Sony Ae 5 Service Manual
Have a look at the manual Sony Ae 5 Service Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 980 Sony manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
11 33 First Time Operation Advanced OperationAdvanced PresettingSorting of Programme PositionsAfter having used Automatic Tuning of channels you may wish to rearrange the order of the channels. 1Press MENU. Select the symbol using $. Push to Ó. 2Select Programme Sorting using $. Push to Ó to enter. 3Select the programme position of the channel you wish to sort using 4 or $. Push to Ó to enter. 4Move the channel to the new programme position using 4 or $. Store by pressing OK. The channel is now at the new position. The other programme positions move accordingly. 5To sort other programme positions repeat steps 3 to 4. 6Press MENU to return to the normal TV screen.Manual Tuning In of ChannelsUse this function to preset channels or a video input source one by one to programme positions of your choice. 1Press MENU. Select the symbol using $. Push to Ó. 2Select Installation using $. Push to Ó to enter. Select Manual Programme Preset using $. Push to Ó to enter. 3Select the programme position by pushing to 4 or $. Push twice to Ó. The column SYS is highlighted. 4Select the TV system using 4 or $. Push to Ó to enter.Available TV systems are B/G for western European countries, D/K for eastern European countries, EXT for a video input source (please go to step 5c after selecting EXT)The column SEARCH is highlighted. 5Select your method for the channel tuning using 4 or $. Push to Ó to enter.You have the choice between C for a terrestrial channel, S for a cable channel, F for direct frequency input. aDirect Channel Input - S, C or FFor channel numbers input a two digit number, for the channel frequency a three digit number. ¥ Select the two or three digits by using the number buttons 0 to 9. ¥ To start the search and to store the channel, press OK. ¥ To preset other channels repeat steps 3 to 5a. bChannel search (SEARCH)Use Search if you do not know the channel number or frequency ¥ Start the search for the next available channel by pushing to $. ¥ Store the channel by pressing OK or continue the search by pushing again to $. ¥ To search for other channels repeat steps 3 to 5b. cFor video input sources (EXT) ¥ Select the Video Input source using 4 or $. ¥ Store your selection by pressing OK. ¥ To allocate other sources repeat steps 3 to 5c. 6Press MENU to return to the normal TV screen. Programme SortingSelect: Enter:Set UpAuto Tuning Programme Sorting Select Next View Dolby Surround Set Up AV Preset Installation Select: Enter:PROG CH LABELProgramme SortingSelect Prog: Confirm: OK C03 TV 5 PROG CH LABEL 1 2 3 4 5 6 7 8 9 10 11C03 C05 C07 C08 C09 C11 C12 C13 C14 C15 C16TV 5 PRO 7 EU-SP SWF RTL SAT MDR DDI DSF RTL 2 KAB 1 C03 C05 C07 C08 C09 C11 C12 C13 C14 C15 C16TV 5 PRO 7 EU-SP SWF RTL SAT MDR DDI DSF RTL 2 KAB 1 1 2 3 4 5 6 7 8 9 10 11PROG SYS Off SKIP LABEL 1B/GInstallationSelect: Enter:Language/Country Manual Programme Preset Further Programme Preset RGB Set Up Picture Rotation Personal ID Demo O - - - - - - - Manual Programme PresetSelect: Enter:PROG SEARCHSYS SKIP LABEL C09 C10ARD BBC B/G B/G Off Off Off Off Off Off Off Off Off Off Off 1 2 3 4 5 6 7 8 9 10 11 PROG Off SKIP 1 B/G D/K EXTSEARCHC S FSEARCH SYS LABEL PROG SEARCHSYS Off SKIP LABEL 0EXT AV 1 RGB AV 2 YC2 AV 3 YC3AV 1 PROG SYS Off SKIP LABEL 1B/G SEARCH03SEARCH 33 First Time Operation Advanced OperationAdvanced PresettingSorting of Programme PositionsAfter having used Automatic Tuning of channels you may wish to rearrange the order of the channels. 