Siemens Fi 24dp00 Operating Instructions

Operating instructionsen
FI18NP.. FI24DP..
  

2
Contents 
Congratulations  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Safety and warning information  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  . . . . . . . . . . . . . . . . . . . . . . . . 3
Information concerning disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  ....

3
Congratulations 
In buying your new freezer, you have  
chosen a modern and qualitatively, 
high-grade appliance. 
Your freezer is characterised by efficient  
saving of energy. 
Each appliance which leaves our factory  
is inspected thoroughly to ensure that 
it functions properly and is in perfect 
condition. 
If you have any questions –
 particularly 
concerning installation and connection  
of the appliance  – please do not 
hesitate to contact our customer 
service, see section “Customer service”,...

4
– Do not scrape off hoarfrost or stuck 
frozen food with a knife or pointed  
object. You could damage the 
refrigerant tubing. Leaking refrige-
rant may ignite or cause eye  
injuries.
– Only customer service may change  the power cord and carry out any  
other repairs. Improper installations 
and repairs may put the user at 
considerable risk.
Children in the household 
– Do not allow children to play with  the appliance!
– If the appliance features a lock,  keep the key out of the reach of...

5
Your new appliance 
These operating instructions refer to several models. Illustrations can differ. 
1. Fascia 
2. Ice maker 
3. Ice cube container
4. Shelves 5. Drawer 
6. Particle filter / Water filter * 
7. Door storage compartment
8. Ice and water dispenser 9. Control panel for the ice and water 
dispenser
10. Water capture bowl and rest  (detachable)
* Accesories
  

6
Fascia 
A On/Off button  
Serves to switch the appliance on and  
off. 
BIce maker button  
Serves to switch the ice maker on and  
off. 
See section “Ice maker” (page 13). 
C Alarm button  
Switches the alarm off. 
See section “Door alarm” (page 8). 
D “Super” freeze button  
Serves to switch the “super” freezing  
function on and off. 
See section “Super” freezing (page 8). 
E Display panel 
The refrigerated drawer temperature  
is displayed on the fascia. Activated 
special functions are shown by...

7
Installation 
Installation location 
Install the appliance in a dry, well  
ventilated room. The installation location 
should neither be exposed to direct  
sunlight nor near a heat source, e.g.  
a cooker, radiator, etc. If installation 
next to a heat source is unavoidable, 
use a suitable insulating plate or observe 
the following minimum distances to  
a heat source: 
– 3 cm to an electric cooker.
– 30 cm to an oil or solid-fuel cooker.
The floor on which the appliance is to  
be installed must be...

8
Factory settings 
Upon leaving the factory, the appliance  
has been supplied with the following 
settings: 
– Fascia language: English
– Temperature unit:  °C
– The freezer compartment  temperature: –
18 °C
Note
The factory settings (language, tempe- 
rature unit) can be changed in the setup 
mode.
Switching on  
the appliance  Press the on/off button  .
The appliance starts to cool down when  
switched on for the first time. When the 
door is opened, the interior light comes  
on. Note 
The preset...

9
Variable interior  design 
You can vary the shelves inside the  
appliance and the containers in the 
door to suit your requirements. 
Shelves 
The height of the glass shelves can be  
adapted. Lift the compartment front and  
move it upwards or downwards 
into the guiding positions.
 Lower the compartment front to the 
desired height. The holders engage 
into the guiding positions.
Removing the compartments: 
Lift the compartment front and move it  
into the guiding positions as far as the  
openings....

10
Setup mode 
There are menus for adapting the  
appliance to the individual user require-
ments. These adaptions are carried out  
in the setup mode. 
To activate the setup mode: Press setup button  .
The first menu (temperature unit)  
is displayed in the fascia. To switch to the next menu:
 Press the selection button   or  
. 
The next menu is displayed and its  
current setting (mostly or
 ).
To make a selection within the setting 
options of a menu:
 Press the setting button  + or  –.
A changed...