Siemens Sn 66t090 Instructions For Use

en11
Adjusting
 the height of the
basket The  height of the upper utensils basket
can be adjusted in 3 stages to create more space either in the upper or lower basket. Appliance height 81.5 cm
Top
basketBottom basket
Setting 1 max.  j16 cm30 cm
Setting 2 max. j18.5 cm27.5 cm
Setting 3 max. j21 cm25 cm
Appliance height 86.5 cm
Top
basketBottom basket
Setting 1 max.  j18 cm33 cm
Setting 2 max. j20.5 cm30.5 cm
Setting 3 max. j23 cm28 cm
Pull out the top basket 22.
To  lower  the basket, press in the left...

en
12 Detergent
Y ou can use tablets as well as powder
or liquid detergents for dishwashers, but never use washing up liquid. T ablets
contain not only detergent but alsorinse-aid and salt (3in1) and, depending on the combination (4in1, 5in1, etc.), additional components such as glassprotection or stainless steel cleaner .
If tablets contain rinse-aid and salt, it isusually not necessary to add additional rinse-aid and salt up to a specific degree of hardness. If the degree of hardness is higher and if...

en13
Warnings
Do  not  place small parts for washing
in the tablet collecting tray 
24 ; this
prevents the tablet from dissolving 
evenly.
If you want to add more utensils after the programme has started, do  not
use the tablet collecting tray 
24
as a handle for the upper basket. The tablet could already be there and you will touch the partially dissolvedtablet.
Note
Y ou will obtain optimum rinsing and
drying results by using solo detergents and applying salt and rinse-aid 
separately.  
f programmes...

en
14 Overview
 of programmes
The  max. possible number of programmes is illustrated in this overview . The corresponding
programmes for your appliance can be found on the fascia.
Programme
T ype of utensils
and soilingProgramme sequencePossible additional options
Auto 65 ±75 Pots, utensils and cutlery Highly soiledIs optimised according to the soiling with the aid of sensors.all
Auto 45 ±65 Utensils and cutlery Normally soiledIs optimised according to the soiling with the aid of sensors.all
Eco 50...

en15
Additional
 options
* depending  on model
Additional options 
9 can be set with the
buttons.
Saving  time (V arioSpeed) *
The  >>Save time

en
16
Optical
 display while the
programme is running *
* depending  on model
While the programme is running, a light spot shines on the floor under the appliance door . Do not open the
dishwasher door until the light pointis no longer visible on the floor .
If the appliance is installed at eye-level,with flush furniture front, the light pointis not visible. This function can be changed as follows:
Open the door .
Switch on ON/OFF switch 1.
Hold down programme button A
and press ST ART button 
10 until...

en17
T
o change the setting,
press programme button C .
Each time the button is pressed, the set value increases by one level; when the value of 
 has been reached, the
display jumps back to 
 (of f).
Press ST ART button 10, the set value
is saved.
Close the door .
Switching  off the appliance
Short  time after the end of the programme:
Open the door .
Switch off ON/OFF switch 1.
Turn of f the tap (not applicable
if  Aqua-Stop fitted).
Remove the utensils when they have cooled down.
Warning
At the end of...

en
18
Interior
 light*
20
The  interior light comes on when the door
is opened irrespective of whether the ON/OFF switch 
1 is switched on or of f.
When the door is closed or ajar , the light
is of f.
Open the door .
Switch on ON/OFF switch 1.
Hold down programme button A and
press ST ART button 
10 until 
is indicated on the digital display .
Release both buttons. The LED for button 
A flashes and
the digital display displays the factory setting 
.
Press programme button A  until
the factory set value...

en19
Filters The filters 
27
 keep large foreign objects
in the rinsing water away from the pump. These foreign objects may occasionally block the filters. The filter system consists of a coarse filter ,
a flat fine filter and a microfilter .
After each washing cycle check the filters for residue.
Unscrew filter cylinder as illustrated and take out filter system.
Remove any residue and clean filters under running water.
Re-install filter system in reverse sequence and ensure that the arrow marks are...

en
20
Waste
 water pump
Large  food remnants in the rinsing water
not retained by the filters may block the waste water pump. The rinsing water is then not pumped out and covers the filter .
In this case:
First disconnect the appliance from the power supply .
Remove the filters 27.
Scoop out water , use a sponge
if required.
Using a spoon, prise of f pump cover
(as illustrated) until it clicks, then grip the cover by the lug and first pull it upwards until it resists and then pull it out forwards.
Check...