1Press MENU. Select the symbol using $. Push to Ó. 2Select Programme Sorting using $. Push to Ó to enter. 3Select the programme position of the channel you wish to sort using 4 or $. Push to Ó to enter. 4Move the channel to the new programme position using 4 or $. Store by pressing OK. The channel is now at the new position. The other programme positions move accordingly. 5To sort other programme positions repeat steps 3 to 4. 6Press MENU to return to the normal TV screen.Manual Tuning In of ChannelsUse this function to preset channels or a video input source one by one to programme positions of your choice. 1Press MENU. Select the symbol using $. Push to Ó. 2Select Installation using $. Push to Ó to enter. Select Manual Programme Preset using $. Push to Ó to enter. 3Select the programme position by pushing to 4 or $. Push twice to Ó. The column SYS is highlighted. 4Select the TV system using 4 or $. Push to Ó to enter.Available TV systems are B/G for western European countries, D/K for eastern European countries, EXT for a video input source (please go to step 5c after selecting EXT)The column SEARCH is highlighted. 5Select your method for the channel tuning using 4 or $. Push to Ó to enter.You have the choice between C for a terrestrial channel, S for a cable channel, F for direct frequency input. aDirect Channel Input - S, C or FFor channel numbers input a two digit number, for the channel frequency a three digit number. ¥ Select the two or three digits by using the number buttons 0 to 9. ¥ To start the search and to store the channel, press OK. ¥ To preset other channels repeat steps 3 to 5a. bChannel search (SEARCH)Use Search if you do not know the channel number or frequency ¥ Start the search for the next available channel by pushing to $. ¥ Store the channel by pressing OK or continue the search by pushing again to $. ¥ To search for other channels repeat steps 3 to 5b. cFor video input sources (EXT) ¥ Select the Video Input source using 4 or $. ¥ Store your selection by pressing OK. ¥ To allocate other sources repeat steps 3 to 5c. 6Press MENU to return to the normal TV screen. Programme SortingSelect: Enter:Set UpAuto Tuning Programme Sorting Select Next View Dolby Surround Set Up AV Preset Installation Select: Enter:PROG CH LABELProgramme SortingSelect Prog: Confirm: OK C03 TV 5 PROG CH LABEL 1 2 3 4 5 6 7 8 9 10 11C03 C05 C07 C08 C09 C11 C12 C13 C14 C15 C16TV 5 PRO 7 EU-SP SWF RTL SAT MDR DDI DSF RTL 2 KAB 1 C03 C05 C07 C08 C09 C11 C12 C13 C14 C15 C16TV 5 PRO 7 EU-SP SWF RTL SAT MDR DDI DSF RTL 2 KAB 1 1 2 3 4 5 6 7 8 9 10 11PROG SYS Off SKIP LABEL 1B/GInstallationSelect: Enter:Language/Country Manual Programme Preset Further Programme Preset RGB Set Up Picture Rotation Personal ID Demo O - - - - - - - Manual Programme PresetSelect: Enter:PROG SEARCHSYS SKIP LABEL C09 C10ARD BBC B/G B/G Off Off Off Off Off Off Off Off Off Off Off 1 2 3 4 5 6 7 8 9 10 11 PROG Off SKIP 1 B/G D/K EXTSEARCHC S FSEARCH SYS LABEL PROG SEARCHSYS Off SKIP LABEL 0EXT AV 1 RGB AV 2 YC2 AV 3 YC3AV 1 PROG SYS Off SKIP LABEL 1B/G SEARCH03SEARCH
12 34Captioning a Station NameDuring presetting the channels are usually labelled automatically. You can, however, individually name a channel or a video input source. 1Press MENU. Select the symbol using $. Push to Ó. 2Select Installation using $. Push to Ó to enter. Select Manual Programme Preset using $. Push to Ó to enter. 3Select the programme position of the channel or the video source you wish to label by pushing to $ or 4. Push repeatedly to Ó until the first element of the position LABEL is highlighted. 