Sony Ericsson P800 User Guide

Getting to know your P80041This is the Internet version of the user’s guide. © Print only for private use. Device lockThe device lock protects your P800 and the data in it against 
unauthorized use. If the device lock is set to 
When SIM changed
, it 
means that normally the P800 is not locked. However, if the 
SIM is changed, the P800 asks you to enter the code to unlock 
the P800 before you can use it. Thus, if someone steals your 
P800 and puts another SIM card into it, they will not be able to 
use...

42PhoneThis is the Internet version of the user’s guide. © Print only for private use. TELEPHONYPhoneThe P800 is a full-featured mobile phone having full integration 
with the other functions of the device, including third party 
applications.
The phone includes useful features such as:
• Personalized ringtones.
• Picture Phone Book 
• Quick access back to the entry in Contacts, making it easy to 
try an alternative number or send an E-Mail if the contact is 
unavailable or busy.
• Voice dialing – make a...

Phone43This is the Internet version of the user’s guide. © Print only for private use. – Press and hold   to insert the international call 
prefix
+.
If a call is not successfully connected, the P800 can be set to 
automatically retry to connect the call. When a retry is 
successful, the P800 alerts you with a single ring signal.
To make an emergency call
• Enter the emergency number on the keypad and press the Jog 
Dial or press .
Usually, but not always, no SIM card or PIN code is required for...

44PhoneThis is the Internet version of the user’s guide. © Print only for private use. For more information, see “Voice control” on page 53.
To  e n d  a  c a l l
• Press  , or press the Jog Dial.
Short cuts 
• Press and hold   to dial your voice mail. With the flip 
open, select 
Phone > Call
 voice mail.
See “Voice mail” on page 56 on how to set up voice mail.
• Press and hold any of the keys from   to   to open 
your Contact list. Press again to reach the next letter. 
Additional key presses will add...

Phone45This is the Internet version of the user’s guide. © Print only for private use. •
Add to contacts
 – Create a new Contacts entry if the phone 
number of the active call is known, and not already stored in 
Contacts.
•
Show contact
 – Display the entry in Contacts, if any, that 
corresponds to the phone number of the active call.
•
Transfer sound
 – Transfer the call to a Bluetooth wireless 
technology headset.
•
Turn On/Off tones
 – You can send DTMF tones with the 
keypad, “Controlling tone based...

46PhoneThis is the Internet version of the user’s guide. © Print only for private use.  To make a call using 
Speed Dial
Speed Dial is a fast way to 
call one of your special 
speed dial numbers. See 
“Set-up speed dial 
numbers” on page 50. This 
is the default telephone 
view.
1. Select   on the button 
bar.
2. Use the Jog Dial or tap 
with the stylus to select 
an entry.
To make a call using the 
Call list
1. Select   from the button bar.
2. Scroll by rotating the Jog Dial and select an entry. You can...

Phone47This is the Internet version of the user’s guide. © Print only for private use. Incoming callsWhen you receive a call, if the calling party is found in contacts, 
the name of the caller will be displayed. If there is a picture it 
will also be shown in a small or large version. See “Incoming 
call picture” on page 53.
To handle an incoming call
Use the screen buttons to select what to do.
•
Answer
 – Answer the call.
•
Send Busy
 – Reject the call. The calling party will hear a busy 
tone and the...

48PhoneThis is the Internet version of the user’s guide. © Print only for private use. If someone calls when a call is on hold, you will be asked if you 
want to release the held call and answer the incoming call.
When an active call is ended, you are asked to retrieve the held 
call. If you do not respond within a few seconds, the held call 
will also be ended.
To make and handle a new call during a call
1. During a call, make a 
second call, or answer an 
incoming call. 
2. Press   to get a list of...

Phone49This is the Internet version of the user’s guide. © Print only for private use. To add a new conference party
1. During a conference call, tap   on the button bar and make 
a new call.
2. Select 
Join calls
.
To manage a conference call
• Use the screen buttons:
–
End conference
 – End the conference for all parties.
–
Hold conference
 – Put the conference on hold. The other 
parties can still talk to each other.
–
Show / Hide parties
 – Switch between the standard call 
control view and...

50PhoneThis is the Internet version of the user’s guide. © Print only for private use. Hints and smart functionsSpeakerphoneIf you open the flip during a call, the speaker phone function is 
activated and the volume will increase. This lets you continue 
the conversation while using other functions of the P800.
Close the flip or tap   to switch off the speakerphone.
Wa r n i n gThe volume may be uncomfortably loud at the higher 
volume levels if the phone is close to your ear. Exposure to 
excessive...