Sony Dav Dz1000 Operating Instructions

							Advanced Settings and Adjustments
masterpage:Right
specdef v20070110 filename[I:\FM E_data\1011_DAV-
DZ1000_rev\2895978121\2895978121DAVDZ1000\gb11adv.fm]
 model name [DAV-DZ1000]
 [2-895-978-12(1)]
71GB
Changing the password
1Press   DISPLAY while the system is 
in stop mode.
The Control Menu display appears.
2Press X/x to select   
[PARENTAL CONTROL], then press 
.
The options for [PARENTAL CONTROL] 
appear.
3Press X/x to select [PASSWORD t], 
then press  .
The display for entering the password 
appears.
4Enter your 4-digit password using the 
number buttons, then press  .
5Enter a new 4-digit password using the 
number buttons, then press  .
6To confirm your password, re-enter it 
using the number buttons, then press 
.
If you make a mistake entering 
your password
Press C before you press   and input the 
correct number.Depending on the shape of the room, there will 
be some speakers you cannot install. For the 
better surround sound, it is recommended that 
first you decide the position of the speakers. 
1Press FUNCTION +/– repeatedly until 
“DVD” appears in the front panel 
display.
2Press   DISPLAY when the system is 
in stop mode.
The Control Menu display appears.
3Press X/x to select   [SPEAKER 
FORMATION], then press  .
4Press X/x to select [SPEAKER 
FORMATION], then press  .
The options for [SPEAKER 
FORMATION] appear.
Getting Optimal Surround 
Sound for a Room
(SPEAKER FORMATION)
AUTO CALIBRATION SPEAKER FORMATION
T       0 : 0 3 : 0 4 3 ( 
2 8 ) 1 ( 
4 4 )DVD VIDEO
SPEAKER FORMATION
SPEAKER FORMATION
STANDARD
continued
 
						

							masterpage:Left
specdef v20070110 filename[I:\FM E_data\1011_DAV-
DZ1000_rev\2895978121\2895978121DAVDZ1000\gb11adv.fm]
 model name [DAV-DZ1000]
 [2-895-978-12(1)]
72GB
5Press C/c to select a setting.
 [STANDARD]: when installing all the 
speakers normally.
Note When the wireless kit WAHT-SD1 (not 
supplied) is installed, [STANDARD 
(WIRELESS)] appears instead (except for 
Taiwan model).
 [NO CENTER]: when installing the front 
and surround speakers.
 [NO SURROUND]: when installing the 
center and front speakers.
 [FRONT ONLY]: when installing the 
front speakers. [ALL FRONT]: when installing all the 
speakers in front of the listening position.
 [ALL FRONT - NO CENTER]: when 
installing the front and surround speakers 
in front of the listening position.
 [SECOND ROOM]: when installing the 
front speakers in one room and surround 
speakers in another.
Note Speaker sound in the other room is the same as 
that of the front and surround speakers.
Tip When the wireless kit WAHT-SD1 (not 
supplied) is installed, [STANDARD (WIRED)] 
appears (except for Taiwan model).
 
						

							Advanced Settings and Adjustments
masterpage:Right
specdef v20070110 filename[I:\FM E_data\1011_DAV-
DZ1000_rev\2895978121\2895978121DAVDZ1000\gb11adv.fm]
 model name [DAV-DZ1000]
 [2-895-978-12(1)]
73GB
6Press .
The setting is made.
7Press X/x to select [YES] or [NO], then 
press .
 [YES]: continue with [AUTO 
CALIBRATION], see Step 4 of 
“Calibrating the Appropriate Settings 
Automatically” (page 73).
 [NO]: exit [SPEAKER FORMATION].
Note In order to enjoy the surround sound after you change 
the position of the speakers, it is recommended you 
set [SPEAKER FORMATION], and then set [AUTO 
CALIBRATION].
 To set [AUTO CALIBRATION], you need to 
connect the supplied calibration mic.
 The front panel display indicates the selected 
[SPEAKER FORMATION]. It does not indicate the 
speakers which output sound.
 When you change the [CONNECTION] setting in 
[SPEAKER SETUP], the [SPEAKER 
FORMATION] setting returns to [STANDARD].
D. C. A. C. (Digital Cinema Auto Calibration) 
can set the appropriate surround sound 
automatically.
Note Loud test sound is output when [AUTO 
CALIBRATION] starts. You cannot turn the volume 
down. Give consideration to children and neighbor.
1Press FUNCTION +/– repeatedly until 
“DVD” appears in the front panel 
display.
2Press   DISPLAY when the system is 
in stop mode.
The Control Menu display appears.
3Press X/x to select   [SPEAKER 
FORMATION], then press  .
4Press X/x to select [AUTO 
CALIBRATION], then press  .
The options for [AUTO CALIBRATION] 
appear.
Continue with AUTO CALIBRATION?
YES
SPEAKER FORMATION
NO
Calibrating the 
Appropriate Settings 
Automatically
(AUTO CALIBRATION)
AUTO CALIBRATION SPEAKER FORMATION
T       0 : 0 3 : 0 4 3 ( 
2 8 ) 1 ( 
4 4 )DVD VIDEO
SPEAKER FORMATION
Connect calibration mic. Start
measurement?
YES
AUTO CALIBRATION
NO
continued
 
