Home > Sony > Camcorder > Sony Digital Camcorder DSR PD150 Operating Instructions

Sony Digital Camcorder DSR PD150 Operating Instructions

    Download as PDF Print this page Share this page

    Have a look at the manual Sony Digital Camcorder DSR PD150 Operating Instructions online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 980 Sony manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.

    							61
    Advanced Recording Operations
    Frame by frame recording – Cut recording
    You can make a recording with a stop-motion animated effect using cut recording. To
    create this effect, alternately move the subject a little and make a cut recording. We
    recommend that you use a tripod, and operate the camcorder using the Remote
    Commander after step 6.
    (1)Press MENU to display the menu in standby mode.
    (2)Turn the SEL/PUSH EXEC dial to select 
    , then press the dial.
    (3)Turn the SEL/PUSH EXEC dial to select FRAME REC, then press the dial.
    (4)Turn the SEL/PUSH EXEC dial to select ON, then press the dial.
    (5)Press MENU to erase the menu display.
    The FRAME REC indicator lights up.
    (6)Press START/STOP to start cut recording. The camcorder makes a recording
    for about six frames, and returns to recording standby.
    (7)Move the subject, and repeat step 6.
    To cancel the cut recording•Set FRAME REC to OFF in the menu settings.
    •Set the POWER switch to OFF (CHG), VCR, or MEMORY.
    Notes on cut recording
    •The last recorded cut is longer than other cuts.
    •The proper remaining tape time is not indicated if you use this function continuously.
    •You cannot mark an index during cut recording.
    16,7
    5
    POWER
    OFF
    (CHG)CAMERA
    MEMORY
    VCR
    FRAME  REC
    CAMERA  SET
    D  ZOOM
    16 : 9W I DE
    STEADYSHOT
    FRAME  REC
     I NT. REC
    W I ND
     [
    MENU]
     :
     END
    CAMERA  SET
    D  ZOOM
    16 : 9W I DE
    STEADYSHOT
    FRAME  REC
     I NT. REC
    W I ND
       RETURNOFF
    ON
     [
    MENU]
     :
     END
    CAMERA  SET
    D  ZOOM
    16 : 9W I DE
    STEADYSHOT
    FRAME  REC
     I NT. REC
    W I ND
       RETURNON
     [
    MENU]
     :
     END
    2-4
    MENU
    MENU 
    						
    							62
    Superimposing the date and time on a
    picture
    You can superimpose the date/time indication directly on the picture, besides the date/
    time display as data code.
    (1)Press MENU to display the menu in standby mode.
    (2)Turn the SEL/PUSH EXEC dial to select 
    , then press the dial.
    (3)Turn the SEL/PUSH EXEC dial to select DATE REC, then press the dial.
    (4)Turn the SEL/PUSH EXEC dial to select ON, then press the dial.
    (5)Press MENU to erase the menu display.
    The date/time indicator displayed on the LCD screen or in the viewfinder.
    To cancel superimposing the date/time indicationSelect OFF in step 4, then press the SEL/PUSH EXEC dial.
    Note
    You cannot erase the recorded date/time data on the picture. Before using this function,
    make sure that you set the date and time correctly.
    1,5
    OTHERS
    WORLD  T I ME
    BEEP
    COMMANDER
    D
     I SPLAY
    DATE  REC
    REC  LAMP
    COLOR  BAR
    HRS  METER
     [
    MENU]
     :
     END
    OTHERS
    WORLD  T I ME
    BEEP
    COMMANDER
    D
     I SPLAY
    DATE  REC
    REC  LAMP
    COLOR  BAR
    HRS  METER
       RETURNOFF
    ON
     [
    MENU]
     :
     END
    OTHERS
    WORLD  T I ME
    BEEP
    COMMANDER
    D
     I SPLAY
    DATE  REC
    REC  LAMP
    COLOR  BAR
    HRS  METER
       RETURNON
     [
    MENU]
     :
     END
    2-4MENU 
    						
