Sony Clie Peg Nx80v Instructions Manual

							121
Performing the HotSync® operation via a network
Exchanging and updating files/data using the HotSync® 
operation (Other HotSync® operations)
6Place your CLIÉ handheld in the cradle and press the 
HotSync  button.
The computer information (Primary PC name and Primary PC address (IP 
address)) is transferred to your CLIÉ handheld. 
When you perform the HotSync
® operation via a network, your CLIÉ 
handheld identifies the computer based on the information transferred.
Preparing your CLIÉ handheld
Follow the steps below to set up your CLIÉ handheld for the HotSync® 
operation via a network.
1Rotate the Jog Dial™ navigator to select the HotSync icon 
on the Application Launcher screen and press the Jog Dial™ 
navigator.
The HotSync screen is displayed.
Tip
You can also tap the HotSync icon to display the HotSync screen.
2Tap Modem.
3Tap the Menu   icon.
The menu is displayed.
4Tap Modem Sync Prefs from the Options menu.
The Modem Sync Preferences screen is displayed.
Continued on next page
• • • • • • • • • • • • • • • • • • • 
						

							122
Performing the HotSync® operation via a network
Exchanging and updating files/data using the HotSync® 
operation (Other HotSync® operations)
5Tap Network.
6Tap OK.
The HotSync screen is displayed.
7Tap Select Service beneath the icon.
The Network Preferences screen is displayed.
8Tap the arrow V next to Service and select Unix or 
Windows RAS from the drop-down list.
b
For details, refer to “Changing the Network preferences” on page 92 and contact 
the administrator of the remote access server.
9Tap Done.
10Tap the Enter phone # field.
The Phone Setup dialog box is displayed.
11Adjust the settings on the screen as needed.
12Tap OK. 
The HotSync screen is displayed.
13Follow “Performing the HotSync® operation via a modem” on 
page 114 to select files/data to be synchronized. 
						

							123
Performing the HotSync® operation via a network
Exchanging and updating files/data using the HotSync® 
operation (Other HotSync® operations)
Performing the HotSync® operation via a network
You can perform the HotSync® operation via a network when you have 
prepared your computer settings, CLIÉ handheld settings, and Conduit Setup. 
1Rotate the Jog Dial™ navigator to select the HotSync icon 
on the Application Launcher screen and press the Jog Dial™ 
navigator.
The HotSync screen is displayed.
Tip
You can also tap the HotSync icon to display the HotSync screen.
2Tap the HotSync   icon.
The HotSync® operation starts.
A message will be displayed when the HotSync® operation is complete. 
						

							124Exchanging and updating files/data using the HotSync® 
operation (Other HotSync® operations)
Performing the HotSync® operation via LAN 
(LANSync)
You can perform the HotSync® operation via LAN between your computer and 
another computer connected to your CLIÉ handheld.
Prior to performing a LANSync operation
Check the following items:
 The Palm™ Desktop for CLIÉ software is installed in both computers 
connected by the LAN.
 Your CLIÉ handheld is placed in the cradle connected to the HotSync cable 
correctly and the cradle is connected to the computer properly.
Preparing your computer
1Click the HotSync   icon in the Windows task tray (at the 
bottom right of the taskbar) and select Network from the 
shortcut menu.
2Click the HotSync   icon in the Windows task tray (at the 
bottom right of the taskbar) once again and select Setup 
from the shortcut menu.
The Setup dialog box is displayed.
3Click the Network tab.
4Click the check box next to the user name for HotSync.
5Click OK.
To operate LANSync, you must have network manager skills. Consult a 
network manager prior to setting LANSync.
LANSync via LAN
LAN
Your computer
Continued on next page
• • • • • • • • • • • • • • • • • • • 
						