						

							masterpage:Left
specdef v20070110 filename[I:\FM E_data\1011_DAV-
DZ1000_rev\2895978121\2895978121DAVDZ1000\gb11adv.fm]
 model name [DAV-DZ1000]
 [2-895-978-12(1)]
74GB
Connect the calibration mic to the A.CAL 
MIC jack on the front panel, and set it up at 
the ear level using a tripod, etc. (not 
supplied). The front of each speaker should 
face the calibration mic, and there should be 
no obstruction between the speakers and the 
calibration mic. Be quiet during the 
measurement.
5Press X/x to select [YES], then press 
.
Calibration starts.
Note Avoid being in the measurement area and 
making noise during the measurement (about 
one minute), to avoid measurement failure. 
During the measurement, test signals are output 
from the speakers.
 The environment of the room in which the 
system is installed may affect measurements.
 If an error message appears, follow the message, 
then select [YES].
An error message appears when:
– the calibration mic is not connected.
– front speakers are not correctly connected.
– surround speakers are not correctly 
connected.
– front and surround speakers are not correctly 
connected.
– subwoofer is not connected.
6Press C/X/x/c to select [YES] or [NO], 
then press  .
xThe measurement is OK.
Disconnect the calibration mic, then select 
[YES]. The result is implemented.
xThe measurement is not OK.
Follow the message, then select [YES] to 
retry.
Tip You can check the distance between the listening 
position and each speaker. See page 81.
AUDIO IN / MIC 1 /
A.CAL MIC
Calibration mic
Measuring. Please wait a moment.
FRONT L :
FRONT R :
CENTER  :
SUBWOOFER :
SURROUND L :
SURROUND R :
If OK, unplug calibration mic and select
“YES”.
YES
5.00m     0.0dB
5.00m     0.0dB
5.00m  + 1.0dB
5.00m  + 4.0dB
3.00m  
- 2.0dB
3.00m  - 2.0dB Measurement complete.
NO
Check speaker connection.
Retry?
YES
Measurement failure.
NO
 
						

							Advanced Settings and Adjustments
masterpage:Right
specdef v20070110 filename[I:\FM E_data\1011_DAV-
DZ1000_rev\2895978121\2895978121DAVDZ1000\gb11adv.fm]
 model name [DAV-DZ1000]
 [2-895-978-12(1)]
75GB
Note While the Auto Calibration function works:
– do not turn off the power.
– do not press any button.
– do not change the volume.
– do not change the function.
– do not change the disc.
– do not insert or eject a disc.
– do not disconnect the calibration mic.
By using the Setup Display, you can make 
various adjustments to items such as picture and 
sound.
For an overall list of Setup Display items, see 
page 103.
Displayed items vary depending on the country 
model.
Note Playback settings stored in the disc take priority over 
the Setup Display settings and not all the functions 
described may work.
1Press FUNCTION +/– repeatedly until 
“DVD” appears in the front panel 
display.
2Press   DISPLAY when the system is 
in stop mode.
The Control Menu display appears.
3Press X/x to select   [SETUP], 
then press  .
The options for [SETUP] appear.
4Press X/x to select [CUSTOM], then 
press .
The Setup Display appears.
Using the Setup Display
1 2 ( 
2 7 )
QUICK
QUICK
RESET
DVD VIDEO
BNR
T       0 : 0 0 : 0 21 8 ( 
3 4 )
CUSTOM
LANGUAGE SETUP
MENU:
AUDIO:
SUBTITLE:ORIGINAL
AUDIO FOLLOW OSD:ENGLISH
ENGLISH
continued
 
