Sharp Pg Mb56x Projector User Manual

Introduction Quick Start
SetupConnectionsBasic
OperationUseful
Features
Appendix
PROJECTEUR MULTIMÉDIA
MODELE
PG-MB66X/PG-MB56X
XG-MB50X-L
XR-11XC-L
XR-10X-L/XR-10S-L
MODE D’EMPLOI
MULTIMEDIA PROJECTOR
MODEL
PG-MB66X/PG-MB56X
XG-MB50X-L
XR-11XC-L
XR-10X-L/XR-10S-L
OPERATION MANUAL
IntroductionMise en route
rapideInstallation
Raccordements
Opération de
baseFonctions
pratiques
Appendice
XR-11XCL_cover06.9.12, 7:29 AM 1 

IMPORTANT
• For your assistance in reporting the loss
or theft of your Projector, please record
the Model and Serial Number located on
the bottom of the projector and retain this
information.
• Before recycling the packaging, please
ensure that you have checked the con-
tents of the carton thoroughly against the
list of “Supplied accessories” on page 10.Model No.:
Serial No.:
XR-11XCL_EN_a06.9.1, 11:30 AM 2 

1
IntroductionBefore using the projector, please read this operation manual carefully.
There are two important reasons for prompt warranty registration of your new SHARP
Projector, using the REGISTRATION CARD packed with the projector.
1. WARRANTY
This is to assure that you immediately receive the full benefit of the parts, service
and labor warranty applicable to your purchase.
2. CONSUMER PRODUCT SAFETY ACT
To ensure that you will promptly receive any safety notification of inspection,
modification, or...

2
INFORMATION
This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance
with the operation manual, may cause harmful interference to radio communications.
However, there is no guarantee that...

3
Introduction
37
Useful
Features
Using the Menu Screen
Menu Selections (Adjustments)
Example: Adjusting “Bright”.•This operation can also be performed by using the buttons on the projector.Press BMENU.•The “Picture” menu screen for the se-
lected input mode is displayed.
Adjustment buttons
(P/R/O/Q)
Example: “Picture” screen menu for INPUT 1
(RGB) mode
Press Q or O and select “Picture”
to adjust.
1
2
ENTER button
RETURN button
Menu item
Picture
Picture Mode
Contrast 0
0
0
0
K 7500SCR - ADJ PRJ - ADJ...

4
Contents
Preparing
Introduction
How to Read this Operation Manual .... 3
Contents ............................................... 4
IMPORTANT SAFEGUARDS ............... 6
Accessories ........................................ 10
Part Names and Functions ................. 11
Inserting the Batteries.......................... 14
Usable Range...................................... 15
Quick Start
Quick Star t .......................................... 16
Using
Basic Operation
Turning the Projector On/Off...

5
Introduction
Reference
Appendix
Maintenance ....................................... 47
Cleaning and Replacing the Dust
Filters ................................................ 48
Maintenance Indicators ...................... 50
Regarding the Lamp ........................... 52
Lamp..................................................... 52
Caution Concerning the Lamp............ 52
Replacing the Lamp............................. 52
Removing and Installing
the Lamp Unit.......................................

6
1. Read InstructionsAll the safety and operating instructions should
be read before the product is operated.
2. Retain InstructionsThe safety and operating instructions should be
retained for future reference.
3. Heed WarningsAll warnings on the product and in the operating
instructions should be adhered to.
4. Follow InstructionsAll operating and use instructions should be
followed.
5. CleaningUnplug this product from the wall outlet before
cleaning. Do not use liquid cleaners or aerosol
cleaners. Use...

7
Introduction
15. OverloadingDo not overload wall outlets, extension cords, or
integral convenience receptacles as this can
result in a risk of fire or electric shock.
16. Object and Liquid EntryNever push objects of any kind into this product
through openings as they may touch dangerous
voltage points or short-out parts that could result
in a fire or electric shock. Never spill liquid of any
kind on the product.
17. ServicingDo not attempt to service this product yourself as
opening or removing covers...

8Observe the following safeguards when setting up your
projector.
Caution concerning the lamp unit


Potential hazard of glass par-
ticles if lamp ruptures. In
case of lamp rupture, contact
your nearest Sharp Autho-
rized Projector Dealer or Ser-
vice Center for replacement.
See “Replacing the Lamp” on
page  52.
Caution concerning the setup of the pro-
jector

 For minimal servicing and to maintain high
image quality, SHARP recommends that this
projector be installed in an area free from
humidity, dust...