    							63
    Advanced Recording Operations
    Marking an Index
    If you mark an index at the scene you want to search for, you can easily search for the
    scene later (p. 64).
    In recording mode [a]:
    Press INDEX MARK.
    The “INDEX MARK” indicator appears on the LCD screen or in the viewfinder for
    seven seconds and the index is marked after the indicator disappears.
    In standby mode [b]:
    Press INDEX MARK.
    The “INDEX STBY” indicator appears on the LCD screen or in the viewfinder. And
    when you press START/STOP to start recording, the “INDEX STBY” indicator changes
    to “INDEX MARK” and after the indicator disappears, the index marking is complete.
    The camcorder starts index-marking at the 11th frame from the recording start point.
    An index signal will be recorded on cassette memory about 0.3 sec, and on a tape about
    five seconds.
    You can mark an index in VCR mode (p. 82).
    To cancel index markingPress INDEX MARK again in standby mode.
    Notes on the index
    •Index marks are recorded during recording, you cannot mark an index after recording.•Index signals will be recorded both on the tape and on cassette memory. If you use
    cassettes without cassette memory or the cassette memory is full, the signals will be
    recorded only on the tape.
    •When you record over the recorded tape and mark an index on the tape, we
    recommend that you clear all data in the cassette memory before marking an index.
    STBY
    I NDEX
    STBY
    REC
    I NDEX
    MARKINDEX MARK
    REC
    I NDEX
    MARK
    [a] [b] 
    						
    							64
    — Advanced Playback Operations —
    Searching for a recording by index – Index search
    You can automatically search for the point where an index is marked and start playback
    from that point (Index search). Use a tape with cassette memory for convenience. Use
    the Remote Commander for this operation.
    Use this function to check where indexes are marked or to edit the tape at each
    sequence where the index is marked.
    Searching for the index point using cassette memory
    You can use this function only when playing back a tape with cassette memory (p. 142).
    (1)Set the POWER switch to VCR.
    (2)Set CM SEARCH in 
     to ON in the menu settings (p. 104). The default setting
    is ON.
    (3)Press SEARCH MODE on the Remote Commander repeatedly, until the index
    search indicator appears.
    The indicator changes as follows:
    INDEX SEARCH t TITLE SEARCH t DATE SEARCH t PHOTO SEARCH
    t PHOTO SCAN t no indicator
    (4)Press . or > on the Remote Commander to select the index point for
    playback.
    Your camcorder automatically starts playing back at the selected index point.
    To stop searchingPress x.
    3
    4 1POWER
    OFF
    (CHG)CAMERA
    MEMORY
    VCRSEARCH
    MODE
    INDEX  SEARCH
    1   SEP /   5 / 00
    2   SEP /   6 / 00
    3   DEC / 24 / 00
    4   JAN /   1 / 01
    5   FEB / 11 / 01
    6   APR / 29 / 015 : 30PM
    8 : 50AM
    10 : 30AM
    11 : 25PM
    4 : 11PM
    1 : 45PMCH
    CAM
    LINE
    CAM
    CAM
    CAM
    CAM
    5 : 30PM
    8 : 50AM
    10 : 30AM
    11 : 25PM
    4 : 11PM
    1 : 45PM
    INDEX  SEARCH
    1   SEP /   5 / 00
    2   SEP /   6 / 00
    3   DEC / 24 / 00
    4   JAN /   1 / 01
    5   FEB / 11 / 01
    6   APR / 29 / 01
    CH
    CAM
    LINE
    CAM
    CAM
    CAM
    CAM 
    						
    							65
    Advanced Playback Operations
    Searching for a recording by index – Index search
    In the  mark
    •The bar in the  mark indicates the present point on the tape.
    •The  mark in the  indicates the actual point you are trying to search for.
    If a tape has a blank portion between recorded portions
    The index search function may not work correctly.
    If you mark an index onto an external input signal
    “LINE” appears in the CH column.
    The index of the recording start point when recorded from external audio
    equipment
    The index mark is not recorded in cassette memory when recorded from external audio
    equipment. If you want to search for the index point, set CM SEARCH to OFF in the
    menu settings and search for the index point without cassette memory.
    Searching for the index point without using cassette memory
    (1)Set the POWER switch to VCR.
    (2)Set CM SEARCH in 
     to OFF in the menu settings (p. 104). If using a tape
    without cassette memory, skip this step.
    (3)Press SEARCH MODE on the Remote Commander repeatedly, until the index
    search indicator appears.
    The indicator changes as follows:
    INDEX SEARCH t DATE SEARCH t PHOTO SEARCH t PHOTO SCAN
    t no indicator
    (4)Press . on the Remote Commander to search for the previous index point
    or press  > on the Remote Commander to search for the next index point.
    Your camcorder automatically starts playback at the selected index point. Each
    time you press . or >, your camcorder searches for the previous or next
    index point.
    To stop searchingPress x. 
    						
