Sony Bravia Kdl46hx750 46 Inch Operating Instructions

							D:\TVs JOB\SONY TV\SY0413_B1\4411895111_US\US03STU.fm
KDL-HX751/HX750
4-411-895-11(1)
11
Getting Started
To detach the Table-Top Stand from the TV, 
remove the screws   fixed in step 2. 
~
Do not remove the Table-Top Stand for any 
reason other than to install corresponding 
accessories on the TV.
When removing the Table-Top Stand from 
the TV, lay the display face down on a stable 
work surface that is larger than the TV.
To prevent damaging the surface of the LCD 
display, make sure to place a soft cloth on 
the work surface.
When installing the TV on a wall, remove the 
screws from the rear of the TV. Be sure to 
store the removed screws in a safe place, 
keeping them away from children.
When attaching the Table-Top Stand again, 
be sure to fasten the screws (previously 
removed) to the original holes on the rear of 
the TV.
2: Adjusting the 
viewing angle of 
the TV
This TV can be adjusted within the angles as 
illustrated.
xAngle adjustment (Swivel)
~
When adjusting the angle, hold the stand 
with one hand to avoid having the stand slip 
or TV tip over.
Detaching the Table-Top 
Stand from the TV
15°
15°15°
15°
 
						

							D:\TVs JOB\SONY TV\SY0413_B1\4411895111_US\US03STU.fm
KDL-HX751/HX750
4-411-895-11(1)
12
3: Connecting the TV
~
Use an antenna cable connector no greater 
than 14 mm thick.
Use an HDMI cable connector within 12 mm 
(thickness) × 21 mm (width).
xShown with a Set Top Box with 
HDMI connection
Recommendation of the F type plug
The one based on the following drawing is 
recommended about the F type plug.
Projection of the inner wire from the 
connection part must be less than 1.5 mm.
xShown with a Set Top Box with 
COMPONENT connection
Set Top Box
1.5 mm max.
(Reference drawing of the F type plug)
Set Top Box
 
						

							D:\TVs JOB\SONY TV\SY0413_B1\4411895111_US\US03STU.fm
KDL-HX751/HX750
4-411-895-11(1)
13
Getting Started
xCable System or VHF/UHF Antenna System
xShown with HD BRAVIA
® Sync™ Basic Connection
Cable or 
Antenna
*1Rear of TV
*
1Blu-ray Disc
HD Cable Box or 
HD Satellite Receiver*
1A/V Receiver
SAT (Dish)
Cable/Antenna
*1Signifies a BRAVIA Sync capable device.
*2The optical connection is only needed for A/V receivers that do not support ARC (Audio Return Channel).
*2Optical Connection
(Continued)
 
						

							D:\TVs JOB\SONY TV\SY0413_B1\4411895111_US\US03STU.fm
KDL-HX751/HX750
4-411-895-11(1)
14
xShown with HD Basic Connection with Home Theater System
VIDEO
L
R
Rear of TVCable/
Antenna
or
Blu-ray Disc/DVD
SD Cable Box or
SD Satellite Receiver
Cable/SAT 
(Dish) Home Theater System*Optical 
Connection
* The optical connection is only needed for home theater system that do not support ARC (Audio Return 
Channel) when connecting with HDMI.
Rear of TV
 
						

							D:\TVs JOB\SONY TV\SY0413_B1\4411895111_US\US03STU.fm
KDL-HX751/HX750
4-411-895-11(1)
Getting Started
15
xShown with PC Connection with SD VCR/DVD
PC  IN
RGB
AUDIO
OUT/
PC/HDMI 2
AUDIO IN
1
2
2
3
Rear of TVSide Panel
PC
DVD VCR Splitter
Cable/AntennaVCR/DVD ComboNotebook PC
or
Rear of TV
 
						

