Sharp Lc 32dh57 Operation Manual

LC-32DH57E
LC-32DH57S
LCD COLOUR TELEVISION
LCD-FARBFERNSEHGERÄT
TÉLÉVISEUR COULEUR À ÉCRAN
CRISTAUX LIQUIDES (LCD)
TELEVISORE A COLORI LCD
LCD-KLEURENTELEVISIE
TELEVISIÓN EN COLOR LCD
TELEVISOR DE CRISTAL LÍQUIDO
OPERATION MANUAL
BEDIENUNGSANLEITUNG
MODE D’EMPLOI
MANUALE DI ISTRUZIONI
GEBRUIKSAANWIJZING
MANUAL DE MANEJO
MANUAL DE OPERAÇÃO
ENGLISH
SHARP ELECTRONICS (Europe) GmbH
Sonninstraße 3, D-20097 Hamburg
SHARP CORPORATION
Printed in Poland
Gedruckt in Polen
Imprimé en Pologne
Stampato in Polonia...

SPECIAL NOTE FOR USERS IN THE U.K.The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 13A 
fuse. Should the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked  or ASA 
and of the same rating as above, which is also indicated on the pin face of the plug, must be used.
Always refit the fuse cover after replacing the fuse. Never use the plug without the fuse cover fitted.
In the unlikely event of the socket outlet in your home not being compatible...

 1
OPERATION MANUALENGLISH
The illustrations and the OSD in this operation manual are for explanation purposes and may vary slightly from the actual operations.
The examples used throughout this manual are based on the LC-32DH57E model.
LC-32DH57E and LC-32DH57S models are compatible with H.264 (MPEG4 H.264, MPEG4 AVC, MPEG4 AVC/H.264) compressed 
broadcasts.
The marks (-BK, etc.) at the end of model name represent the colour of the TV cabinet.
Dear SHARP customer
Thank you for your purchase of the...

 2
Introduction
Important Safety Precautions
Cleaning—Unplug the AC cord from the AC outlet before cleaning the product. Use a damp cloth to clean the product. Do not use 
liquid cleaners or aerosol cleaners.
•
Water and moisture—Do not use the product near water, such as bathtub, washbasin, kitchen sink, laundry tub, swimming pool a\
nd 
in a wet basement.
•
Do not place vases or any other water-filled containers on this product. The water may spill onto the product 
causing fire or electric shock.
•...

 3
Introduction
Remote control unit
B (Standby/On)
(Page 10)
Numeric buttons 0 _9
Set the channel.
Enter desired numbers.
Set the page in teletext mode. When the five Nordic countries 
(Sweden, Norway, Finland, 
Denmark, or Iceland) are 
selected in the country setting 
from “Auto Installation” (Page 
20), DTV/ATV channels are 
four digits. When another 
country is selected, DTV/ATV 
channels are three digits.
A  (Flashback)
Press to return to the previously 
selected channel or external 
input.
f...

 4
Introduction
TV (Front view)
4
5
6
7
8
123
Remote control sensor
OPC sensor
B (Standby/On indicator)
a  (Power button)
@  (Menu button)
b  (Input source button)
:r/s  (Programme [channel] 
buttons)
i+/-  (Volume buttons)
1
2
3
4
5
6
7
8
TV (Rear view)
1
2
3
4
5
789
14151617 10
12
13 11
6
COMMON INTERFACE slot
SERVICE terminal (USB terminal 
for service personnel only)
HDMI 3 (HDMI) terminal
EXT 8 terminals
Headphones
AC INPUT terminal
EXT 4 (ANALOGUE RGB) 
terminal
HDMI 1 (HDMI) terminal
HDMI 2...

 5
Preparation
Supplied accessories
Remote control unit ( x 1) AC cord ( x 1) Stand unit ( x 1)
Product shape varies in some countries.
Pages 3 and 6 Page 8 Page 5
Operation manual (This publication)
“AA” size zinc-carbon battery ( x 2) ... Page 6
•
•
Optional accessory
The listed optional accessory is available for this LCD 
colour TV. Please purchase them at your nearest shop.
Additional optional accessories may be available in the near 
future. When purchasing, please read the newest catalogue for...

 6
Preparation
Inserting the batteries
Before using the TV for the first time, insert two supplied “AA” size z\
inc-carbon batteries. When the batteries become 
depleted and the remote control unit fails to operate, replace the batteries with new “AA” size batteries.
Open the battery cover.
Insert two supplied “AA” size batteries.
Place batteries with their terminals corresponding to the (e) 
and ( f) indications in the battery compartment.
Close the battery cover.
1
2
•
3
CAUTIONImproper use of...

 7
Quick guide
Initial installation overview
Follow the steps below one by one when using the TV for the first time. \
Some steps may not be necessary depending 
on your TV installation and connection.
Preparation
Connect an antenna cable to the 
antenna terminal (Page 8).
If necessary, insert a CA 
card into the CI slot to watch 
scrambled broadcasts (Page 15).
Connect the AC cord to the TV 
(Page 8).
Product shape varies in some countries.
n
o
p
Run the initial 
settings
Turn on the power using  a on...

 8
Quick guide
Before turning on the power


*
Standard DIN45325 plug (IEC 169-2) 75 q coaxial cable
AC cord (Product shape varies in some countries)
The AC cord is supplied either with a ferrite core or without a ferrite core. Neither 
type causes unnecessary electrical wave emissions or interference.
n
o
*
Place the TV close to the AC outlet, 
and keep the power plug within 
reach.
Supplying power to the antennaWhen an active antenna is used, power must be supplied to the antenna us\
ing the...