Smeg Sa360x1 Manual

Contents 
 
 
1. INSTRUCTIONS FOR SAFE AND PROPER USE________________4 
2. INSTALLATION__________________________________________6 
3. DESCRIPTION OF CONTROLS_____________________________9 
4. USE OF THE OVEN______________________________________14 
5. AVAILABLE ACCESSORIES_______________________________15 
6. COOKING HINTS________________________________________16 
7. CLEANING AND MAINTENANCE___________________________19 
8. EXTRAORDINARY MAINTENANCE_________________________21...

Introduction 
 
1. INSTRUCTIONS FOR SAFE AND PROPER USE 
 
 
THIS MANUAL IS  AN INTEGRAL PART OF THE APPLIANCE AND THEREFORE MUST BE KEPT IN ITS ENTIRETY AND IN AN ACCESSIBLE PLACE FOR THE WHOLE WORKING LIFE OF THE OVEN. WE ADVISE CAREFUL READING OF THIS MANUAL AND ALL THE INSTRUCTIONS THEREIN BEFORE USING THE OVEN. INSTALLATION MUST BE CARRIED OUT BY QUALIFIED PERSONNEL IN ACCORDANCE WITH THE REGULATIONS IN FORCE. THIS APPLIANCE IS INTENDED FOR DOMESTIC USES AND CONFORMS TO CURRENT REGULATIONS IN...

Introduction 
 
  
  
NEVER PUT INFLAMMABLE OBJECTS IN THE OVEN: THEY COULD BE ACCIDENTALLY LIGHTED AND CAUSE FIRES.    DURING USE THE APPLIANCE BECOMES VERY HOT. TAKE CARE NOT TO TOUCH THE HEATING ELEMENTS INSIDE THE OVEN. TO AVOID BURNS AND SCALDS CHILDREN SHOULD BE KEPT AWAY 
  
THE I.D. PLATE WITH TECHNICAL DATA, REGISTRATION NUMBER AND BRAND NAME IS POSITIONED VISIBLY ON THE OVEN DOOR FRAME. THE PLATE MUST NOT BE REMOVED.  
  
THIS APPLIANCE IS DESIGNED FOR COOKING FOOD AND IT SHALL NOT BE USED AS...

Instructions for the installer 
 
2. INSTALLATION 
 
2.1 Electrical connection 
 
Check that mains voltage and power cable ratings are as per the 
indications provided on the label attached to the oven door frame.  
This label must never be removed.  
 
 
It is obligatory for the electrical system to be grounded according to the 
methods required by safety rules. 
 
 
If a plug and socket connection is being used make sure that the plug 
and socket are compatible. Avoid use of adapters and shunts as...

 
Instructions for the installer 
 
2.2 Mounting the oven The oven is designed for mounting into any piece of furniture as long as heat-resistant. Proceed according to the dimensions shown in Figures 1, 2 and 3. For installing under a work top, follow the dimensions given in Figure 1-3. For installing under a work top with combined heating plates, ensure a minimum clearance from any side walls of at least 110 mm as shown in Figure 1. For installing in a column, follow the dimensions given in Figure 1-2...

Instructions for the installer 
  
  
 Never use the oven door to lever the oven into 
place when fitting. 
Avoid exerting too much pressure on the oven door 
when open. 
  
 
 
8  

Instructions for the user 
  
3. DESCRIPTION OF CONTROLS  
3.1 Front control panel 
All the oven controls are grouped together on the front panel.  
  
  
  
FUNCTION SWITCH KNOB 
               
Rotate the knob in either direction to select desired function from the 
following: 
  
NO FUNCTION SET 
 
UPPER AND LOWER HEATING ELEMENT + VENTILATION  
  
UPPER AND LOWER  HEATING ELEMENT   
UPPER AND LOWER HEATING ELEMENT + VENTILATED HEATING ELEMENT 
  
GRILL ELEMENT 
 
VENTILATED  HEATING ELEMENT 
  
WIDE...

Instructions for the user 
 
THERMOSTAT KNOB 
Cooking temperature is selected by turning the 
knob clockwise to the desired setting, between 50° 
and 240°C.    
TIMER KNOB (ONLY ON SOME MODELS) 
Lets you choose manual cooking or the timer with 
automatic turn-off of the oven when done. 
For manual control of cooking time, turn the 
knob anticlockwise to the symbol . 
To set cooking time turn the knob clockwise. 
 
To set cooking time turn the knob clockwise. The numbers from 5 to 90 
correspond to...

Instructions for the user 
  
3.2.1 Setting the time 
When the oven is used for the first time, or after a power blackout, the 
display flashes on and off at regular intervals.  Press the  key for 1/2 
seconds to stop the display flashing and start setting of the current time. 
Press the value modification keys  or  to increase or decrease by 
one minute for each time a key is pressed. 
Press one of the two value modification keys until the current time 
appears. The clock will start from the time set...

Instructions for the user 
 
3.2.3 Programming 
 
Cooking duration time: the 2nd button  can be used to set the cooking 
time. Before setting it, turn the thermostat to the cooking temperature of 
choice and the function selector knob to any setting.  To set the cooking 
time, proceed as follows: 
 
- Press the  key for 1/2 seconds; the pointer will 
move to position 12 (Fig. 1). 
- Use the  and  keys to set the cooking time; 
whenever the  key is pressed, 1 minute will be 
added to the cooking time,...