Siemens Se 60 T 392 Eu Quick Guide

							Auto Wash
 ±
+
< >
Quick  Guide  Dishwasher
Short and precise:
everything your dishwasher needs... However , before using the
device for the first time, read the Installation and InstructionManual thoroughly!
Start  programme  Here goes ...
Switch  off the device  All done ...
Open  the door when the buzzer has sounded 5 times
(programme stop). ªReadyº is briefly displayed, the appliance automatically switches of f after 5 seconds.
Fill in rinse aid
Fill in cleaning product
Select programme  In the Main Menu by pressing ±/+Fill
 in salt
Open mains water tap  Switch on the device
Switch  on by pressing main switch   (approx. 2 seconds)
Press Start button.
9000  154 623         en
Menu Start
OK
Interesting  Facts For The OperationBefore first use
±   Main switch :Switch on the device
±  Menu/OK : Select options, store changed value
±  and + :Select programmes and settings
±  Start : Start programme.
± 
Select the display language (see instruction manual)
±  Fill in salt and rinse aid (see below)
±  Set Softening System (see instruction manual) The display gives optical character information on the programmes, options, and settings as well as actions available.
Auto W
ash
 Menu
± +
< >
OK
The luminous arrows indicate whether you are able to select among other options using ± or +.
This dishwasher is equipped with touch buttons. A
 gentle touch starts the function. A signal will sound on
setting the buttons. Start
Not required if softening system set to ª0º. Required if ªRefill saltº is displayed
Unscrew 
the lid.
Only before using the dishwasher for the first time pour approx. 1 l / 2 pt water
 into the
salt opening.
Pour in max. 1.5 kg / 3 lb 5 oz
salt  (never deter -
gent!)
Screw on the lid. Switch on dishwasher 
immediately.
Required if ªRefill rinse aidº is displayed.
Press the marking, Lift the  lid
Pour in  
the rinsing agent
Close the  lid. CLICK
Little dirt, little cleaning agent
Warning, combination  products are not suitable for allprogrammes,  follow manufac- 
turer s instructions.
Pour in the  cleaning agent
Push the lid  too, press. PLOP
Fast, Eco or Power ...The programme data are laboratory read-outs according to European Standard EN 50242. In practice, deviations are possible.
Programme Overview
Duration: hs/mins Energy Consumption: kWhW
ater Consumption: litres Auto Super
Wash
Auto W
ash
Prerinse
Only Auto
Delicate Wash
Quick
Wash
1:50-2:201,40-1,7012-20
1:25-2:201,00-1,60
9-19
1:20-1:400,70-0,90
10-18
0:300,70
10
0:190,05
4
Options/Basic  Settings (Menu)
Standard Programmes
Select and store: Menu/OK; Set: ±/+.
1. T imer programming
2. Reduce T ime
3. Onboard computer  *
4. Drying Level 5. Buzzer V olume 6. Adding Rinse Aid 7. W
ater Hardness
8. Language9. Standard Programmes
*   not  included with all models
Duration: hs/mins Energy Consumption: kWhWater consumption in litres
2:20 1,05
15
Extra Eco
50Eco
45 Normal
45
2:201,05 12 2:201,05
10 2:150,61 13,6
                  
						

							Maintenance and care
For perfect rinsing results ...
Cleaning the waste-water pump *
Strainers  ...
Check, if required, clean
Rotate filter cylinder , remove
filter system ...
rinse under flowing water ...
Insert ...
Screw in filter system NOTE MARK!
* With some models ± Ladle out water and remove filters
± Unscrew cover (T orx T20)
± Check  area of fan impeller  for foreign objects
± Screw  in cover and insert filters
Spray arms ... Remove blockages/deposits
Pull lower arm upwards ...
Unscrew upper arm ...
Clean spray nozzles under flowing water (perhaps with toothpick) ...
Insert lower arm ...
Screw in upper arm
Eliminating  minor faults yourself ...
... Self-help pays!
Display  in wrong language Language changed
Switch off and on the device. Press the
button M/OK repeatedly until the display shows the language selection. Select the language using ±/+, and store the selection using M/OK.
Fault Possible Cause
Device does not work/stops Supply fitting not open Supply hose kinked Supply fitting jammed or calcified Open supply fitting. Lay supply hose without kinks. 1. Unscrew water connection. 2. Clean filter in the water connection. 3. Flow rate must be min. 9 l/min when the water inlet is open.If the flow rate is less, replace the supply fitting.
RemedyPlastic parts / parts of dishes discoloured
T
oo little cleaning product
Discoloration caused by food colourings(tomato sauce) Follow manufacturer
s specifications
(detergent). Discoloration is quite safe; fades after subsequent rinse cycles.Residual water in the device Programme does not start, does not run on W
aste-water pump blocked
Programme has not been started Door was opened before end of programme Clean waste-water pump (see above) If necessary
, start programmes.
Close the door . Wait for programme stop
(buzzer sounding 5 times).
Fault Possible Cause Remedy
Stains and streaks Milky residues on dishes (can be removed) Cutlery rusty Rinse aid dosage too high / too low Glasses not dishwasher-proof. Cutlery not rust-proof Hard knife blades are more susceptible Extraneous rust Streaks: Reduce dosage. W
ater or limescale stains:
Increase dosage.
Use dishwasher-proof glasses.  Use glass-friendly cleaning products. Use dishwasher-proof cutlery .
Never wash rusting parts in the appliance.
Further advice can be found in the instruction manualMilky film, glasses cloudy / dull (cannot be removed) W
ater softening system incorrectly set;
no special salt Set water softening system correctly
.
Refill with special salt.
Dishes not clean Sand or grainy residues 
on dishes
Utensils are situated too close to each other or on top of each other T
oo little cleaning product
Unsuitable programme selected Spray nozzles blockedFilters dirty , not installed securely
Spray arms blocked Spread out the utensils, avoid contact between the utensils. Follow manufacturer
s specifications
(detergent).Select more intensive programme. Clean spray arms (see above).Clean the strainers (see above). Arrange the utensils so that the spray arms can rotate freely .
Interrupting  the programme ... Terminating the programme ...
Arranging utensils correctly ...
± Open  the door .
±  To  continue the programme, close the door .±
 Open  the door and press the (±) ªT erminate programmeº button.
±  Close  the door .
±  Open  the door when the buzzer has sounded 5 times (programme
stop). ªReadyº is briefly displayed, the appliance automatically switches of f after 5 seconds.
Arrange dishwasher-proof utensils (having removed any ash, wax, grease or ink. Coarsely remove sticky labels, large remnants of jam, milk products or food) according to the operating instructions and check that the spray arms can rotate freely .