Singer Professional 5 Manual

 
 
4. Turn the hand wheel toward you until the Chainstitch Looper extends out   
               10mm (approximately ½”) from the needle plate edge. 
 
 
 
 
 
 
 
 
 
 
  5. Thread the looper area of the machine following the brown color-coded  
               thread guides 4-11.  Use the tweezers provided in the accessory case to  
               aid in threading the looper. 
  
  6. Place the thread through threading guide f and g. 
 
 
           7. Continue threading guides h, i, j and k....

 
  5. Continue to thread points 4-8.  Slip the thread into the middle slot of the  
      thread guide g.  Go over the take up lever h.  Continue by slipping the  
               thread into the middle slot of the thread guides i and j.  
 
  6. Before threading the eye of the needle, make sure the thread is in front
 of  
               the thread guide located on the bottom of the needle clamp for the Cover  
               Stitch or Chainstitch. 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
  
  
  7. Thread the eye...

 
   
  
 
                   
 
                                  
Chapter 2: 
           Two-Thread Wrapped Edge    
    Overlock (narrow and wide)
 
 
   
 
 
 
 
 
 
 
 
 
      
 
                             
 
 
 
 
 
 
 
 
 
                                        

 
  
Two-Thread Wrapped Edge Overlock (narrow) 
 
The Two-Thread Wrapped Edge Overlock provides an elegant fine finish to lightweight  
fabrics.  When using clear threads in conjunction with the Two-Thread stitch, the  
fabric appears to have an invisible edge.  This gives a couture effect and looks  
beautiful on finer fabrics. The Two-Thread Stitch requires the lower looper thread and 
one overlock needle thread.  The lower looper thread wraps around the fabric’s edge. 
There are 2 different ways to...

 
  
    
 
Needle
: 
 
 
ATD: 
Auto Tension Dial  
         “D” 
Left Cover Stitch 
Needle “C” Unthreaded and 
Remove Needle 
Middle Cover Stitch 
Needle “D” Unthreaded and 
Remove Needle 
Right Cover Stitch 
Needle “E” Unthreaded and 
Remove Needle 
Overedge Left  
Needle “A” Unthreaded and 
Remove Needle 
Overedge Right Needle 
(Blue) “B”      Threaded 
Upper Looper 
  Looper Engaged  
and Not Threaded  
Lower Looper 
(Red)      Threaded 
Chain Stitch Looper  
(Brown)    Not Threaded 
Upper Knife...