Sharp Pgf212xl Manual

37
Useful
Features
SEL ENTER END There is no picture or audio
Vertical stripes or flickering image appear
Data image is not centered
Color is faded or poor
Picture is dark
The image is distorted
Reset all adjustments to default settingsSEL.
Picture SCR - ADJ PRJ - ADJHelp
The items you can set with the “Help”
menu
“Help” menu n Page 48•Vertical stripes or flickering image appear
Auto Sync
Clock
Phase
•Data image is not centered
Auto Sync
H-Pos
V-Pos
•Color is faded or poor
COMPUTER/COMPONENT or DVI...

38
Menu Selections (Adjustments)
Example: Adjusting “Bright”.•This operation can also be performed by using the buttons on the projector.
Press MENU/HELP.•The “Picture” menu screen for the se-
lected input mode is displayed.
Example: “Picture” screen menu for
COMPUTER (RGB) input
Press Q or O and select “Picture”
to adjust.
1
2
Menu item
Picture Mode
Contrast 0
0
0
Bright
Standard
SEL./ADJ. ENTER END0
0 Red
BlueCLR Temp
BrilliantColorTM
C.M.S. Setting
C.M.S.
Lamp Setting0
1On
Bright DNROff
Reset...

39
Useful
Features
Press P or R and select “Bright”
to adjust.
•The selected item is highlighted.
•Press ENTER again to return to the pre-
vious screen.
Press O or Q to adjust the item
selected.
•The adjustment is stored.
Press MENU/HELP.•The menu screen will disappear.
3
4
5
0 Bright
Picture
SEL./ADJ. Rtn. Menu END
Picture Mode
Contrast 0
0Standard
SEL./ADJ. Single ADJ END0
0 Red
BlueCLR Temp
BrilliantColorTM
C.M.S. Setting
C.M.S.
Lamp Setting0
1On
Bright
Reset
15 Bright
PictureSCR - ADJ PRJ - ADJ Help...

40
Picture Adjustment (“Picture” Menu)
Standard
Presentation
Movie
Game
*sRGB
QPAGE1QPAGE2
Picture Mode
Contrast 0
0
0
0
BrightColorTint0 Sharp
Standard
SEL./ADJ. ENTER END0
0 Red
Blue
PictureSCR - ADJ PRJ - ADJ Help1
2
For standard image
Brightens portions of image for
more enhanced presentations.
Gives natural tint to the
projected image.
Gives sharpness to the
projected image.
For high fidelity reproduction of
images from a computer.
Picture Mode
CLR Temp
BrilliantColor
TM
C.M.S. Setting...

41
Useful
Features
2 22 2
2 Adjusting the Image
*1 Not displayed in the RGB input mode.
*2 Not adjustable/selectable when selecting “sRGB”.
*3 BrilliantColor™ uses Texas Instruments’
BrilliantColor™ technology. As the BrilliantColor™
level is increased, the image becomes brighter
while the color reproduction is kept at a high level.
Q button
For morecontrast.
For more
brightness.
For more color
intensity.
For making skin
tones greenish.
For more
sharpness.For stronger red.For stronger blue.For making...

42
5 55 5
5 Progressive
•In NTSC or PAL60Hz, even if the 3D Progres-
sive mode has been set, the three-two pull
down enhancement will be enabled automati-
cally when the film source has been entered.
•When the image is blurred or noisy, switch to
the optimal mode.
*The film source is a digital video recording with the
original encoded as is at 24 frames/second. The
projector can convert this film source to progres-
sive video at 60 frames/second with NTSC and
PAL60Hz or at 50 frames/second with PAL50Hz...

43
Useful
Features
Adjusting the Projected Image
(“SCR - ADJ” Menu)
SEL./ADJ. ENTER END Resize
Image Shift 0
0
Keystone
OSD Display
Background
Setup Guide
PRJ Mode
LanguageFront
English On Logo On Border PictureSCR - ADJPRJ - ADJ Help
876
4 3
21
5
1 11 1
1 Setting the Resize Mode
•For details of the Resize mode, see pages
30 and 31.
•You can also press RESIZE on the remote con-
trol to set the resize mode. (See page 30.)
Note
2 22 2
2Adjusting the Image
Position
You can move the projected image...

44
Menu operation n Page 38
Adjusting the Projected Image
(“SCR - ADJ” Menu) (Continued)
The projector can switch the on-screen display
language among 17 languages.
Selectable items
Front
Ceiling + Front
Rear
Ceiling + RearDescription
Normal image (Projected from
the front of the screen)
Inverted image (Projected
from the front of the screen
with an inverted projector)
Reversed image (Projected
from the rear of the screen or
with a mirror)
Reversed and inverted image
(Projected with a mirror)
8 88 8...

45
Useful
Features
SEL./ADJ. ENTER END Auto Power Off
System Sound
System Lock
hOn On
Auto Restart On
STANDBY Mode Standard
0min 0 Lamp Timer(Life) 100% Speaker On
Audio Input Audio 1
RS-232C 9600bps
Fan Mode Normal
Disable Auto Sync OnPicture SCR - ADJPRJ - ADJHelp
1
2
3
4
5
6
7
8
9
0
Menu operation n Page 38
•When the Auto Power Off function is set to
“On”, 5 minutes before the projector enters
standby mode, the message “Enter STANDBY
mode in X min.” will appear on the screen to
indicate the remaining...

46
Adjusting the Projector Function (“PRJ - ADJ” Menu)
(Continued)
Info
•If you lose or forget your keycode, contact
your nearest Sharp Authorized Projector
Dealer or Service Center (see page 66). Even
if the product warranty is valid, the keycode
reset will incur a charge.
0  0 0  0 
0 System Lock Function
This function prevents unauthorized use of the
projector. Once this function is activated, users
must enter the correct keycode each time the
projector is turned on. We suggest you record
the keycode...