    							66
    Searching the boundaries of recorded
    tape by title – Title search
    If you use a tape with cassette memory, you can search for the boundaries of
    recorded tape by title (Title search) (p. 142). Use the Remote Commander for
    this operation.
    (1)Set the POWER switch to VCR.
    (2)Set CM SEARCH in 
     to ON in the menu settings (p. 104). The default setting
    is ON.
    (3)Press SEARCH MODE on the Remote Commander repeatedly, until the title
    search indicator appears.
    The indicator changes as follows:
    INDEX SEARCH t TITLE SEARCH t DATE SEARCH t PHOTO SEARCH
    t PHOTO SCAN t no indicator
    (4)Press . or > on the Remote Commander to select the title for playback.
    Your camcorder automatically starts playback of the scene having the title that
    you selected.
    To stop searchingPress x.
    If you use a tape without cassette memory
    You cannot superimpose or search for a title.
    In the 
     mark
    •The bar in the  mark indicates the present point on the tape.
    •The  mark in the  indicates the actual point you are trying to search for.
    If a tape has a blank portion between recorded portions
    The title search function may not work correctly.
    3
    4 1POWER
    OFF
    (CHG)CAMERA
    MEMORY
    VCRSEARCH
    MODE
    TITLE  SEARCH
    1     SCENE1
    2     SCENE2
    3     SCENE3
    4     SCENE4
    5     SCENE5
    6     SCENE6
    TITLE  SEARCH
    3     SCENE3
    4     SCENE4
    5     SCENE5
    6     SCENE6
    7     SCENE7
    8     SCENE8 
    						
    							67
    Advanced Playback Operations
    Searching a recording by date
    – Date search
    You can automatically search for the point where the recording date changes and start
    playback from that point (Date search). Use a tape with cassette memory for
    convenience. Use the Remote Commander for this operation.
    Use this function to check where recording dates change or to edit the tape at each
    recording date.
    Searching for the date using cassette memory
    You can use this function only when playing back a tape with cassette memory (p. 142).
    (1)Set the POWER switch to VCR.
    (2)Set CM SEARCH in 
     to ON in the menu settings (p. 104). The default setting
    is ON.
    (3)Press SEARCH MODE on the Remote Commander repeatedly, until the date
    search indicator appears.
    The indicator changes as follows:
    INDEX SEARCH t TITLE SEARCH t DATE SEARCH t PHOTO SEARCH
    t PHOTO SCAN t no indicator
    (4)Press . or > on the Remote Commander to select the date for playback.
    Your camcorder automatically starts playback at the beginning of the selected
    date.
    To stop searchingPress x.
    3
    4 1POWER
    OFF
    (CHG)CAMERA
    MEMORY
    VCRSEARCH
    MODE
    DATE  SEARCH
    1   SEP /   5 / 00
    2   SEP /   6 / 00
    3   DEC / 24 / 00
    4   JAN /   1 / 01
    5   FEB / 11 / 01
    6   APR / 29 / 01
    DATE  SEARCH
    1   SEP /   5 / 00
    2   SEP /   6 / 00
    3   DEC / 24 / 00
    4   JAN /   1 / 01
    5   FEB / 11 / 01
    6   APR / 29 / 01 
    						
    							68
    Searching a recording by date – Date search
    Note
    If one day’s recording is less than two minutes, your camcorder may not accurately find
    the point where the recording date changes.
    In the 
     mark
    •The bar in the  mark indicates the present point on the tape.
    •The  mark in the  indicates the actual point you are trying to search.
    If a tape has a blank portion between recorded portions
    The date search function may not work correctly.
    Searching for the date without using cassette memory
    (1)Set the POWER switch to VCR.
    (2)Set CM SEARCH in 
     to OFF in the menu settings (p. 104). If using a tape
    without cassette memory, skip this step.
    (3)Press SEARCH MODE on the Remote Commander repeatedly, until the date
    search indicator appears.
    The indicator changes as follows:
    INDEX SEARCH t DATE SEARCH t PHOTO SEARCH t PHOTO SCAN
    t no indicator
    (4)Press . on the Remote Commander to search for the previous date or press
    > on the Remote Commander to search for the next date. Your camcorder
    automatically starts playback at the point where the date changes. Each time
    you press . or >, your camcorder searches for the previous or next date.
    To stop searchingPress x. 
    						