							125
Performing the HotSync® operation via LAN (LANSync)
Exchanging and updating files/data using the HotSync® 
operation (Other HotSync® operations)
6Place your CLIÉ handheld in the cradle and press the 
HotSync  button.
The computer information (Primary PC name and Primary PC address (IP 
address)) is transferred to your CLIÉ handheld. 
When you perform the HotSync
® operation via LAN, your CLIÉ 
handheld identifies the computer based on the information transferred.
Preparing your CLIÉ handheld
Follow the steps below to set up your CLIÉ handheld for the HotSync® 
operation via the LAN.
1Rotate the Jog Dial™ navigator to select the HotSync icon 
on the Application Launcher screen and press the Jog Dial™ 
navigator.
The HotSync screen is displayed.
Tip
You can also tap the HotSync icon to display the HotSync screen.
2Tap Local.
3Tap the Menu   icon.
The menu is displayed.
4Tap LANSync Prefs in the Options menu.
The LANSync Preferences screen is displayed.
5Tap LANSync.
Continued on next page
• • • • • • • • • • • • • • • • • • • 
						

							126
Performing the HotSync® operation via LAN (LANSync)
Exchanging and updating files/data using the HotSync® 
operation (Other HotSync® operations)
6Tap OK.
The HotSync screen is displayed again.
Performing a LANSync operation
You can perform a LANSync operation when you have prepared your 
computer settings, CLIÉ handheld settings, and Conduit Setup. Turn on the 
computers and start the HotSync
® Manager.
Note
To perform a LANSync operation, both computers connected to the cradle and 
performing the HotSync® are required to be set for LANSync. On each computer, click 
the HotSync   icon in the Windows task tray (at the bottom right of the taskbar) and 
make sure that Network in the shortcut menu is selected. If not, click Network to select 
it.
1Rotate the Jog Dial™ navigator to select the HotSync icon 
on the Application Launcher screen and press the Jog Dial™ 
navigator.
The HotSync screen is displayed.
Tip
You can also tap the HotSync icon to display the HotSync screen.
2Tap the HotSync   icon.
The HotSync® operation starts. 
A message will be displayed when the HotSync® operation is complete. 
						

							Using storage media 
such as “Memory 
Stick™” media
This chapter explains how to communicate with another 
Palm OS® PDA device via storage media such as “Memory 
Stick” media, how to handle “Memory Stick” media, and how 
to use  CLIE Files  for managing the files/data on storage 
media.
Using storage media such as “Memory Stick™”  media  . . . . . . . . . . . . . . . . . . . . . . . . .   128
Exchanging files/data via storage media . . . . .   136 
						

							Using storage media such as “Memory Stick™” media128
Using storage media such as “Memory 
Stick™” media
The type of storage media you can use with your CLIÉ handheld
You can use your CLIÉ handheld with storage media, such as “Memory Stick” 
media or CompactFlash compatible memory card (referred to as CF memory 
card). “Memory Stick” media or CF memory card is specially designed for 
exchanging and sharing files/data among “Memory Stick” media or CF memory 
card compatible products. Because it is removable, storage media can also be 
used for external files/data storage.
Storage media enables you to exchange files/data between your CLIÉ handheld 
and a computer. To exchange files/data via storage media, your CLIÉ handheld 
uses the supplied CLIE Files.
Using “Memory Stick” media
There are two types of “Memory Stick” media:
 “MagicGate Memory Stick” media, which is equipped with “MagicGate*” 
copyright protection technology.
 “Memory Stick” media, which is not equipped with “MagicGate” copyright 
protection technology.
You can use both types of “Memory Stick” media with your CLIÉ handheld. 
However, to play music files of ATRAC3 format, make sure that you use 
“MagicGate Memory Stick” media.
*What is MagicGate?
MagicGate is the copyright protection technology that is used for “MagicGate Memory 
Stick” media or MagicGate compatible devices such as a CLIÉ handheld. MagicGate 
certifies the compatible device and “MagicGate Memory Stick” media as copyright-
protection-compatible devices and encodes files/data to be played back on devices. 
Copyrighted files/data cannot be played back on a device not certificated.
“Memory Stick Duo,” “MagicGate Memory Stick Duo,” and “Memory Stick 
PRO”** can be used with your CLIÉ handheld.
** You can use the “Memory Stick PRO” MSX-1G, MSX-512, and MSX-256 with your 
CLIÉ handheld.
However, you cannot record or play back files/data that have been copyright 
protected with the MagicGate function.
bFor the latest information, refer to the URL shown on the last page of this manual.
Continued on next page
• • • • • • • • • • • • • • • • • • • 
						