4Select a number, a letter, + or a blank using 4 or $. Push to Ó to confirm. Select the other four characters in the same way. 5Store your selection by pressing OK. 6To label other channels or video sources repeat steps 3 to 5. 7Press MENU to return to the normal TV screen. Skipping of Programme PositionsIn case of 100 programme positions there may be unused positions, which you can skip in the menu Manual Programme Preset. When changing channels with the PROGR +/Ð buttons they do then not appear. You can, however, still select them using the number buttons. 1Press MENU. Select the symbol using $. Push to Ó. 2Select Installation using $. Push to Ó to enter. Select Manual Programme Preset using $. Push to Ó to enter. 3Select the programme position you wish to skip by pushing to 4 or $. Push to Ó to enter. The column SKIP is highlighted. 4Select ON using $. 5Store by pressing OK. 6To skip other programme positions repeat steps 3 to 5. 7Press MENU to return to the normal TV screen.Advanced Operation Advanced Presetting Manual Programme PresetSelect: Enter:PROG SEARCHSYS SKIP LABEL C09 C10ARD BBC B/G B/G Off Off Off Off Off Off Off Off Off Off Off 1 2 3 4 5 6 7 8 9 10 11PROG SEARCHSYS Off SKIP LABEL 6B/G C07TE Manual Programme PresetSelect: Enter:PROG SEARCHSYS SKIP LABELPROG SEARCHSYS SKIP LABEL 53B/G F189 - - - Off OnC09 C10ARD BBC B/G B/G Off Off Off Off Off Off Off Off Off Off Off 51 52 53 54 55 56 57 58 59 60 61 35 Advanced Operation Using of Further Programme PresetUsing the menu Further Programme Preset you can a) individually adjust the volume level of each channel. b) improve the quality of a weak channel (picture or sound distortions) with manual fine tuning. c) preset the AV output for programme positions of those channels with scrambled signals (e.g. from a Pay TV decoder). In this way a connected VCR records the unscrambled signal. 1Press MENU. Select the symbol using $. Push to Ó. 2Select Installation using $. Push to Ó to enter. Select Further Programme Preset using $. Push to Ó to enter. 3Select the programme position of the desired channel by pushing to 4 or $. Push repeatedly to Ó to select: VOL (Volume Offset), AFT (Automatic Fine Tuning) or DECODER. The selected item changes colour. 4 a VOL Push to 4 or $ to adjust the volume level (range -7 to +7) of the channel. Store by pressing OK. Repeat steps 3 and 4a if you wish to adjust the volume level of other channels. b AFT Push to $ to select OFF. Push to Ó to enter Manual Fine Tuning. Push to 4 or $ to fine tune the channel (range -15 to +15). Store by pressing OK. Repeat steps 3 and 4b if you wish to fine tune other channels. c DECODER Push to 4 or $ to select AV1 (Euro AV socket 1) or AV2 (Euro AV socket 2) as output for the video source on this programme position. Store by pressing OK. Repeat steps 3 and 4c if you wish to preset the AV output of other video sources.Should you use Auto Tuning afterwards, this setting will be cancelled. 5Press MENU to return to the normal TV screen. Advanced Presetting InstallationSelect: Enter:Language/Country Manual Programme Preset Further Programme Preset RGB Set Up Picture Rotation Personal ID Demo O - - - - - - - Further Programme PresetSelect: Enter:PROG AFTVOL DECODER On On OnOff Off Off 0 0 0 1 2 3 4 5 6 7 8 9 10 11 PROG AFT DECODER 1VOL 0 PROG DECODER 1VOL -5AFT On Off PROG DECODER 1VOL -5AFT On Off AV 1 AV 2