							D:\TVs JOB\SONY TV\SY0413_B1\4411895111_US\US03STU.fm
KDL-HX751/HX750
4-411-895-11(1)
16
4: Securing the TV
Sony strongly recommends 
taking measures to prevent 
the TV from toppling over.
Unsecured TVs may topple 
and result in property 
damage, serious bodily 
injury or even death.
 Secure the TV to a wall and/or stand.
 Do not allow children to play or climb on 
furniture and TV sets.
 Avoid placing or hanging items on the 
TV.
 Never install the TV on:
– slippery, unstable and/or uneven 
surfaces.
– furniture that can easily be used as 
steps, such as a chest of drawers.
 Install the TV where it cannot be pulled, 
pushed, or knocked over.
 Route all AC power cords and 
connecting cables so that they are not 
accessible to curious children.
Consider the following measures when 
securing your TV to a Stand (not supplied).
1Secure the Stand for the TV.
Make sure the Stand can adequately 
support the weight of the TV. Use two 
angle braces (not supplied) to secure 
the stand. For each angle brace use the 
appropriate hardware to:
Attach one side of the angle brace to 
the wall stud.
Attach the other side to the Stand.
2Secure the TV to the Stand.
Use the optional hardware listed as 
follows (not supplied):
M4 machine screw (screwed into the 
TV’s Table-Top Stand)
A screw or similar (attach it to the 
Stand)
Rope or chain (strong enough to 
support the weight of the TV). Make 
sure that there is no excess slack in 
the rope or chain.
An alternative way to secure the TV is 
with an optional Sony Support Belt Kit. 
The Sony Support Belt Kit is available as 
an optional accessory, depending on 
your TV model.
The length of the M4 machine screw 
differs depending on the rope or chain 
diameter. Please see below illustration.
Preventing the TV from 
Toppling
Recommended Measures 
to Secure the TV
StandAngle brace 
(not supplied)
M4 
machine 
screw (not 
supplied)
Screw (not supplied) Screw hole on 
the Table-Top 
StandRope or 
chain (not 
supplied)
Screw M4
Rope or 
chain
TV’s 
Table-Top 
Stand 6-8 mm
 
						

							D:\TVs JOB\SONY TV\SY0413_B1\4411895111_US\US03STU.fm
KDL-HX751/HX750
4-411-895-11(1)
17
Getting Started
~Contact Sony Customer Support to obtain 
the optional Support Belt Kit by providing 
your TV model name.
For United States call: 1-800-488-7669 or 
visit: http://www.sony.com/accessories
For Canada call: 1-877-899-7669
3Anchor the TV to the Wall.
Anchor the TV to the wall by using bolts, 
wall anchor and chain (or rope).
~
Securing the TV to the stand without 
securing the TV and the stand to the wall 
provides minimum protection against the 
TV toppling over. For further protection, 
be sure to follow the three measures 
recommended.
5: Bundling the 
cables
Before bundling the cables, remove the 
cable holder from the AC cover. Reuse the 
cable holder to bundle the other cables.
~
Do not bundle the AC power cord together 
with other cables.
* When installing on the wall, attach the cable holder 
under the terminals.
Anchor bolts (M6) (not supplied)
Wall-
mount 
holes
Rope or 
chain (not 
supplied)
Wall-anchor 
(not 
supplied)
12
4
3
*
 
						

							D:\TVs JOB\SONY TV\SY0413_B1\4411895111_US\US03STU.fm
KDL-HX751/HX750
4-411-895-11(1)
18
6: Connecting the TV 
to the Internet
When you connect this TV to the Internet, 
you can enjoy multiple functions: displaying 
a photograph that shows its location on the 
map, enjoying Internet video, etc. For details 
on the functions, refer to the i-Manual.
~
You will need to contract with an Internet 
service provider to connect to the Internet.
~
For LAN connections, use a Category 7 
cable (not supplied).
The built-in wireless LAN device allows you 
to access the Internet and your home 
network. With this feature, you can connect 
to a wireless LAN and enjoy the benefits of 
networking in a cable-free environment. 
Before setting up the wireless LAN function 
of the TV, be sure to set up a wireless LAN 
router.
Preparing a wired network
TV
Internet
Modem 
with router 
functions
Router
Modem
Internet or
Preparing a wireless LAN
Wireless 
router
Modem
Internet TV
 