						

							masterpage:Left
specdef v20070110 filename[I:\FM E_data\1011_DAV-
DZ1000_rev\2895978121\2895978121DAVDZ1000\gb11adv.fm]
 model name [DAV-DZ1000]
 [2-895-978-12(1)]
76GB
5Press X/x to select the setup item from 
the displayed list: [LANGUAGE 
SETUP], [SCREEN SETUP], [CUSTOM 
SETUP], or [SPEAKER SETUP]. Then 
press .
The Setup item is selected.
Example: [SCREEN SETUP]
6Select an item using X/x, then press 
.
The options for the selected item appear.
Example: [TV TYPE]
7Select a setting using X/x, then press 
.
The setting is selected and setup is 
complete.
To reset all of the [SETUP] 
settings
1Select [RESET] in Step 4 and press  .
2Select [YES] using X/x.
You can also quit the process and return to the 
Control Menu display by selecting [NO] here.
3Press .
All the settings explained on pages 77 to 83 
return to the default settings. Do not press [/
1 while resetting the system as it takes a few 
seconds to complete.
Note When you turn the system on after resetting and no 
disc is in the unit, the guide message appears on the 
TV screen. To perform the Quick Setup (page 14), 
press  , to return to normal screen, press CLEAR.
SCREEN SETUP
TV TYPE:
SCREEN SAVER:16:9
ON
BACKGROUND:
4:3 OUTPUT:FULL JACKET PICTURE
Selected item
Setup items
SCREEN SETUP
TV TYPE:
SCREEN SAVER:16:916:9
4:3 LETTER BOX
4:3 PAN SCANBACKGROUND:4:3 OUTPUT:
Options
SCREEN SETUP
TV TYPE:
SCREEN SAVER:4:3 LETTER BOX
ON
BACKGROUND:
4:3 OUTPUT:FULL JACKET PICTURE
Selected setting
 
						

							Advanced Settings and Adjustments
masterpage:Right
specdef v20070110 filename[I:\FM E_data\1011_DAV-
DZ1000_rev\2895978121\2895978121DAVDZ1000\gb11adv.fm]
 model name [DAV-DZ1000]
 [2-895-978-12(1)]
77GB
[LANGUAGE SETUP] allows you to set 
various languages for the on-screen display or 
sound track.
Select [LANGUAGE SETUP] in the Setup 
Display. For details, see “Using the Setup 
Display” (page 75).
x[OSD] (On-Screen Display)
Switches the display language on the TV screen.
x[MENU] (DVD VIDEO only)
You can select the desired language for the 
disc’s menu.
x[AUDIO] (DVD VIDEO only)
Switches the language of the sound track.
When you select [ORIGINAL], the language 
given priority in the disc is selected.
x[SUBTITLE] (DVD VIDEO only)
Switches the language of the subtitle recorded 
on the DVD VIDEO.
When you select [AUDIO FOLLOW], the 
language for the subtitles changes according to 
the language you selected for the sound track.
Tip If you select [OTHERS t] in [MENU], [AUDIO], 
and [SUBTITLE], select and enter a language code 
from “Language Code List” (page 95) using the 
number buttons.
Note When you select a language in [MENU], [AUDIO], 
or [SUBTITLE] that is not recorded on the DVD 
VIDEO, one of the recorded languages will be 
automatically selected (depending on the disc, the 
language may not be selected automatically).
Choose settings according to the TV to be 
connected.
Select [SCREEN SETUP] in the Setup Display. 
For details, see “Using the Setup Display” 
(page 75).
The default settings are underlined.
x[TV TYPE]
Selects the aspect ratio of the connected TV (4:3 
standard or wide).
Setting the Display or 
Sound Track Language
[LANGUAGE SETUP]
LANGUAGE SETUP
OSD:
MENU:                          
AUDIO:
SUBTITLE:ENGLISH
ENGLISH
ORIGINAL
AUDIO FOLLOW
Settings for the Display
[SCREEN SETUP]
[16:9]Select this when you connect a 
wide-screen TV or a TV with a 
wide mode function.
[4:3 LETTER 
BOX]Select this when you connect a 4:3 
screen TV. Displays a wide picture 
with bands on the upper and lower 
portions of the TV screen.
[4:3 PAN SCAN]Select this when you connect a 4:3 
screen TV. Automatically displays 
the wide picture on the entire 
screen and cuts off the portions 
that do not fit.
SCREEN SETUP
TV TYPE:
YC
BCR/RGB (HDMI):16:9
YCBCRCOLOR SYSTEM (VIDEO CD): AUTO
ON
SCREEN SAVER:
BACKGROUND: JACKET PICTURE
FULL
4:3 OUTPUT:
[4:3 PAN SCAN] [4:3 LETTER BOX] [16:9]
continued
 
