Sharp MX 3111U User Manual

DIGITAL FULL COLOUR MULTIFUNCTIONAL SYSTEM
Keep this manual close at hand for reference whenever needed.
MX-2010U/MX-2310U/MX-3111U
START GUIDE
START GUIDE
START GUIDE
Downloaded From ManualsPrinter.com Manuals       

2
Caution!
For complete electrical disconnection, pull out the main plug.
The socket-outlet shall be installed near the equipment and shall be eas\
ily accessible.
Shielded interface cables must be used with this equipment to maintain c\
ompliance with EMC regulations.
The equipment should be installed near an accessible socket outlet for e\
asy disconnection.
EMC (this machine and peripheral devices)
 „Warning:
This is a Class A product. In a domestic environment this product may cause radio...

3
For the users of the fax function
 „FAX interface cable and Line cable:
These special accessories must be used with the device.
The declaration of conformity may be consulted at: http://www.sharp.de/doc/MX-FX11.pdf
SOFTWARE LICENCE
The SOFTWARE LICENCE will appear when you install the software from the CD-ROM. By using all or any portion of the software on the CD-ROM or in the machine, you are agreeing to be 
bound by the terms of the SOFTWARE LICENCE.
MATERIAL SAFETY DATA SHEET
The MSDS (Material...

4
Contents
CAUTIONS  ——————————————————\
————————— 5
Symbols in this manual  ——————————————————\
—————— 5
Power notes  ——————————————————\
—————————— 5
Installation notes  ——————————————————\
———————— 6
About consumables  ——————————————————\
——————— 7
Handling precautions  ——————————————————\
——————— 7
SUPPLIES  ——————————————————\
——————————— 9
Emission of noise and chemicals  ——————————————————\
—— 10
Part Names  ——————————————————\
———————— 11
TURNING THE POWER ON AND OFF  —————————————— 12
OPERATION...

5
CAUTIONS
Symbols in this manual
To ensure safe use of the machine, this manual uses various safety symbols. The \
safety symbols are classified as explained below. Be sure you understand the 
meaning of the symbols when reading the manual.
 WARNING
Indicates a risk of death or serious injury.
 CAUTION
Indicates a risk of human injury or property damage.
When moving the machine, switch off the main power and remove the power plug from the outlet before moving.
The cord may be damaged, creating a risk...

6
Do not install the machine on an unstable or slanted surface. Install the machine on a surface that can withstand the weight of the machine.
Risk of injury due to the machine falling or toppling.If peripheral devices are to be installed, do not install on an uneven floor, slanted surface, or otherwise unstable surface. Danger of slippage, falling, and toppling. Install the\
 product on a flat, stable surface that can withstand the weight of the product.
Do not install in a location with moisture or...

7
Do not throw a toner cartridge into a fire.
Toner may fly and cause burns.
About consumables
 CAUTION
Store a toner cartridge out of the reach of children.
Do not place a container of water or other liquid, or a metal object that might fall inside, on the machine.
If the liquid spills or the object falls into the machine, fire or electrical shock may result.
Do not remove the machine casing.
High-voltage parts inside the machine may cause electrical shock.
Do not make any modifications to this...

8
Do not look directly at the light source.
Doing so may damage your eyes.
Do not block the ventilation ports on the machine. Do not install the machine in a location that will block the ventilation ports.
Blocking the ventilation ports will cause heat to build up in the machin\
e, creating a risk of fire.
 CAUTION
The fusing unit and paper exit area are hot. When removing a misfeed, do not touch the fusing unit and paper exit area. Take care not to burn yourself.
When loading paper, removing a misfeed,...

9
SUPPLIES
Standard supplies for this product that can replaced by the user include paper, 
toner cartridges, and staple cartridges for the finisher.
Be sure to use only SHARP-specified products for the toner cartridges, finisher 
staple cartridge, and transparency film.
The supply of spare parts for repair of the machine is guaranteed for at least 7 years following the te\
rmination of production. Spare parts are those parts of the machine 
which may break down within the scope of the ordinary use of...

10
Emission of noise and chemicals
Noise emission values
Emission density (measured according to RAL-UZ122: Edition Jun.2006)
Measured chemicalsCondition of copierColour modeDiffusion speed
Ozone
When copier is in operation
Colour3.0 mg/h or less
Black and white1.5 mg/h or less
DustColour4.0 mg/h or lessBlack and white
StyreneColour1.8 mg/h or less
Black and white1.0 mg/h or less
BenzeneColour0.05 mg/h underBlack and white
TVOC
Colour18 mg/h or less
Black and white10 mg/h or less
When on standby-2.0 mg/h...