						

							D:\TVs JOB\SONY TV\SY0413_B1\4411895111_US\US03STU.fm
KDL-HX751/HX750
4-411-895-11(1)
19
Getting Started
7: Running initial 
setup
1Complete your cable connections before 
proceeding with the Initial Setup. 
Connect the TV to your nearest power 
outlet.
2Press "/1 on the TV. The = (power) 
indicator will light up in green.
When you switch on the TV for the first 
time, the Language menu appears on 
the screen.
~
When you turn on the TV for the first time, 
the TV requires some internal processing 
for optimization before you can perform 
the initial setup. There will be no picture 
and sound, and the timer indicator on the 
front of the TV blinks orange for about 40 
seconds. Do not turn off the TV during 
this process.
This process has been completed at the 
factory for some TVs. 
3Press F/f/G/g to select an item, then 
press .
Follow the instructions on the screen.~
Home mode sets the TV to settings 
optimized for home viewing (this setting 
is ENERGY STAR compliant).
4Select Continue to scan for available 
channels and enable the Rovi On 
Screen Guide™ feature. If you receive 
channels from a cable box or satellite 
receiver and do not wish to use the TV’s 
built-in tuner, select Skip.
Selecting Skip will disable the Rovi On 
Screen Guide feature, which is only 
available when the TV’s tuner is used.
~
If you skip the channel scan while in the 
setup menus, Rovi On Screen Guide will 
be disabled.
5Set up the Internet settings. Select Auto 
to connect to the network automatically. 
Select Custom to connect manually.
If you do not access the Internet, or to 
set up later, select Skip.
~
If you use WEP security, select Custom 
t Wireless Setup t Scan. Then, 
select the network name (SSID) you want 
to connect. If you cannot find the 
required network name, select [Manual 
Entry] and press   to enter network 
name.
Use the optional USB Wireless LAN 
Adapter to connect with your wireless 
router (or access point) at 5GHz. Insert 
USB Wireless LAN Adapter and set 
Standby for Wi-Fi Direct to Off. Press 
HOME, then select Settings t Network 
t Standby for Wi-Fi Direct t Off.
To set Network Setup later, press 
HOME, then select Settings t Network 
t Network Setup.
 
						

							D:\TVs JOB\SONY TV\SY0413_B1\4411895111_US\US03STU.fm
KDL-HX751/HX750
4-411-895-11(1)
20
Using a Wall-Mount 
Bracket
Your TV can be mounted on a wall using a 
Wall-Mount Bracket (not supplied) out of the 
box as packaged. If the Table-Top Stand is 
attached to the TV, the TV may require 
detaching the Table-Top Stand; see 
page 11 (Detaching the Table-Top Stand 
from the TV). 
Prepare the TV for the Wall-Mount Bracket 
before making cable connections.
For product protection and safety 
reasons, Sony strongly recommends that 
you use the Wall-Mount Bracket designed 
for your TV and the installation should be 
performed by a Sony dealer or licensed 
contractor.
 See page 35 (Compatible Wall-Mount 
Bracket Information).
 Follow the instruction guide provided 
with the Wall-Mount Bracket for your 
model. Sufficient expertise is required in 
installing this TV, especially to determine 
the strength of the wall for withstanding 
the TV’s weight.
 Be sure to use the screws supplied with 
the Wall-mount bracket when attaching 
the mounting hooks to the TV set.
The supplied screws are designed so 
that they are 8 mm to 12 mm in length 
when measured from the attaching 
surface of the mounting hook.
The diameter and length of the screws 
differ depending on the Wall-mount 
bracket model. Use of screws other than 
those supplied may result in internal 
damage to the TV set or cause it to fall, 
etc. Be sure to store the unused screws and 
Table-Top Stand in a safe place until you 
are ready to attach the Table-Top Stand. 
Keep the screws away from small 
children.
~
Read the supplied Safety Booklet for 
additional safety information.
8-12 mm
Screw 
(supplied with the 
Wall-mount bracket)
Mounting Hook
Hook attachment on rear of 
TV set