Sharp Xr 30s Projector User Manual
Have a look at the manual Sharp Xr 30s Projector User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 615 Sharp manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
37 Useful Features Using the Menu Screen Menu Selections (Adjustments) Example: Adjusting “Bright”.• This operation can also be performed by using the buttons on the projector. Press MENU/HELP .•The “Picture” menu screen for the se- lected input mode is displayed. Example: “Picture” screen menu for COMPUTER (RGB) input Press Q or O and select “Picture” to adjust. 1 2 Menu item Picture Mode Contrast 0 0 0 0 0 BrightRedBlue 1CLR TempBright Boost Lamp Setting Standard Bright Reset SEL./ADJ. ENTER END Picture SCR - ADJ PRJ - ADJ Help Adjustment buttons ( P/R /O /Q ) MENU/HELP button ENTER button Adjustment buttons ( P /R /O /Q ) ENTER button RETURN button •P ress RETURN to return to the previous screen when the menu is displayed. MENU/HELP button
38 Using the Menu Screen (Continued) Press P or R and select “Bright” to adjust. • The selected item is highlighted. •P ress ENTER again to return to the pre- vious screen. Press O or Q to adjust the item selected. • The adjustment is stored. Press MENU/HELP .•The menu screen will disappear. 3 4 5 0 Bright Picture SEL./ADJ. Rtn. Menu END 15 Bright Picture Mode Contrast 0 0 0 0 RedBlue 1CLR TempBright Boost Lamp Setting Standard Bright Reset SEL./ADJ. Single ADJ END Picture SCR - ADJ PRJ - ADJ Help Note Contrast 0 0 0 0BrightRedBlueCLR TempBright Boost1 Picture Mode Lamp Setting Standard Bright Reset SEL./ADJ. Single ADJ END Picture SCR - ADJ PRJ - ADJ Help Resize Image Shift 0 0 KeystoneOSD Display On Border Picture SCR - ADJ PRJ - ADJ Help 0 Items to be adjusted • Menu buttons do not function while the projector is operating the “Auto Sync”, “Break Timer”, “FREEZE”, or “AV MUTE” functions. Note To adjust the projected image while watching it Press ENTER .•The selected item (e.g. “Bright”) is dis- played by itself at the bottom of the screen. • When pressing P or R, the following item (“Red” after “Bright”) will be displayed. The item displayed by itself Press ENTER .
39 Useful Features Picture Adjustment (“Picture” Menu) Standard Presentation Movie Game *sRGB Q Example: “Picture” screen menu for COMPUTER (RGB) input Q Example: “Picture” screen menu for S-VIDEO input Picture Mode Contrast 0 0 0 0 0 BrightRedBlue 1CLR TempBright Boost Lamp Setting Standard Bright Reset SEL./ADJ. ENTER END Picture SCR - ADJ PRJ - ADJ Help For standard image Brightens portions of image for more enhanced presentations. Gives natural tint to the projected image. Gives sharpness to the projected image. For high fidelity reproduction of images from a computer. Picture Mode Contrast 0 0 0 0 BrightColorTint0 0 Sharp 1CLR TempBright Boost Progressive 3D Progressive Standard Reset SEL./ADJ. ENTER END Picture SCR - ADJ PRJ - ADJ Help Lamp Setting Bright Menu operation n Page 37 •You can also press PICTURE MODE on the remote control to select the picture mode. (See page 33.)•*sRGB is an international standard of color reproduction regulated by the IEC (International Electrotechnical Commission). As the fixed color area has been decided by the IEC, the images are displayed in a natural tint based on an original image, when “sRGB”\ is selected. For additional information about the sRGB function, visit “http://www.srgb.com/”. You cannot set the items, “Red”, “Blue”, “CLR Temp”, “Bright Boost”, when “sRGB” is selected. Note 1 1 1 1 1 Selecting the Picture Mode •When “sRGB” is selected, the projected image may become dark, but this does not indicate a malfunction. Info •“sRGB” is displayed only when RGB signal is input. •Y ou can set or adjust each item in the “Picture” menu to your preference. Any changes you make are r etained in memory. 0 0 –1 0 – Bright Bright Eco + Quiet Bright Bright The default settings of each item when selecting Picture Mode 1 2 0 1– CLR Temp Selectable items Description Bright Boost Lamp Setting