13 36 When connecting an RGB source such as a Sony playstation you may need to readjust the picture geometry. 1Select the connected RGB source by pressing É repeatedly. 2Press MENU. Select the symbol using $. Push to Ó. 3Select Installation using $. Push to Ó to enter. Select RGB Set Up using $. Push to Ó to enter. 4Select H Centre by pushing to Ó. Adjust the centre of the picture (range from -5 to +5) using 4 or $. Store by pressing OK. 5Select H Size using $. Push to Ó to enter. Adjust the horizontal coordinates (range from -5 to +5) using 4 or $. Store by pressing OK. 6Press MENU to return to the normal TV screen. Advanced Presetting Advanced Operation Adjusting the Picture RotationBecause of the earth magnetism the picture might slant. In this case you can readjust the picture. 1Press MENU. Select the symbol using $. Push to Ó. 2Select Installation using $. Push to Ó to enter. Select Picture Rotation using $. Push to Ó to enter. 3Adjust the Picture Rotation (adjusting range -4 to +4) by pushing to 4 or $. Store by pressing OK. 4Press MENU to return to the normal TV picture. Adjusting the Picture Geometry for an RGB Source RGB Set UpAdjust Position: Confirm: OKH CentreOH SizeORGB Set UpAdjust Position: Confirm: OKH CentreOH SizeOInstallationSelect: Confirm: OKLanguage/Country Manual Programme Preset Further Programme Preset RGB Set Up Picture Rotation Personal ID DemoO 37 Using AV Preset you can select the automatic format function and label an input source. 1Press MENU. Select the symbol using $. Push to Ó. 2Select AV Preset using $. Push to Ó to enter. 3Select the desired AV input (AV 1, 2 or 3) using 4 or $. Push to Ó enter. After each step you have the choice between memorizing (press OK) or going to the next item (push to Ó). 4For automatic format selection of the AV input: aPush to Ó to select Auto Format. bSelect On or Off using 4 or $. 5To label the source: aPush to Ó to select Label. bSelect the first character using 4 or $. Push to Ó to confirm. cRepeat step b to select the other 4 characters. dStore by pressing OK. 6Repeat steps 3 to 5 for the other AV inputs. 7Selecting the AV3 Input Source:In case of AV3 you have the choice between the front AV3 sockets BCor the rear Scart 3 L connector. aPush to $ to select AV3 Input. Push to Ó to enter. bSelect Front or Rear using 4 or $. cStore by pressing OK. 8Press MENU to return to the normal TV screen.Presetting and Labelling of Input SourcesAdvanced PresettingInputting Your Personal IDYou can programme your TV with a safety code, so that you can be traced if your TV is stolen and recovered. This code can only be input once! Make sure to write it down in this Instruction Manual. 1Press MENU. Select the symbol using $. Push to Ó. 2Select Installation using $. Push to Ó to enter. Select Personal ID using $. Push to Ó to enter. 3aSelect the first of a total of 11 characters (letter, number, + or a blank) by using 4 or $. bPush to Ó to go to the next character. cRepeat a and b for all characters. 4Store by pressing OK. 5Press MENU to return to the normal TV screen. Advanced OperationInstallationSelect: Confirm: OKLanguage/Country Manual Programme Preset Further Programme Preset RGB Set Up Picture Rotation Personal ID Demo- - - - - -AV PresetSelect Mode: Enter:AV 3 InputRearINPUT LABEL AUTO FORMAT VIDEO VIDEO VIDEO On On On AV 1 AV 2 AV 3AV PresetSelect Mode: Confirm: OKAV 3 InputINPUT LABEL AUTO FORMAT VIDEO VIDEO VIDEO On On On AV 1 AV 2 AV 3Front Rear
14
38Advanced TV operation
Picture and sound are adjusted at the factory. You can, however, adjust
them individually.
1Press MENU.
Select the symbol
for Picture or
for Sound using 4 or $.
Push to Ó to enter.
The menu Picture or Sound Control is displayed.
2Select the desired item using 4 or $. Push to Ó to enter.
3Adjust the selected item using 4, $, Ó and Ò. Press OK to store.Refer to the tables on this and the following page for more information.
4Repeat steps 2 and 3 to adjust other items.
5Press MENU to return to the normal TV screen.
