Sony F 35 User Manual

							71Menu List
  Chapter 4   Menu Configuration and Detailed Settings

Setting the monitor 
output07
(U06)COLORCOLORCOLOR, R, G, B
VF [SIG]VFDisplay only
[SRC]CAM, PB, AUTO, MIX
[MLUT]ON, OFF
SDI [SIG]MONIMONI, VF1, VF2
[SRC]CAM, PB, AUTO, MIXDisplay only (showing the 
settings on  
page)
[MLUT]ON, OFF
TEST [SIG]VBSVBS, VF2, REFTHRU, 
FRAME
[SRC]CAM, PB, AUTO, MIX, 
- - -Display only (showing the 
settings on  
page)
- - -: When REFTHRU or 
FRAME is selectec
[MLUT]ON, OFF, - - -
RM [SIG]VBSVBS, VF2
[SRC]CAM, PB, AUTO, MIXDisplay only (showing the 
settings on  
page)
[MLUT]ON, OFF

Setting the playback 
picture and monitor 
LUT08
(U07)MLUT/PB MIXOFFMLUT, PBMIX, OFF
MLUT SELNOT SELECTED709(800%), 
HG8009G40, 
HG8009G33, 
709(180%), 
User-defined, 
- - - , 
NOT SELECTED709: ITU-R709
HG: Hyper Gamma
User-defined: Name (max. 12 
characters) of the user 
MLUT read from a 
“Memory Stick” 
- - - : MLUT unusable
VF [CAM/PB]AU TOAUTO, CAM, PB, - - -- - - : When MLUT/PBMIX is 
set to PBMIX
(ON): When the PB picture is 
displayed on the 
respective output with 
MLUT/PBMIX set to MLUT
(OFF): When MLUT/PBMIX is 
set to OFF or PBMIX
[MLUT](OFF)OFF, ON, (ON), (OFF)
MONI [CAM/PB]AU TOAUTO, CAM, PB, - - -
[MLUT](OFF)OFF, ON, (ON), (OFF)
VBS [CAM/PB]AU TOAUTO, CAM, PB, - - -
[MLUT](OFF)OFF, ON, (ON), (OFF)
MLUT MARKONON, OFFTo turn the monitor LUT mark 
[LUT] on or off
LEVEL31, 2, 3, 4To set the luminance of the 
mark
H POS00 to 99To set the display position of 
the mark (0 for the leftmost or 
uppermost)
V POS00 to 99
OPERATION menu
Page title & 
purposeNo.ItemDefaultSettingsRemarks 
						

							72Menu List
  Chapter 4   Menu Configuration and Detailed Settings

Setting for mixing 
the playback picture09
(U08)MIX TYPEMIXMIX, WIPE
MIX
DIRECTIONCAMCAM, PB
MODEY- M I XY-MIX, WIRE(W), 
WIRE(B)
LEVEL80%0 to 80%
WIPE
L AYO U THORHOR, VERT
PB POSITIONHOR: RIGHT
VERT: BOTTOMHOR: RIGHT, LEFT
VERT: BOTTOM, TOP
BOUNDARYHOR: 960
VERT: 540HOR: 0 to 1920
VERT: 0 to 1080

Setting the step 
shutter values10
(U10)STEP[deg] column: Shutter angle 
value settings
[sec] column: The converted 
speed values depending 
on the selected FPS value 
are displayed.
1216.0360.0 to 4.3
2180.0360.0 to 4.3
3172.8360.0 to 4.3
4150.0360.0 to 4.3
5144.0360.0 to 4.3
690.0360.0 to 4.3
745.0360.0 to 4.3
822.5360.0 to 4.3
ADDExecute by ENTER.To add a step shutter value
DELExecute by ENTER.To delete a step shutter value
PRESETExecute by ENTER.To resume the factory- set 
step shutter settings
OPERATION menu
Page title & 
purposeNo.ItemDefaultSettingsRemarks 
						

							73Menu List
  Chapter 4   Menu Configuration and Detailed Settings

Registering the 
formats to be 
selected on the 
assistant panel11
(U11)FORMAT 
MEMORYRegister the formats to be 
selected on the subdisplay.
Select from among the 
formats displayed on the 
corresponding  subpage.
123.98P 444NO ASSIGN, 
23.98P 444, S23.98P 
444, 29.97P 444, 
S29.97P 444, S59.94P 
444, 23.98P 422, 
S23.98P 422, 29.97P 
422, S29.97P 422, 
S59.94P 422, 24P 444, 
S24P 444, 25P 444, 
S25P 444, S30P 444, 
S50P 444, S60P 444, 
24P 422, S24P 422, 
25P 422, S25P 422, 
S30P 422, 50P 422, 
S50P 422, S60P 422, 
50I 444, 50I 422, 59.94I 
444, 59.94I 422
2S23.97P 444Same as above
3S59.94P 422Same as above
423.98P 422Same as above
5NO ASSIGNSame as above
6NO ASSIGNSame as above
7NO ASSIGNSame as above
8NO ASSIGNSame as above