40 4 4 4 4 4 Progressive •In NTSC or PAL60Hz, even if the 3D Progres- sive mode has been set, the three-two pull down enhancement will be enabled automati- cally when the film source has been entered. • When the image is blurred or noisy, switch to the optimal mode. • When using progressive inputs, inputs are di- rectly displayed so that 2D Progressive, 3D Progressive and Film Mode cannot be selected. * The film source is a digital video recording with the original encoded as is at 24 frames/second. The projector can convert this film source to progres- sive video at 60 frames/second with NTSC and PAL60Hz or at 50 frames/second with PAL50Hz and SECAM to play back a high-definition image. Selectable items 2D Progressive 3D Progressive Film Mode Description Useful to display fast-moving images such as sports. Useful to display relatively slow- moving images such as drama and documentary more clearly. Reproduces the image of film source* clearly. Displays the optimized image of film transformed with three-two pull down (NTSC and PAL60Hz) or two-two pull down (PAL50Hz and SECAM) enhance- ment to progressive mode images. Note 5 5 5 5 5 Lamp Setting •In the Eco + Quiet mode, the fan sound and power consumption are lower than those in the Bright mode. (Projection brightness de- creases as shown in the chart.) The lamp life will be approximately 3,000 hours (approxi- mately 2,000 hours in the Bright mode). Note Picture Adjustment (“Picture” Menu) (Continued) 2 2 2 2 2 Adjusting the Image *1Not adjustable/selectable when selecting “sRGB”. *2 Not displayed in the RGB input mode. *3 “Tone” will appear on the menu screen only when PAL or SECAM signals are input (including when forcibly changed to those input signals). There is basically no need to adjust “Tone”, but you can adjust the picture tone with this adjustment when inputting PAL or SECAM signals . Q button For more contrast. For more brightness. For stronger red. For stronger blue. For more color intensity. For making skin tones greenish. For more sharpness. For more vividness. Adjustment items Contrast Bright Red* 1 Blue*1 Color*2 Tint*2 *3 Sharp*2 Bright Boost*1 O button For less contrast. For less brightness. For weaker red. For weaker blue. For less color intensity. For making skin tones purplish. For less sharpness. For high fidelity color reproduc- tion. Note • “Bright Boost” and “CLR Temp” cannot be set when “sRGB” is selected. •T o reset all adjustment items, select “Reset” and press ENTER. 3 3 3 3 3 Adjusting the Color T emperature •V alues on “CLR Temp” are only for general standard purposes. Note Selectable items –2 –10 1 2 Description For lower color temperature for warmer, reddish incandescent-like images. For higher color temperature for cooler, bluish, fluorescent-like images. Menu operation n Page 37 P R Selectableitems Eco + Quiet Bright Brightness and Power consumption 100% Approx. 80%
41 Useful Features Adjusting the Projected Image (“SCR - ADJ” Menu) Resize Image Shift 0 0 KeystoneOSD Display Background Setup Guide PRJ Mode Language Front English On Logo On Border SEL./ADJ. ENTER END Picture SCR - ADJ PRJ - ADJ Help 87654321 1 1 1 1 1 Setting the Resize Mode •For details of the Resize mode, see pages 30 and 31. •Y ou can also press RESIZE on the remote con- trol to set the resize mode. (See page 30.) Note 2 2 2 2 2 Adjusting the Image P osition You can move the projected image vertically. Q button •Y ou cannot set this item when “Resize” is set to “Normal”. Note O button Menu operation n Page 37 3 3 3 3 3 Keystone Correction When the image is projected either from the top or from the bottom towards the screen at an angle, the image becomes distorted trapezoidally. The function for correcting trap- ezoidal distortion is called Keystone Correction. Select “Keystone” on the “SCR-ADJ” menu and adjust with the slide bar. See page 28 for details of Keystone Correction. O button Q button •The Keystone Correction can be adjusted up to an angle of approximately ±20 degrees (when “Resize” is set to “Normal”). Note
42 The projector can switch the on-screen display language among 15 languages. Selectable items Front Ceiling + Front Rear Ceiling + Rear Description Normal image (Projected from the front of the screen) Inverted image (Projected from the front of the screen with an inverted projector) Reversed image (Projected from the rear of the screen or with a mirror) Reversed and inverted image (Projected with a mirror) 6 6 6 6 6 Selecting the Setup Guide 8 8 8 8 8Selecting the On-screen Display Language Selectable items On Off Description Displaying the Setup Guide when turning the projector on. Not displaying the Setup Guide. 7 7 7 7 7 Reversing/Inverting Projected Images English Deutsch Español Nederlands Français Italiano Svenska Português polski Türkçe Adjusting the Projected Image (“SCR - ADJ” Menu) (Continued) 4 4 4 4 4 Setting the On-screen Display Menu operation n Page 37 Selectable items On Off Description All on-screen displays are displayed. INPUT/VOLUME/AV MUTE/FREEZE/ AUTO SYNC/RESIZE/PICTURE MODE/ “An invalid button has been pressed.” are not displayed. 5 5 5 5 5Selecting the Background Image Selectable items Logo Blue None Description Sharp logo screen Blue screen — See page 19 for details of Projection (PRJ) Mode.