Picture Control
Item Effect/Operation
Picture Mode$Personal (for individual settings)
Movie (for movie broadcasts)
4Live (for live broadcasts)
Contrast LessÒÓ MoreBrightness* DarkerÒÓ BrighterColour* LessÒÓ MoreHue** GreenishÒÓ ReddishSharpness* SofterÒÓ SharperReset Resets picture to the factory preset levels
AI$Off: normal
(Artificial Intelligence)4On: Automatic optimization of contrast level
according to the TV signal
Noise Reduction$Off: Normal
4On: Reduces picture noise in case of a weakbroadcasting signal
* Only if Personal is selected in Picture Mode
** Only available for NTSC colour signal (e.g. US video tapes)
Adjusting Picture and Sound
Advanced Operation
Picture AdjustmentSelect Mode: Enter:Picture Mode
Contrast
Brightness
Colour
Sharpness
Reset
AI
Noise ReductionPersonal
On
On
Picture Mode
Personal
Movie
Live
ContrastAI
On
Off
Noise Reduction
On
Off
39 Sound Control
Item Effect/Operation
Equaliser Mode Select between the following sound settings
4Personal
Vocal
Jazz
Rock
Pop
$Flat (fixed setting, cannot be adjusted)
Equaliser adjustment
You can adjust the mode selected in Equaliser
mode by cutting and boosting of 5 selected
frequency bands.Only the changes made in Personal can be stored,
the others return to factory setting.
Select the desired bar using Ó or Ò, adjust using 4
and $.Press OK to store.
Balance4More left
$More right
Loudness4Off: Normal$On: For music broadcasts
Space4Off: Normal$On: Special accoustic effect
Auto Volume Control$On: volume level of the channels will stay the same
independent of the broadcast signal
(e.g. in case of advertisements)
4Off: volume level changes according to the
broadcast signal
Dual Sound
¥
For a bilingual broadcast:
A for channel 1Ò ÓB for channel 2
¥
For a stereo broadcast:
StereoÒ ÓMonoFor a Nicam broadcast: When receiving a Nicambroadcast ÈNICAMÇ appears briefly on the screen.
Headphones
2 Volume Less Ò ÓMore
2 Dual Sound
¥
For a bilingual broadcast:
A for channel 1ÒÓB for channel 2
¥
For a stereo broadcast:
StereoÒÓMono
¥
PIPWhen PIP is switched on, you can additionallyselect the PIP sound for the headphones
Advanced TV operation
Advanced OperationEqualiser AdjustmentSel: Adjust: Confirm:OKPersonal
+
0
–120 150 1,5K 5 K 10 KAudio AdjustmentEqualiser Mode
Equaliser
Adjustment
Balance
Loudness
Space
Auto Vol. Control
Dual Sound
Volume
Dual SoundPersonal
MonoOffOn
MonoPersonal
Vocal
Jazz
Rock
Pop
Flat
Select Mode: Confirm: OK
Off
BalanceLoudness
On
Off
Space
On
Off
Auto Vol. Control
On
Off
Dual Sound
Stereo
Mono
VolumeDual Sound
Stereo
Mono
15 40Using the Features Menu1Press MENU. Select the symbol using $. Push to z. 2Select the desired menu item using $. Push to z to enter. 3Select the desired setting using 4 or $. 4Store by pressing OK. 5Press MENU to return to the normal TV screen. Advanced Operation Advanced TV operationFeaturesItem Effect/Operation Auto Format$On: Automatic selection of the screen format 4Off: Normal mode PIP Position See next page for details Sleep Timer You can select a time period after which the TV switches itself into standby mode $Off 10 min. 20 min. . . . 490 min. Parental Lock$Off: Normal mode 4On: TV can only be switched on out of standby-mode using the Remote Commander, the buttons on the TV do not work. AV2 SourceYou can select the source to be output from the Scart connector Y2/j2. In this way you can record from this socket while watching another source. $TV audio/video signal from the aerial ù AV1 audio/video signal from Scart 1 AV2 audio/video signal from Scart 2 4AV3 audio/video signal from front or rear connectors FeaturesAuto Format PIP Position Sleep Timer Parental Lock AV 2 Source OnOff Off TV Select: Enter:Auto Format Off On Parental Look Off On10 min Sleep TimerAV 2 Source AV 3 AV 2 AV 1 TV 41 Advanced Operation Using Picture-in-PicturePicture-in-Picture (PIP) lets you display a second, small screen within the main TV picture. In this way you can watch the video output from any connected equipment, e.g., from a VCR, while watching TV.Switching PIP on and off ¥ Press «/« 6 . The small screen is displayed.The source of the small screen is the one last used when the TV was on. ¥ Press «/« 6again to switch PIP off. Selecting a PIP source 1Press > 5. The symbol > is displayed in the bottom left-hand corner of the screen. 