						

							masterpage:Left
specdef v20070110 filename[I:\FM E_data\1011_DAV-
DZ1000_rev\2895978121\2895978121DAVDZ1000\gb11adv.fm]
 model name [DAV-DZ1000]
 [2-895-978-12(1)]
78GB
Note Depending on the DVD, [4:3 LETTER BOX] may be 
selected automatically instead of [4:3 PAN SCAN] or 
vice versa.
x[YCBCR/RGB (HDMI)]
Selects the type of HDMI signal output from 
HDMI OUT jack.
Note If the playback picture becomes distorted, set 
[YCBCR] to [RGB].
 If the HDMI OUT jack is connected to equipment 
with a DVI jack, [RGB] signals will be automatically 
output even when you select [YC
BCR].
x[COLOR SYSTEM (VIDEO CD)] 
(Asian, Australian, and Middle Eastern 
models only)
Select the color system when you play a VIDEO 
CD.
Note You cannot change the color system of the disc itself.
 You can change the color system of this system 
according to the connected TV (page 13).
x[SCREEN SAVER]
The screen saver image appears when you leave 
the system in pause or stop mode for 15 
minutes, 
or when you play back a CD, DATA CD (MP3 
audio), or DATA DVD (MP3 audio) for more 
than 15 minutes. The screen saver will help 
prevent your display device from becoming 
damaged (ghosting). Press any button (e.g., 
H 
button) to cancel the screen saver.
x[BACKGROUND]
Selects the background color or picture on the 
TV screen in stop mode or while playing a CD, 
DATA CD (MP3 audio)
, or DATA DVD (MP3 
audio).
x[BLACK LEVEL]
(North American, Mexican, and Latin 
American models only)
Selects the black level (setup level) for the video 
signals output from the jacks other than 
COMPONENT VIDEO OUT/HDMI OUT.
x[BLACK LEVEL (COMPONENT OUT)]
(North American, Mexican, and Latin 
American models only)
Selects the black level (setup level) for the video 
signals output from the COMPONENT VIDEO 
OUT jacks.
You cannot select this and the setting is not 
effective when the system outputs progressive 
signal.
[YCBCR]Outputs YCBCR signals.
[RGB]Outputs RGB signals.
[AUTO]Outputs the video signal in the 
system of the disc, either PAL or 
NTSC. If your TV uses a DUAL 
system, select [AUTO].
[PAL]Changes the video signal of an 
NTSC disc and outputs it in the 
PAL system.
[NTSC]Changes the video signal of a PAL 
disc and outputs it in the NTSC 
system.
[ON]Turns on the screen saver.
[OFF]Turns off the screen saver.
[JACKET PICTURE]The jacket picture (still picture) 
appears, but only when the jacket 
picture is already recorded on the 
disc (CD-EXTRA, etc.). If the 
disc does not contain a jacket 
picture, the [GRAPHICS] picture 
appears.
[GRAPHICS]A preset picture stored in the 
system appears.
[BLUE]The background color is blue.
[BLACK]The background color is black.
[ON]Sets the black level of the output 
signal to the standard level.
[OFF]Lowers the standard black level. 
Use this when the picture becomes 
too white.
[OFF]Sets the black level of the output 
signal to the standard level.
[ON]Raise the standard black level. 
Use this when the picture becomes 
too black.
 
						