43 Useful Features Adjusting the Projector Function (“PRJ - ADJ” Menu) Auto Power Off System Sound System Lock hOn On Auto Restart On STANDBY Mode Standard 0min 0 Lamp Timer(Life) 100% Picture SCR - ADJ PRJ - ADJHelp SEL./ADJ. ENTER END Speaker On Audio Input Audio 1RS-232C 9600 bpsFan Mode NormalDisable Menu operation n Page 37 •When the Auto Power Off function is set to “On”, 5 minutes before the projector enters standby mode, the message “Enter STANDBY mode in X min.” will appear on the screen to indicate the remaining minutes. Selectable items On Off Description When no input signal is detected for more than 15 minutes, the projector will automatically enter standby mode. The Auto Power Off function will be disabled. Note 1 1 1 1 1Auto Power Off Function 5 5 5 5 5 Speaker Setting 4 4 4 4 4Setting the Confirmation Sound (System Sound) Selectable items On Off Description A confirmation sound is made when the projector turns on/off. No confirmation sound is made. When set to “Eco”, power consumption is reduced in standby mode. 3 3 3 3 3 STANDBY Mode Selectable items On Off Description The audio signal is output from the internal speaker. The audio signal is not output from the internal speaker. 6 6 6 6 6 Monitor Output This function allows you to select an appropriate combination of audio input terminals for each input mode. 6 6 6 6 6 Audio Input Selectable items Audio 1 Audio 2 Description The AUDIO 1 input terminal is used as an audio input terminal. The AUDIO 2 input terminal is used as an audio input terminal. Selectable items Eco Standard Description The monitor output and RS-232C functions are switched off in standby mode. The monitor output and RS-232C functions are activated even if the projector is in standby mode. 2 2 2 2 2 Auto Restart Function Selectable items On Off Description If the power cord is unplugged from the outlet or the breaker switch is turned off when the projector is on, then the projector automatically turns on when the power cord is plugged into the AC outlet or the breaker switch is turned on. The projector does not turn on automatically when the power cord is plugged into the AC outlet or the breaker switch is turned on.
44 Info This function prevents unauthorized use of the projector. Once this function is activated, users must enter the correct keycode each time the projector is turned on. We suggest you record the keycode in a safe place where only au- thorized users have access. •If you lose or forget your keycode, contact your nearest Sharp Authorized Projector Dealer or Service Center (see page 63). Even if the product warranty is valid, the keycode r eset will incur a charge. Press the 4 buttons on the remote control or on the projector to en- ter the preset keycode in “Old Code”. • When setting the keycode for the first time, press R on the projector for four times. Setting the System Lock PRJ - ADJ Old Code New Code Reconfirm –––– –––– –––– 3 • If you input a wrong keycode, the cursor returns to the first point of the “Old Code”. • The preset keycode is 4 R buttons on the projector. When you press the R but- ton four times, the keycord input screen disappears. Note 9 9 9 9 9 System Lock Function Adjusting the Projector Function (“PRJ - ADJ” Menu) (Continued) 8 8 8 8 8 Fan Mode Setting Menu operation n Page 37 This function changes the fan rotation speed. Selectable items Normal High Description Suitable for normal environments. Select this when using the projector at altitudes of approximately 1,500 meters (4,900 feet) or more. 7 7 7 7 7Selecting the Transmission Speed (RS-232C) Make sure that both the projector and computer are set for the same baud rate. Selectable items 9600bps 115200bps Description T ransmission speed is slow. T ransmission speed is rapid. P R 0 0 0 0 0 Checking the Lamp Life Status Y ou can confirm the cumulative lamp usage time and the remaining lamp life (percentage). • It is recommended that the lamp be changed when the remaining lamp life becomes 5%. • The lamp life may vary depending on the us- age condition. Lamp usage condition Operated exclusively with Lamp Setting set to “Eco +Quiet” Operated exclusively with Lamp Setting set to “Bright” 100% Approx. 3,000 hours Approx. 2,000 hours 5% Approx. 150 hours Approx. 100 hours Remaining lamp life Note “Life” a Setting/Changing the keycode When “Fan Mode” is set to “High”, the fan rotation speeds up, and the fan noise becomes louder. Select “System Lock”, then press ENTER or Q.1 Select “Next”, then press ENTER.•The screen for entering the keycode appears.2