2Press É3 repeatedly until the desired source appears.You can select between TV, AV1, AV2, YC2, AV3 and YC3. vIf no video source (e.g. VCR or Camera) is connected, the PIP will be noisy. vYou cannot display an RGB source in the PIP.Swapping the screens ¥ Press 4. The two screens are swapped.Changing channels if the TV picture is in the PIP ¥ First press >, then the respective number buttons.Changing the PIP positionThere are four different positions of the small screen within the main screen. Select the PIP position in the Features menu. 1Press MENU. Select the symbol using $. Push to Ó to enter. 2Select PIP position by pushing to $. Push to Ó to enter. 3Select the desired position using $ or 4. Press OK to select. 4Press MENU to return to the normal TV screen. B AA B I PIP >Main screen> > >> Advanced TV operation FeaturesAuto Format PIP Position Sleep Timer Parental Lock AV 2 Source OnOff Off TV Select: Enter:
16 42TeletextMost TV channels broadcast information via teletext. The index page of the teletext service (usually page 100) gives you information on how to use their service.!Make sure to use a TV channel with a strong signal, otherwise there may be Teletext errors.Direct Access FunctionsSwitching Teletext on and off1Select the TV channel which carries the teletext service you want to view. 2aPress f @¼ once to switch teletext on. The teletext menu is displayed. bPress f twice for Mix mode.The TV broadcast and the Teletext display are overlapped. 3Press ; @Á or press f a third time to switch teletext off. Selecting a Teletext PageDirect Page Selection¥ Input the three digits of the page number using the number buttons 7.If you have made a mistake: Type in any three digits, then reenter the correct page number. Page Catching 1Select a teletext page which has several page numbers on it (e.g., the index page). 2Press OK !Á.Page Catching is displayed at the top of the page 3Select the desired page number using 4 or $ !Á and press OK.The requested page is displayed after some seconds. Selecting the next or the preceding page ¥ Press !£ (Page +) or (Page -). Selecting the index page¥ Press +; 2. Selecting a subpage A teletext page may consist out of several subpages. In this case an information line is displayed, showing the number of the subpages. ¥ Select the mode by pushing to 4. Select the subpage by using 4 or $. Freezing a Teletext subpage1Press 3 or R The symbol R 3 is displayed and the subpage is not updated. 2Press f @¼ to resume normal teletext reception. Using Fastext**depending on availability of service Fastext lets you access pages with one button stroke. When Fastext is broadcast, a colour-coded menu appears at the bottom of the screen. The colours of this menu correspond to the red, green, yellow and blue buttons on the Remote Control 9, !¼, !¢, !°. ¥ Press the coloured button which corresponds to the colour in the colour-coded menu.Advanced Operation 216-0201 03 04 05 06 07 0802 43 Using the Teletext MenuThis TV set has a menu-guided teletext system. When teletext is switched on you can use the joystick buttons to operate the teletext menu. Select the menu functions as follows: 1Press MENU !ª.The Teletext menu is superimposed on the teletext display. 2Select the teletext function using 4 or $ !