							Advanced Settings and Adjustments
masterpage:Right
specdef v20070110 filename[I:\FM E_data\1011_DAV-
DZ1000_rev\2895978121\2895978121DAVDZ1000\gb11adv.fm]
 model name [DAV-DZ1000]
 [2-895-978-12(1)]
79GB
x[4:3 OUTPUT]
This setting is effective only when you set [TV 
TYPE] in [SCREEN SETUP] to [16:9] 
(page 77). Adjust to watch 4:3 aspect ratio 
progressive signals. If you can change the aspect 
ratio on your progressive format (525p/625p) 
compatible TV, change the setting on your TV, 
not the system. Note that this setting is effective 
only for HDMI connection or progressive 
signals output from the COMPONENT VIDEO 
OUT jacks.
Note This setting is effective only when 
“PROGRESSIVE” is selected by using VIDEO 
FORMAT (page 21).
Use this to set up playback related and other 
settings.
Select [CUSTOM SETUP] in the Setup Display. 
For details, see “Using the Setup Display” 
(page 75).
The default settings are underlined.
x[HDMI CONTROL]
Switches the HDMI CONTROL function on or 
off. This function is available when you connect 
the system and TV with the HDMI cord. For 
details on this function, see the HDMI 
CONTROL Guide (supplied separately).
Note When you set to [ON] without the HDMI connection 
of the TV, [Please verify the HDMI connection] 
appears and you can not set to [ON].
x[STB SYNCHRO]
Switches the STB SYNCHRO function on or 
off. This function is available when you connect 
the system and TV with the HDMI cord and you 
set [HDMI CONTROL] to [ON]. For details on 
this function, see the HDMI CONTROL Guide 
(supplied separately).
[FULL]Select this when you can change 
the aspect ratio on your TV.
[NORMAL]Select this when you cannot 
change the aspect ratio on your 
TV. Shows a 16:9 aspect ratio 
signal with black bands on left and 
right sides of the image.
16:9 aspect ratio TV
Custom Settings
[CUSTOM SETUP]
[OFF]Sets the HDMI CONTROL 
function to off.
[ON]Sets the HDMI CONTROL 
function to on.
You can operate mutually 
between components that are 
connected with the HDMI cord.
[OFF]Sets the STB SYNCHRO function 
to off.
MULTI-DISC RESUME:
CUSTOM SETUP
AUTO
PAUSE MODE:OFF
HDMI CONTROL:
OFF
STB SYNCHRO:
OFF
TRACK SELECTION:
ON
AUDIO DRC:OFF
AUDIO (HDMI):OFF
DivX:Registration Code    
continued
 
						

							masterpage:Left
specdef v20070110 filename[I:\FM E_data\1011_DAV-
DZ1000_rev\2895978121\2895978121DAVDZ1000\gb11adv.fm]
 model name [DAV-DZ1000]
 [2-895-978-12(1)]
80GB
Note This function is available only when you set [HDMI 
CONTROL] to [ON].
x[PAUSE MODE] (DVD VIDEO/DVD-R/
DVD-RW only)
Selects the picture in pause mode.
x[TRACK SELECTION] (DVD VIDEO only)
Gives the sound track which contains the highest 
number of channels priority when you play a 
DVD VIDEO on which multiple audio formats 
(PCM, DTS, MPEG audio, or Dolby Digital 
format) are recorded.
Note When you set the item to [AUTO], the language may 
change. The [TRACK SELECTION] setting has 
higher priority than the [AUDIO] settings in 
[LANGUAGE SETUP] (page 77). (Depending on 
the disc, this function may not work.)
 If PCM, DTS, Dolby Digital sound, and MPEG audio 
tracks have the same number of channels, the system 
selects PCM, DTS, Dolby Digital sound, and MPEG 
audio tracks in this order.
x[MULTI-DISC RESUME] (DVD VIDEO/
VIDEO CD only)
Switches the Multi-disc Resume setting on or 
off.
x[AUDIO DRC] (DVD VIDEO only)
Narrows the dynamic range of the sound track.
Useful for watching movies at low volume late 
at night.
x[AUDIO (HDMI)]
Selects the audio output status from the HDMI 
OUT jack.
Note When you connect the unit and TV with the HDMI 
cord and [ON] is selected, AUDIO DRC, A/V SYNC, 
DYNAMIC BASS, MOVIE/MUSIC, and sound field 
are not applied to the sound that is output from the 
TV.
x[DivX]
Displays the registration code for this system.
For more information, go to 
http://www.divx.com
 on the Internet.
[ON]Sets the STB SYNCHRO function 
to on.
[AUTO]The picture, including subjects 
that move dynamically, is output 
with no jitter. Normally select this 
position.
[FRAME]The picture, including subjects 
that do not move dynamically, is 
output in high resolution.
[OFF]No priority given.
[AUTO]Priority given.
[ON]Stores the resume settings in 
memory.
[OFF]Does not store the resume settings 
in memory. Playback restarts at 
the resume point only for the 
current disc in the unit.
[OFF]No compression of dynamic 
range.
[STANDARD]Reproduces the sound track with 
the kind of dynamic range that the 
recording engineer intended.
[MAX]Compresses dynamic range fully.
[OFF]The sound is not output from the 
HDMI OUT jack.
[ON]Outputs audio signals by 
converting Dolby Digital, DTS, or 
96 kHz/24 bit PCM signals to 48 
kHz/ 16 bit PCM.