Setting the LOCK 
switch mode and 
subdisplay12
(U12)LOCK SW MODE
CAMERAFULLFULL, –RUNSet the mode of the LOCK 
switch on the camera.
–RUN: To enable the RUN 
button even when the 
LOCK switch is set to ON
PA N E LFULLFULL, –RUNSet the mode of the LOCK 
switch on the assistant panel.
–RUN: To enable the RUN 
button even when the 
LOCK switch is set to ON
PAGE SELECTExecute by ENTER.To jump to the subpage
OPERATION menu
Page title & 
purposeNo.ItemDefaultSettingsRemarks 
						

							74Menu List
  Chapter 4   Menu Configuration and Detailed Settings
 
subpage
Selecting pages to 
be displayed on the 
subdisplaySHUTTERONON, OFF
RAMPONON, OFF
FORMATONON, OFF
NDONON, OFF
GAIN/WHITE/
5600KONON, OFF
LENS FILEONON, OFF
TIME CODE/TAPE 
REMONON, OFF
VOLTAGE/FAN 
MODEONON, OFF
CHARACTER MIXONON, OFF
ASSIGNABLE 
SW1/SW2ONON, OFF
ASSIGNABLE 
SW3/SW4ONON, OFF
BRIGHTONON, OFF
GAMMA TABLEONON, OFF
COLOR SPACEONON, OFF
OPTICAL LEVELONON, OFF

Setting the 
functions of the 
assignable buttons 
and switch13
(U13)ASSIGN SW1OFFOFF, ND, REC REVIEW, 
PB(VF), VF MLUT, 
MONI MLUT, FAN 
MODE, GAIN –9/–18 dBSelect from among the 
functions displayed on the 
corresponding subpage.
ASSIGN SW2OFF
ASSIGN SW3OFF
ASSIGN SW4OFFOFF, AWB, BARS, 
TEST1
RE - ROTATIONSTDSTD, RVSSpecify operation mode of the 
MENU SEL/ENTER dial.
STD: Clockwise rotation 
advances the pointer/
cursor or increases values 
on the menu screen.
RVS: Counterclockwise 
rotation advances the 
pointer/cursor or increases 
values on the menu 
screen.

Specifying the gain 
switch settings14
(U14)GAIN[L] 0 dB–6, –3, 0, 3, 6, 9, 12 dBAssign the values for the gain 
switch of the RM-B150.
[M] 6 dB–6, –3, 0, 3, 6, 9, 12 dB
[H] 12 dB–6, –3, 0, 3, 6, 9, 12 dB
OPERATION menu
Page title & 
purposeNo.ItemDefaultSettingsRemarks 
						

							75Menu List
  Chapter 4   Menu Configuration and Detailed Settings

Confirming the 
operating power 
voltage15
(U15)DC IN (24V)
TYPEAC ADPBATT1, BATT2, AC ADP
NEAR END(22.2)Display only (Setting is 
achieved using the 
MAINTENANCE menu.)
END(21.6)Display only (Setting is 
achieved using the 
MAINTENANCE menu.)
DC IN (12 V)
TYPEAC ADPBATT1, BATT2, AC ADP
NEAR END(11.1)Display only (Setting is 
achieved using the 
MAINTENANCE menu.)
END(10.8)Display only (Setting is 
achieved using the 
MAINTENANCE menu.)

Operating the 
Operator file16
(U16)READ 
(MStCAM)Execute by ENTER.To read the operator file from 
a “Memory Stick”
WRITE 
(CAMtMS)Execute by ENTER.To write the current settings of 
the operator file items to a 
“Memory Stick”
PRESETExecute by ENTER.To set the operator file items 
to the preset values in internal 
memory
FILE IDalphanumerics (max.14 
characters)Enter a comment for the 
operator file to be written to a 
“Memory Stick.”
See “Specifying a character 
string” (page 66).
CAM CODECamera codeDisplay only
DATEDisplay only

Operating the lens 
files17
(U17)FILE11 to 32
No OffsetLens file nameDisplay only
CENTER 
MARKERTo set and store the center 
marker position:
H POS: Increasing the value 
moves it to the right.
V POS: Increasing the value 
moves it downwards.
Note
This item is not displayed in 
Cine mode.
H POS0–96 to 95
V POS0–54 to 53
STOREExecute by ENTER.
WHITE R/BONON, OFFTo turn the WHITE R/B 
compensation by the lens file 
on or off
OPERATION menu
Page title & 
purposeNo.ItemDefaultSettingsRemarks 
						

							76Menu List
  Chapter 4   Menu Configuration and Detailed Settings
1) The items to be displayed may vary depending on the connected lens 
control unit.

