Siemens 1000c Hicom Cordless E Operating Insctructions Manual

21
Telephone functions
Internal dialling
oDial an internal number
Also see 
Note:
gPress the line key.
CallConduct the call – the number and the name of the user
are displayed.
You can now scroll through the functions offered with
the 
> display key and if necessary, execute a function.
Ending a call:
gPress the line key or place the mobile unit in the
charging shell.
Note:
lYou can cancel the dialling operation by pressing DIAL AGAIN.
lThe dialled number is automatically stored for number redial, see...

22
Telephone functions
External dialling
External code
e.g. 0Enter the External code, e.g. 0
oDial the external number – the digits entered are
zoomed at the beginning.
Also see 
Note:
gPress the line key.
CallConduct the call.
You can now scroll through the functions offered with
the 
> display key and if necessary, execute a function.
Ending a call:
gPress the line key or place the mobile unit in the
charging shell – the call charges are displayed depending
on the system settings.
Note:
lYou can cancel...

23
Telephone functions
Answering calls
The mobile unit’s ringing tone is audible. Depending on the user (internal/
external), the number and the name of the caller is displayed.
lThe mobile unit is in the charging shell:
Simply remove the mobile unit from the charging shell.
or
lThe mobile unit is not in the charging shell:
gPress the line key.
CallConduct the call.
You can now scroll through the functions offered with
the  display key and if necessary, execute a function.
Ending a call:
gPress the line...

24
Telephone functions
Call Pickup
The Call Pickup feature allows you to answer any ringing extension in your
pickup group from your telephone.
Activate Call Pickup
An extension within your pickup group is ringing
a ping ring will alert you to an incoming call
Display shows Source of call and Destination of
call
oDial 
* ** *
* 33
gPress the line key.
You have now answered the call 

25
Telephone functions
Second Call Waiting
This feature allows a second call to camp on your extension when you are busy
on a call.
The caller will receive ringing tone instead of busy tone.
Activate Second Call Waiting
üpress the INT Key
>Scroll to SW ITCHES.
SW ITCHESPress the display key.
S ECOND CA LLPress the display key.
Display shows Camp-on is off
A C TIV A TEPress the display key.
Display shows Second call activated
Deactivate Second Call Waiting
üpress the INT Key
>Scroll to SW ITCHES.
SW...

26
Telephone functions
Timed Reminder
Timed reminders or alarms can be programmed to remind you of meetings or
appointments.
Set Timed Reminder (e.g. 3:30 PM)
üpress the INT Key
>Scroll to RE M INDE R
RE M INDE RPress the display key.
Display shows Nothing Stored
RE M INDE RPress the display key.
oenter 1530
SAVEPress the display key to save the time – Reminder
Stored is displayed briefly.
Display Timed Reminder
üpress the INT Key
>Scroll to RE M INDE R
RE M INDE RPress the display key.
Display shows...

27
Telephone functions
Number redial - last 3 numbers
You have dialled a number, but the other party is busy or does not answer:
press the line key. The last 3 numbers dialled (up to 22 digits) are always
automatically stored.
Number redial:
lWith block dialling
RE DIA LPress the display key – the 3 stored numbers are
displayed.
If necessary, press 
NE XT to scroll to the required
number.
gPress the line key – the marked number is dialled.
lVia function overview
ßPress the function key – the function...

28
Telephone functions
System Abbreviated Dialling
The system allows for the storage of 16000 external telephone numbers
divided into 16 groups, each containing 1000 numbers. You can have access
to only two groups i.e. 2000 numbers.
By utilising the System Abbreviated Dialling, you will be permitted to dial
specific numbers that would be outside your normal trunk barring limits.
Use the System Abbreviated Dialling
Select the relevant access code from the Abbreviated
Dialling Directory.
oDial the relevant...

29
Telephone functions
Night service
oDial 
* ** *
* 88
gPress the line key.
You are now connected to the caller
Check with System Administrator if any other type of Night Service is
operational. 

30
Switching functions
Automatic callback
If a dialled internal user is busy or if your call is not answered, you can program
an automatic callback request:
CA LLB A CKPress the display key – Will call back appears
briefly.
Note:
lThe system calls you back
- when the user becomes free or
- when the user makes another call or
- executes the callback request stored in the mailbox.
lThe callback is deleted if you do not answer the callback within 4 rings.
lThe number of callback requests that can be stored...