45 Useful Features Note Input screen for keycode To cancel the keycode that you have already set •P ress R on the projector for four times in steps 3 and 4 above. When the System Lock is set• When System Lock is set, the keycode input screen appears after the power is turned on. When it appears, enter the right keycode to start projection. Enter the same keycode in “Re- confirm”. •Y ou cannot use the following buttons for keycode: • STANDBY/ON• ON • STANDBY• ENTER • L-CLICK • R-CLICK/RETURN • MENU/HELP • System lock function recognizes each button on the remote control or on the projector as an individual button, even if they share the same button name. If y ou used the buttons on the projector in setting your keycode, the keycode cannot be canceled with the remote control. Press the 4 buttons on the remote control or on the projector to en- ter the new keycode in “New Code”. Setting the System Lock PRJ - ADJ Old Code New Code Reconfirm ****– ––– –––– System Lock –––– 4 5 Note Locking the Operation Buttons on the Projector Use this function to lock the operation buttons on the projector. a T aking the Keylock offHold down ENTER on the projector for about 5 seconds. On-screen display a Locking the Operation ButtonsHold down ENTER on the projector for about 5 seconds while the projector is being turned on. On-screen display • The keylock function does not affect the opera- tion with the remote control buttons. •Y ou cannot use the keylock function while the projector is warming up. • When the projector is in standby mode, you can release the keylock by holding down ENTER and STANDBY/ON on the projector simulta- neously for about 5 seconds. • Keylock does not function while the projector is: displaying the “Setup Guide” or “Menu” screens, in standby mode, warming up, changing input signals, operating “Auto Sync” function, in “FREEZE” mode or on the “Sys- tem Lock” screen during warming up. Info Ke ylock Function
46 Troubleshooting with the “Help” Menu Utilizing the “Help” Menu Functions This function advises you to solve the problems during usage. •Y ou can adjust the items with check marks ( ✔). • The items in the “Help” menu change, de- pending on the input signal or setting that you have selected. • If the problem is not solved, refer to “Troubleshooting”. (see pages 61 and 62) • When selecting “sRGB” in Picture Mode”, the item “Color is faded or poor” is not displayed. This means you cannot change input signal types. Press O or Q to adjust. If the image is not improved, se- lect “Adjust horizontal noise”, then press ENTER. Select “Initiate “Auto Sync” Ad- justments”, then press ENTER. Press P or R to select “Vertical stripes or flickering image ap- pears” on Help menu, then press ENTER . Example: When image flickering appears Operation to solve image flickering when pro- jecting the computer RGB signal. 3 4 5 6 Note Press MENU/HELP .1 2 Press O or Q to select “Help”, then press ENTER . Adjustment buttons (P /R /O /Q ) ENTER button MENU/HELP button 0 PhaseSEL./ADJ. Rtn. Menu END HelpThere is no picture or audio Vertical stripes or flickering image appear Data image is not centered Color is faded or poor Picture is dark The image is distorted Reset all adjustments to default settings If there is no change after performing Auto Sync adjustments, adjust the following items. Initiate “Auto Sync” Adjustments. Vertical stripes or flickering image appear Vertical stripes or flickering image appear Adjust vertical noise Adjust horizontal noise Reset the 2 items above Return Signal Info 1024 768 H 48.3 kHz / V 59.9 Hz Picture SCR - ADJ PRJ - ADJ Help Help SEL. ENTER END SEL. ENTER END Press ENTER .