Sim2 Multimedia Projector Ht500 Link User Manual

User and Installation ManualThe home theater projector
HT500 LINK
  cod.46.0376.100    

LIGHT
F1
ZOOM
FOCUS
F2
Activates test patterns MENU -
Activates  the On Screen Display menus.
Navigates menu pages.
FREEZE
Freezes a moving picture. STAND-BY
Switches off to stand-by.
0-9 Keys
Switch  on  from  stand-by
and  allow  direct  source
selection.
ESCAPE
Deactivates th e On  Screen Display.
MENU +
Activates  the On Screen Display menus.
Navigates menu pages.
MEMORIES
Activates  Memories menu
INFO
Displays the selected  source information 
and the  projector status.
VCR
Improves the video...

1

1  INTRODUCTION
Congratulations on your choice of the SIM2 Grand Cinema HT500LINK system!
DIGIOPTIC ™ IMAGE PROCESSOROFFON123-CLASS 1 LASER PRODUCT
500 LINK 

2

Thanks to the new optical system based on three chip DMD™, 
the HT 500 LINK allows to take advantage from DLP™ techno
-
logy, the Texas Instruments technology.
Each of the three DMD™ chip is dedicated to the modulation of 
one of the primary colors coming from the optical prism, the refl 
ected light, after combination by a second prism, is projected 
outside using an appropriate lens system.
The  technology  of  the  HT  500  LINK  allows  to  obtain  images 
without rainbow effect or any other type...

3

Prior to switching on the projector please read each chapter of 
this manual carefully as this manual provides basic instructions 
for using the projector.
The  installation  of  the  lamp  assembly,  preliminary  adjustments 
and  procedures  that  necessitate  the  removal  of  the  top  cover, 
must be carried out by authorised, trained technicians. There are 
no  user  serviceable  parts  inside.  To  ensure  safe  and  long  term 
reliability  please  use  power  cables  supplied  with  the...

4

1  Projection lens
2  Cooling air inlet vents
3  Remote control IR sensor
4  Adjustable levelling feet
5  Cooling air outlet vents
6  Rear keyboard pad7  Remote control rear IR sensor
8  Fiber Optic cable connections
9  Fused power socket
10  Main power switch
11  Ceiling bracket fixing holes
DIGIOPTIC “ IMA
GE PROCESSOR
OFFON
DC IN1
2V OUTV IDEOS
-V
IDEO
COM PONENT / RG
B S
R/Cr
V
G/YB/CbH/HVR
/ Cr
V
G/YB/CbH/HVR/Cr
VG/Y
B/CbH/HVR/Cr
VG/YB/ CbH
/HVGRAPH ICS RGB
1234
56
78CLASS 1 L
ASER PRODUCT910...

5

•   Read this manual carefully and keep it in a safe place for future consultation.
  This  manual  contains  important  information  on  how  to  install and use this equipment correctly. Before using the 
equipment, read the safety prescriptions and instructions 
carefully. Keep the manual for future consultation.
•   Do not touch internal parts of the units.
  The  units  contain  electrical  parts  carrying  high  voltages  and  operating  at  high  temperatures.  Do  not  remove  the 
cover...

6

of electrical storms or when the system will remain unused 
for prolonged periods. 
•   Avoid contact with liquids and exposure to hu
-
midity. 
  Do not use the units near water (sinks, tanks, etc.); do not  place objects containing liquids on top of or near the units 
and do not expose them to rain, humidity, dripping water 
or spray; do not use water or liquid detergents to clean the 
units.
•  Prevent the units from overheating.
  In order to allow the Projector cooling, keep at least 40 cm  (...

7

2
DIGIOPTIC ™  IMAGE PROCESSOROFFON
DIGIOPTIC ™ IMAGE PROCESSOROFFON
2
2
2
1
3
3
5
4

3  UNPACKING
To unpack the projector safely and easily please follow steps 
1 to 5, as per drawing (Fig. 4).
It is recommended that the carton and packaging is retained 
for future use and in the unlikely event that your projector needs 
to be returned for repair.
Fig.4 

8

The carton should contain the following:
-  the projector
-   the DigiOptic™ Image Processor  
-  the remote control
-  four 1.5V AAA batteries (for remote control)
-  DigiOptic™ Image Processor power supply unit
-  three power cables for the projector (EU, UK, USA) 
-  three power cables for the DigiOptic™ Image Processor (EU, UK, USA) 
-  triple fiber optic cable for linking DigiOptic™ Image Processor and the projector
-  one cable HDMI™-HDMI™
-  one cable HDMI™-DVI 
-   two brackets for mounting...