Showing the lens 
information18
(U18)NAMEWith an ARRI LDS lens: 
Response from the lens 
with respect to a SendTab 
commad (max. 16 
characters × 3 lines)
With Cooke /i lens: Owner 
Data (max. 16 characters  
× 1 line) + Lens Type (P or 
Z)
With a lens control unit 
connected: blank
SERIALWith an ARRI LDS lens: Serial 
number of the lens (hex.)
With Cooke /i lens: Serial 
number of the lens (9 
digits)
With a lens control unit 
connected: blank
FOCUSFocus setting:
With an ARRI LDS lens: 
0 to 1023
With Cooke /i lens: 000000 to 
999999
With a lens control unit 
connected: blank
IRISIris setting:
With an ARRI LDS lens: 
0 to 1023
With Cooke /i lens: T0 to 
T99999
With a lens control unit 
connected: F1.7 to F22, 
CL
1)
ZOOMZoom setting:
With an ARRI LDS lens: 
0 to 1023
With Cooke /i lens: 0 to 1023
With lens control unit 
connected: 0 to 99
1)
OPERATION menu
Page title & 
purposeNo.ItemDefaultSettingsRemarks 
						

							77Menu List
  Chapter 4   Menu Configuration and Detailed Settings
4-3-2 PAINT Menu
 When the setting is in the fixed status, it is displayed in parentheses.
Example: (OFF)
 The markings [P01] to [P03] in the No. column indicate the page numbers in Cine mode.
The pages marked with [ - - ] in the No. column are not displayed in Cine mode.
: Valid in Custom mode only (Switch settings, such as ON/OFF, are fixed to the default statuses in Cine mode.)
: Valid in both Cine and Custom modes
Execute by ENTER. : Execute by pushing on the MENU SEL/ENTER dial.
Notes
PA I N T  m e n u
Page title & 
purposeNo.ItemDefaultSettingsRemarks

Glancing and 
switching the paint 
functions on/offP01
[P01]FLARE (OFF) ON, OFF Fixed to OFF in Cine mode
GAMMA (ON) ON, OFF Fixed to ON in Cine mode
BLK GAM (OFF) ON, OFF Fixed to OFF in Cine mode
KNEE (OFF) ON, OFF Fixed to OFF in Cine mode
WHT CLIP (OFF) ON, OFF Fixed to OFF in Cine mode
DETAIL (OFF) ON, OFF Fixed to OFF in Cine mode
LVL DEP (OFF) ON, OFF Fixed to OFF in Cine mode
SKIN DTL (OFF) ON, OFF Fixed to OFF in Cine mode
MATRIX (OFF) ON, OFF Fixed to OFF in Cine mode
5600KOFFON, OFF

Adjusting the 
various video 
balanceP02
[ - - ] WHITE[R] [G] [B] [M]
000–99 to +99R, G, B, and M (master) 
values can be independently 
set.(M cannot be set for 
WHITE or FLARE.) BLACK 0 0 0 0–99 to +99
FLARE 0 0 0–99 to +99
GAMMA 0 0 0 0–99 to +99
FLARE OFF ON, OFF Fixed to OFF in Cine mode
TEST OFF OFF, TEST1, TEST2 
						

							78Menu List
  Chapter 4   Menu Configuration and Detailed Settings

Adjusting the 
gammaP03
[P02]
(U19)LEVEL[R] [G] [B] [M]
0000–99 to +99R, G, B, and M (master) 
values can be independently 
set.
BLACK 0–99 to +99 M (master) value only
COARSE 0.45 0.35 to 0.90 (0.05 steps) Fixed to 0.45 when HYPER 
GAMMA SPECIAL or USER 
is selected
TABLESPECIALSTANDARD, HYPER 
GAMMA, SPECIAL, USER
1STANDARD
1: CAMCORDER
2: 
× 4.5
3: 
× 3.5
4: SMPTE-240M
5: ITU-R709
6: 
× 5.0
HYPER GAMMA
1: HG3250G40
2: HG4600G33
3: HG3259G44
4: HG4609G36
5: HG8000G40
6: HG8000G33
7: HG8009G44
8: HG8009G36
SPECIAL
1: S-LOG A
USER
1: S-LOG A
2: S-LOG A
3: S-LOG A
4: S-LOG A
5: S-LOG A
For details, see “3-11 
Selecting the Gamma” (page 
58).
GAMMA ON ON, OFF Fixed to ON in Cine mode
KNEE (OFF) ON, OFF, (OFF) (OFF): Fixed to OFF with the 
gamma setting other than 
STANDARD
TESTOFFOFF, TEST1, TEST2

