You may not receive any TV images before upgrading. You 
can only use the power button during upgrading.
•  The CI+ compatible CI module does not allow you to output any copy protected programmes using monitor out. 
•  If the TV displays an update confirmation message for the CA card while receiving CI+ compatible broadcasts, follow the 
screen prompts.
 8
1 Carefully insert the CI 
Module in the CI slot 
with the contact side 
forward.
2 The logo on the CI 
Module must be 
facing outward from 
the rear of the TV.
AC cordPlace the TV close to the 
AC outlet, and keep the 
power plug within reach.Standard 
DIN45325 plug 
(IEC 169-2) 75 q 
coaxial cable.
Product shape varies in some countries.