Sim2 Multimedia Projector Rpu 290 Specifications

							RPU 290-291
The SIM2 DLP™ Rear-projection engines for Data and Video Input signals
deliver the highest contrast, best image quality, operational reliability,
serviceability to display your image 24/7/365.
Best image quality
The RPU 290-291 incorporates innovative, DLP™ Single Chip technology for a
superb image quality. The new DDR - 12° Chip enables the RPU 290-291 to
deliver both an impressive and superb contrast, resulting in a perfect image quality.
It delivers outstanding color and brightness uniformity.
All under control
With SIM2 Software, you can easily set the rear-projection parameters and
control your videowall. The SIM2 EasyWall 3 new software allows you to set all
the parameters (contrast, brightness, colorimetry etc.) and construct a simple
configuration.
Reliability
The inherent durability of the DMD™ and the long average life (10.000 hours*)
of 120 W VIP Dimmable lamp ensures low power dissipation, long lasting
operation, burn-in and flicker effects free display at any time. The RPU 290-
291 series are designed to reliably work in 24h/7days facilities. (*= in a 100 Watt
configuration)
Easy installation
The rear-projection engine is packaged in one single carton box. The gross
weight is around 11 Kg. The low net weight allows you to manage and install it
very easy.
Maintenance
Easy operations allow technicians, installers and Engineers to access the inside
of the engine for lamp and electronics and optics replacement, minimizing
downtime for service and maintenance. Key Points
-  1-Chip DLP™ digital technology
rear-projector
-  Choice of SXGA (1280x1024) or 
SXGA+ (1400x1050) native 
resolution, software selectable
-  New DDR- DarkChip2™-12° for an 
excellent contrast ratio (2000:1) 
-  Aspect ratio 5:4 on RPU290 and
4:3 on RPU291
-  Excellent white uniformity
-  Long life lamp, flicker free
-  New WA lens (Wide Angle), 
telecentric, multi elements
-  Wide band input board (270 MHz)
-  New DVI input
-  New robust RS485 control plus
RS232 control. USB as option
-  New Housing
-  Mechanical dimensions 
compatible with RPU 
						

							PROJECTION SYSTEM
Technology: DLP™ - 1 chip DMD DDR DarkChip™ - 12°
DMD™ Panel resolution:
- RPU 290: 1280x1024 (SXGA)
- RPU 291: 1400x1050 (SXGA+)
Aspect Ratio (W:H) :
- RPU 290: 5:4
- RPU 291: 4:3
Optical lens:  WA 0,737:1
Rear-projector Brightness : ~700 ANSI lm (100% white field @ 8000°K)
Uniformity: > 90% ANSI measurement
Contrast ratio: 2000:1 full on/full off
Number of colors: 16,777,216 colors
Color Temperature:6500°K - 12000°K adjustable, 3500°K reachable
Lamp Type:
- 120 W  High Pressure std 
- 150 W High Pressure as option
Average life: 120W 10.000 hours* (50% survival @50% integral lm maintenance)
ELECTRONICS
Horizontal frequency: 15KHz - 110 KHz
Vertical frequency : 48 Hz - 120 Hz (55 Hz - 65 Hz frame lock mode)
Analog bandwidth: 170 MHz @ -3dB for graphic signals, 8 MHz @ -2dB for video
signals
Graphic Standard: from VGA (640x480) to UXGA (1600x1200) with internal scaling
Video Standard: automatic decoding PAL, NTSC, SECAM
Internal magnification: from 0,75x to 16x
INPUT/OUTPUT SIGNALS
Graphic Inputs: 
1 x RGB+HV (or YPrPb) on 75 ohm BNC connectors
1 x RGB+HV on HD15 connector
Video Inputs: 
1 x CVBS + S (in/out) on 75 ohm BNC connectors
1 x S-VIDEO (in/out) on miniDIN4 connectors
ATSC HDTV is also supported on BNC or HD15 or DVI connectors
DVI Input / Output: Analog RGBHV (or YPrPb) + Digital RGB
Control Interface: Serial Interface RS232C or RS485 on DB9 in/out connectors or
USB (on request) for control from a remote PC; IR remote control handset (on
request)ELECTRICAL DATA
Main Power Supply: 100 Vac - 240 Vac +/- 10%; Line Frequency 48 - 62 Hz
Power Consumption: Max 185 W (160 Kcal/h)
Max Current Absorption: @120V:1,5 Arms @230V:0,8 Arms, 
Max Inrush Current:30A
Fuse:  T 3.15A H 5x20 mm located on the rear-projector
MECHANICAL DATA
EngineDimension: 336x183x228 mm (WxHxD)  
Package dimension:412x290x412 mm (WxHxD)
Gross weight: 11 Kg. with all accessory
ENVIRONMENTAL DATA
Ambient Temperature: Operating from 0° to +35°C, 
Storage and Transportation from -10°C to +55°C
Humidity: from 10% HR to 90% HR (without condensation)
Max Altitude: Operating 4.000 m, Transport 11.000 m
Installation Position: vertical, max number of stackable units 4 (without support
stucture)
SAFETY & REGULATORY DATA
Drop Test:in compliance with UNI EN 22247 and 22248
Safety: in compliance with EN 60950
EMC emission: in compliance with EN 55022
EMC immunity: in compliance with EN 55024
ACCESSORIES
Easywall: PC based control software suite
RC 2000: Remote Control Handset p/n 790010000SIM2 Multimedia is
certified(*) Lamp life: the hours have been  calculated under strict test conditions. Misuse or improper operating conditions may alter it.
Digital Light Processing™ and DLP™ are registered trademarks of Texas Instruments.
Due to constant product development, specifications and design might be subject to change without notice. RPU 290-291 - World - September 2005RPU 290-291
Headquarters:
SIM2 MULTIMEDIA S.p.A.
Viale Lino Zanussi, 11
33170 Pordenone - Italy 
Tel. +39.0434.383217
Telefax +39.0434.383261 
E-mail: [email protected] 
Web site: www.sim2.comGermany: 
SIM2 DEUTSCHLAND GmbH
Industriepark, 17
D-56291 Wiebelsheim
Tel. +49.0700.40050066
Fax. +49.0700.70080099
E-mail: [email protected]
web site: www.sim2de.comUK: 
SIM2 UK LTD 
Steinway House, Worth Farm
Little Horsted, Nr. Uckfield
East Sussex TN22 5TT
Tel. +44.01825.750850
Telefax +44.01825.750851
E-mail: [email protected]: 
SIM2 USA INC.
10108 USA Today Way
Miramar, FL 33025
Tel. +1.954.442.2999
Telefax +1.954.442.2998
E-mail: [email protected]
Web site: www.sim2usa.comrear-projection enginesConnectors panel TECHNICAL SPECIFICATIONS