    							69
    Advanced Playback Operations
    Searching for a photo – Photo search/
    Photo scan
    You can search for a still picture you have recorded on a tape (photo search).
    You can also search for still pictures one after another and display each picture for five
    seconds automatically regardless of cassette memory (photo scan). Use the Remote
    Commander for these operations.
    Use this function to check or edit still pictures.
    Searching for a photo using cassette memory
    You can use this function only when playing back a tape with cassette memory (p. 142).
    (1)Set the POWER switch to VCR.
    (2)Set CM SEARCH in 
     to ON in the menu settings (p. 104). Default setting is
    ON.
    (3)Press SEARCH MODE on the Remote Commander repeatedly, until the photo
    search indicator appears.
    The indicator changes as follows:
    INDEX SEARCH t TITLE SEARCH t DATE SEARCH t PHOTO SEARCH
    t PHOTO SCAN t no indicator
    (4)Press . or > on the Remote Commander to select the date for playback.
    Your camcorder automatically starts playback of the photo having the date
    that you selected.
    To stop searchingPress x.
    In the  mark
    •The bar in the  mark indicates the present point on the tape.
    •The  mark in the  indicates the actual point you are trying to search for.
    If a tape has a blank portion between recorded portions
    The photo search function may not work correctly.
    3
    4 1POWER
    OFF
    (CHG)CAMERA
    MEMORY
    VCR
    PHOTO  SEARCH
    1   SEP /   5 / 00     5 : 30 PM
    2   SEP /   6 / 00     8 : 50 AM
    3   DEC / 24 / 00   1 0 : 30 AM
    4   JAN  /   1 / 01   11 : 25 PM
    5   FEB / 11 / 01     4 : 11 PM
    6   APR / 29 / 01     1 : 45 PM
    PHOTO  SEARCH
    1   SEP /   5 / 00     5 : 30 PM
    2   SEP /   6 / 00     8 : 50 AM
    3   DEC / 24 / 00   1 0 : 30 AM
    4   JAN  /   1 / 01   11 : 25 PM
    5   FEB / 11 / 01     4 : 11 PM
    6   APR / 29 / 01     1 : 45 PM
    SEARCH
    MODE 
    						
    							70
    Searching for a photo – Photo search/Photo scan
    Searching for a photo without using cassette memory
    (1)Set the POWER switch to VCR.
    (2)Set CM SEARCH in 
     to OFF in the menu settings (p. 104).
    (3)Press SEARCH MODE on the Remote Commander repeatedly, until the photo
    search indicator appears.
    The indicator changes as follows:
    INDEX SEARCH t DATE SEARCH t PHOTO SEARCH t PHOTO SCAN
    t no indicator
    (4)Press . or > on the Remote Commander to select a photo for playback.
    Each time you press . or >, your camcorder searches for the previous or
    next photo.
    Your camcorder automatically starts playback of the photo.
    To stop searchingPress x.
    Scanning photo
    (1)Set the POWER switch to VCR.
    (2)Press SEARCH MODE on the Remote Commander repeatedly, until the photo
    scan indicator appears.
    The indicator changes as follows:
    INDEX SEARCH t TITLE SEARCH t DATE SEARCH t PHOTO SEARCH
    t PHOTO SCAN t no indicator
    (3)Press . or > on the Remote Commander.
    Each photo is played back for about five seconds automatically.
    To stop scanningPress x.
    2
    3 1POWER
    OFF
    (CHG)CAMERA
    MEMORY
    VCRPHOTO  00
    SCANSEARCH
    MODE 
    						
    All Sony manuals Comments (0)

    Related Manuals for Sony Digital Camcorder DSR PD150 Operating Instructions