							Using storage media such as “Memory Stick™” media129
Using storage media such as “Memory Stick™” media
Note on using “MagicGate Memory Stick” media
Do not handle copyright-protected files/data or directories stored on 
“MagicGate Memory Stick” media with CLIE Files or Windows® Explorer, 
otherwise the files/data may be disabled. To handle copyright-protected files/
data, use a “MagicGate” compliant application such as the SonicStage software.
Notes
If you use a “Memory Stick Duo” with your CLIÉ handheld
 Make sure you use a “Memory Stick Duo” adapter.
 Make sure you insert a “Memory Stick Duo” into the “Memory Stick Duo” 
adapter in the right direction.
 Make sure you insert a “Memory Stick Duo” into the adapter before you 
insert the adapter into the “Memory Stick” slot of your CLIÉ handheld.
 Make sure you insert a “Memory Stick Duo” adapter into the “Memory 
Stick” slot of your CLIÉ handheld in the right direction.
Notes on using “Memory Stick” media
When you use “Memory Stick” media, follow the precautions below.
 Avoid touching the terminals of “Memory Stick” media with your fingers or 
a metal object.
 Do not drop, bend, or expose “Memory Stick” media to external shock.
 Do not disassemble or modify “Memory Stick” media.
 Avoid getting liquid on “Memory Stick” media.
 Avoid using or storing “Memory Stick” media in a location subject to:
– extremely high temperature such as inside a hot car, outdoors in direct 
sunlight, or near a heater
– direct sunlight – high humidity
– corrosive substances – excessive dust
– magnetic fields
 When storing and carrying “Memory Stick” media, keep it in its original case 
to ensure protection of important files/data.
 Make a backup of important files/data.
 Avoid removing “Memory Stick” media from the insertion slot while files/
data is being written or read.
 To avoid damaging or erasing files/data, do not
– pull out “Memory Stick” media or unplug the AC power adapter while 
formatting, or reading or writing files/data.
– use “Memory Stick” media in a location subject to static electricity or 
electrical interference.
Continued on next page
• • • • • • • • • • • • • • • • • • • 
						

							Using storage media such as “Memory Stick™” media130
Using storage media such as “Memory Stick™” media
 If the battery power of your CLIÉ handheld is running low, an error message 
is displayed and you cannot exchange files/data with “Memory Stick” 
media. If this occurs, connect the AC power adapter or fully charge your 
CLIÉ handheld.
Use CLIE Files to format the “Memory Stick” media you use in your CLIÉ 
handheld. If you format it using another application, further operation with 
your CLIÉ handheld is not guaranteed.
 If you insert “Memory Stick” media that has been formatted by another 
application, a message prompting you to reformat it is displayed. To use 
“Memory Stick” media in your CLIÉ handheld, follow the instructions to 
format it. Note, however, that all stored files/data will be erased.
 Make sure you stick a suitable label on the “Memory Stick” media.
Protecting the files/data on “Memory Stick” media
To prevent accidental erasure of important files/data, you can use the write 
protect tab on the “Memory Stick” media. 
Write enable position
Slide the tab to the left to select the write enable position. You can read and 
write files/data on the “Memory Stick” media.
Write protect position (LOCK)
Slide the tab to the right to select the write protect position. You can only read 
the files/data on the “Memory Stick” media. Select the write protect position 
when you insert “Memory Stick” media containing any important files/data 
that you do not want to accidentally delete or overwrite.
Tip
Shape or exact location of the tab may differ from the illustration.
LOCK
Back side
Write Enable 
PositionWrite Protect 
Position