Á. Push to Ó to enter. Top/Bottom/Full For convenient reading of a Teletext page you can enlarge it.After having selected the function, a sub menu Top 4 Bottom $ Full OK is displayed. ¥ Push to 4 to enlarge the upper half of the screen, push to $ to enlarge the lower half. Press OK to resume the normal size. Text Clear After having selected the function, you can watch a TV channel while waiting for a requested Teletext page. As soon as the page is available, the symbol f changes colour. ¥ Press f to view the page. Reveal Some teletext pages contain hidden information (e.g., for a quiz), which you can reveal.After having selected the function, the hidden information appears.¥Press f to resume the normal Teletext operation. Time Page**depending on availability of service You can call up a time-coded page - such as an alarm page - at a time specified by you.After having selected the function a sub menu is displayed. 1Select On using 4 or $. Push to Ó to enter. 2Enter the three digits of the desired page using the number buttons 7. Push to Ó after each digit. 3Enter the four digits of the desired time using the number buttons 7. Push to Ó after each digit. 4Press OK to store.The time is displayed in the top left-handed corner of the screen. At the requested time the page is displayed. Teletext Advanced OperationTeletextTop / Bottom / Full Text Clear Reveal Time PageSelect: Enter: Top: Bottom: Full: OK Time Page PAGE TIMESelect: Enter:– – – - - : - -
17
2-1. REAR COVER REMOVAL
2-3. SERVICE POSITION 2-2. CHASSIS ASSY REMOVAL
1
6 Screws
BTV 4x16
2 Rear Cover
2-4. U BOARD REMOVAL
1 Push the claw
in the direction of
the arrow and
remove.
2 Pull the Board in
the direction of the
arrow and remove.
SECTION 2
DISASSEMBLY
18 2-5. J BOARD REMOVAL 2-7. B1 BOARD REMOVAL 2-6. J SHIELD REMOVAL 1 Push the claw in the direction of the arrow and remove. 2 Pull the Board in the direction of the arrow and remove. 1 Push the claw in the direction of the arrow and remove. 2 Push the claw in the direction of the arrow and remove. 3 Remove the shield in the direction of the arrow. All other boards are removed in a similar manner to those shown NOTE
19
Anode button
a
* REMOVING PROCEDURES.
Turn up one side of the rubber cap in
the direction indicated by the arrow a 12 Using a thumb pull up the rubber cap
firmly in the direction indicated by the
arrow b3 When one side of the rubber cap is
separated from the anode button, the
anode-cap can be removed by turning
up the rubber cap and pulling it up in
the direction of the arrow c
bbc
Note : Short circuit the anode of the picture tube and the anode cap to the metal chassis, CRT shield or carbon paint on the CRT, after removing the anode.
• REMOVAL OF ANODE-CAP
• HOW TO HANDLE THE ANODE-CAP
1 To prevent damaging the surface of the anode-cap do not use sharp materials.
2 Do not apply too great a pressure on the rubber, as this may cause damage to
the anode connector.
3 A metal fitting called a shatter hook terminal is fitted inside the rubber cap.
Do not turn the rubber foot over excessively this may cause damage if the
shatter hook sticks out.
Cushion
7 DGC holder
Picture tube 11 C board 3
Spring tension 9 Degaussing coils 8
Anode cap 1
Neck assy 5
VM board 4
Deflection yolk 6
2 Chassis assy
10 Four PT screws
2-8. PICTURE TUBE REMOVAL
20 REMOVAL AND REPLACEMENT OF THE MAIN-BRACKET BOTTOM PLATES.(1) REMOVING THE PLATESIn the event of servicing being required to the solder side of the D Board printed wiring board, the bottom plates fitted to the main chassis bracket require to be removed. This is performed by cutting the gates with a sharp wire cutter at the locations indicated by arrows. Note :There are 4 plates fitted to the main bracket and secured by 4 gates. Only remove the necessary plate to gain access to the printed wiring board. (2) REFITTING THE PLATESBecause the plates differ in size it is important that the correct plates are refitted in their original location. Please note that the plates need to be rotated 180 degrees from the cut position to allow the tabs to be fitted in the catch positions. £ For safety reasons, on no account should the plates be removed and not refitted after servicing. Ta b Catch