Adjusting the 
contrast near blackP04
[ - - ] LEVEL[R] [G] [B] [M]
0000–99 to +99R, G, B, and M (master) 
values can be independently 
set.
RANGE HIGH LOW, L.MID, H.MID, HIGH
OFF ON, OFF
TEST OFF OFF, TEST1, TEST2

Adjusting the color 
saturationP05
[ - - ]SATURATION 0–99 to +99
OFF ON, OFF
LOW KEY SAT 0–99 to +99
RANGE HIGH LOW, L.MID, H.MID, HIGH
OFF ON, OFF
TEST OFF OFF, TEST1, TEST2
PA I N T  m e n u
Page title & 
purposeNo.ItemDefaultSettingsRemarks 
						

							79Menu List
  Chapter 4   Menu Configuration and Detailed Settings

Adjusting the 
compression for 
high-luminance 
areasP06
[ - - ] K POINT[R] [G] [B] [M]
0000–99 to +99R, G, B, and M (master) 
values can be independently 
set.
K POINT: To adjust the point 
to apply the change
K SLOPE: To adjust the slope 
of compression
Absolute values are displayed 
in ABS mode except for M 
(master). K SLOPE 0 0 0 0–99 to +99
KNEE OFF ON, OFF
KNEE MAX OFF ON, OFF
KNEE SAT 0–99 to +99 To adjust the color saturation 
at high-luminance areas
OFF ON, OFF
AUTO KNEE OFF OFF, AUTO
POINT LIMIT 0–99 to +99 Absolute value is displayed in 
ABS mode.
SLOPE 0–99 to +99 Absolute value is displayed in 
ABS mode.
ABS Highlighted: ABS (Absolute) 
mode

Adjusting the level 
to white-clip the 
high-luminance 
areasP07
[ - - ] W CLIP[R] [G] [B] [M]
0000–99 to +99R, G, B, and M (master) 
values can be independently 
set.
Absolute values are displayed 
in ABS mode except for M 
(master).
OFF ON, OFF Fixed to OFF in Cine mode
ABS Highlighted: ABS (Absolute) 
mode

Adjusting the 
emphasis of the 
contours in videoP08
[ - - ]DETAIL OFF ON, OFF Fixed to OFF in Cine mode
LEVEL 0–99 to +99 Absolute value is displayed in 
ABS mode.
LIMITER [M] 0–99 to +99 To adjust the level to clip the 
maximum value of the 
emphasis signal
Absolute values are displayed 
in ABS mode except for M 
(master). [WHT] 0–99 to +99
[BLK] 0–99 to +99
CRISP 0–99 to +99 To adjust the level for noise 
suppression (Absolute values 
are displayed in ABS mode)
LV L  D E P 0–99 to +99 To adjust the emphasis 
elements suppressed by 
gamma (Absolute values are 
displayed in ABS mode.)
OFF ON, OFF
ABS Highlighted: ABS (Absolute) 
mode
PA I N T  m e n u
Page title & 
purposeNo.ItemDefaultSettingsRemarks 
						

							80Menu List
  Chapter 4   Menu Configuration and Detailed Settings

Adjusting the 
emphasis of the 
contours in videoP09
[ - - ]H/V RATIO 0–99  to  +99 To specify the vertical factor of 
the contour emphasis  
(Absolute values are 
displayed in ABS mode.)
FREQ 0–99 to +99 To adjust the video frequency 
components to be 
emphasized (Absolute values 
are displayed in ABS mode.)
MIX RATIO 0–99 to +99 Absolute value is displayed in 
ABS mode.
KNEE APT 0–99 to +99 For contour emphasis in high-
luminance areas compressed 
by the KNEE function 
(Absolute values are 
displayed in ABS mode.)
OFF ON, OFF
ABS Highlighted: ABS (Absolute) 
mode

Emphasizing the 
contours of the 
specific color 
componentsP10
[ - - ]SKIN DTL OFF ON, OFF Fixed to OFF in Cine mode
SKIN  GATE OFF OFF,  1,  2, 3 1, 2, 3: Skin gate can be set to 
ON for the specified 
channel only.
With the ON setting, a zebra 
pattern is displayed for the 
color component affected by 
the DETAIL function.
ABS Highlighted: ABS (Absolute) 
mode
CH SW[1] [2] [3]
(ON) OFF OFF ON, OFFThe skin tone detail function 
can be independently set for 
each channel (channel 1 is 
always ON).
HUE: For automatic detection 
of the target color
Absolute values are indicated 
for LEVEL only in ABS mode. HUE
EXEC EXEC EXECExecute by ENTER.
PHASE 0 0 0 0 to 359
WIDTH 29 29 29 0 to 90
SAT–89–89–89–99 to +99
LEVEL 0 0 0–99 to +99
PA I N T  m e n u
Page title & 
purposeNo.ItemDefaultSettingsRemarks