Sony Pmv F5 Manual

							Setup Menu List61
Settings
FlareSetting the flare 
correctionSetting
On / OffTurns the flare correction function on/off.
(This setting is available only when “Shooting Mode” in 
“Base Setting” of the System menu is set to “Custom,” and 
this setting is locked to “Off” when “Shooting Mode” is set to 
“Cine EI.”)
Master Flare
–99 to +99 (±0)Sets the user adjustment value for master flare of the flare 
correction that is caused by the camcorder.
R Flare
–99 to +99 (±0)Sets the user adjustment value for R flare of the flare 
correction that is caused by the camcorder.
G Flare
–99 to +99 (±0)Sets the user adjustment value for G flare of the flare 
correction that is caused by the camcorder.
B Flare
–99 to +99 (±0)Sets the user adjustment value for B flare of the flare 
correction that is caused by the camcorder.
GainSetting for the 
GainMode
ISO / dBSelects the gain setting mode.
(This setting is available only when “Shooting Mode” in 
“Base Setting” of the System menu is set to “Custom.”)
Gain

When “Mode” in “Gain” is set to 
“ISO,” and “Gamma Category” is 
set to “STD” or “HG (HG1/HG2/
HG3/HG4)”
ISO 800 to ISO 6400
When “Mode” in “Gain” is set to 
“ISO,” and “Gamma Category” is 
set to “HG (HG7/HG8)”
ISO 1600 to ISO 12500
When “Mode” in “Gain” is set to 
“ISO,” and “Gamma Category” is 
set to “S-Log2” or “S-Log3”
ISO 2000 to ISO 16000

When “Mode” in “Gain” is set to 
“ISO,” and “Gamma Category” is 
set to “STD” or “HG (HG1/HG2/
HG3/HG4)”
ISO 500 to ISO 4000
When “Mode” in “Gain” is set to 
“ISO,” and “Gamma Category” is 
set to “HG (HG7/HG8)”
ISO 1000 to ISO 8000
When “Mode” in “Gain” is set to 
“ISO,” and “Gamma Category” is 
set to “S-Log2” or “S-Log3”
ISO 1250 to ISO 10000
When “Mode” in “Gain” is set to 
“dB”
–3dB / 0dB / 3dB / 6dB / 9dB / 
12dB / 18dBSets the gain.
(This setting is available only when “Shooting Mode” in 
“Base Setting” of the System menu is set to “Custom.”)
When the CBK-55BK is attachedThe setting value that follows the position of the GAIN/EI 
switch on the CBK-55BK is displayed.
Camera
 Menu itemsSub items and setting valuesContents 
						

							Setup Menu List62
Settings
Exposure Index

500EI to 8000EI (2000EI)

320EI to 5000EI (1250EI)Sets the EI value.
(This setting is available only when “Shooting Mode” in 
“Base Setting” of the System menu is set to “Cine EI.”)
Note
The Highlight Latitude values for each EI value are follows:

500EI: 4.0E / 640EI: 4.3E / 800EI: 4.7E / 1000EI: 5.0E / 
1250EI: 5.3E / 1600EI: 5.7E / 2000EI: 6.0E / 2500EI: 6.3E 
/ 3200EI: 6.7E / 4000EI: 7.0E / 5000EI: 7.3E / 6400EI: 
7.7E / 8000EI: 8.0E

320EI: 4.0E / 400EI: 4.3E / 500EI: 4.7E / 640EI: 5.0E / 
800EI: 5.3E / 1000EI: 5.7E / 1250EI: 6.0E / 1600EI: 6.3E / 
2000EI: 6.7E / 2500EI: 7.0E / 3200EI: 7.3E / 4000EI: 7.7E 
/ 5000EI: 8.0E
When the CBK-55BK is attachedThe setting value that follows the position of the GAIN/EI 
switch on the CBK-55BK is displayed.
Highlight Latitude
4.0E to 8.0E (6.0E)Displays the Highlight Latitude value according to the 
“Exposure Index” setting.
Gain/EI Switch 
(Only when the CBK-55BK is 
attached)
See “Gain” or “Exposure Index” 
for the selectable items.
Default setting: Same value as 
the “Gain” setting for 
“Custom,” “800EI” for “Cine 
EI”Sets the L level of the GAIN/EI switch on the CBK-55BK.
Note
When “Shooting Mode” in “Base Setting” of the System 
menu is set to “Custom,” the selectable items are same as the 
selections in “Gain.” When “Shooting Mode” in “Base 
Setting” of the System menu is set to “Cine EI,” the selectable 
items are same as the selections in “Exposure Index.”
Gain/EI Switch 
(Only when the CBK-55BK is 
attached)
See “Gain” or “Exposure Index” 
for the selectable items.
Default setting: Double the 
value of the default setting of 
“Gain” for “Custom,” same 
value as the default setting of 
“Exposure Index” for “Cine EI”Sets the M level of the GAIN/EI switch on the CBK-55BK.
Note
When “Shooting Mode” in “Base Setting” of the System 
menu is set to “Custom,” the selectable items are same as 
them in “Gain.” When “Shooting Mode” in “Base Setting” of 
the System menu is set to “Cine EI,” the selectable items are 
same as them in “Exposure Index.”
Gain/EI Switch 
(Only when the CBK-55BK is 
attached)
See “Gain” or “Exposure Index” 
for the selectable items.
Default setting: Four times the 
value of the default setting of 
“Gain” for “Custom,” Double 
the value of the default setting 
of “Exposure Index” setting for 
“Cine EI”Sets the H level of the GAIN/EI switch on the CBK-55BK.
Note
When “Shooting Mode” in “Base Setting” of the System 
menu is set to “Custom,” the selectable items are same as 
them in “Gain.” When “Shooting Mode” in “Base Setting” of 
the System menu is set to “Cine EI,” the selectable items are 
same as them in “Exposure Index.”
Camera
 Menu itemsSub items and setting valuesContents 
						

							Setup Menu List63
Settings
Remote Gain L
–3dB / 0dB / 3dB / 6dB / 9dB / 
12dB / 18dBSets the gain switch L level for RM (such as RM-B150, etc.).
(This setting is available only when “Shooting Mode” in 
“Base Setting” of the System menu is set to “Custom.”)
Remote Gain M
–3dB / 0dB / 3dB / 6dB / 9dB / 
12dB / 18dBSets the gain switch M level for RM (such as RM-B150, etc.).
(This setting is available only when “Shooting Mode” in 
“Base Setting” of the System menu is set to “Custom.”)
Remote Gain H
–3dB / 0dB / 3dB / 6dB / 9dB / 
12dB / 18dBSets the gain switch H level for RM (such as RM-B150, etc.).
(This setting is available only when “Shooting Mode” in 
“Base Setting” of the System menu is set to “Custom.”)
Shockless Gain
On / OffTurns the shockless gain function on/off.
Camera
 Menu itemsSub items and setting valuesContents 
						

							Setup Menu List64
Settings
ShutterSpecifying 
operating 
conditions of the 
electronic shutterSetting
On / OffTurns the electronic shutter function on/off.When the CBK-55BK is attachedThe setting value that follows the position of the SHUTTER 
switch on the CBK-55BK is displayed.
Mode
Speed / AngleSelects modes of the electronic shutter.
Select
Step / ContinuousSelects the setting method for the electronic shutter speed.
Shutter Value Sets the shutter speed/angle.
Speed mode: Shutter speed
Angle mode: Shutter angle.
Setting value differs depending on the format setting and the 
“Select” setting in “Shutter.”
When “Mode” is set to “Speed”
When “Mode” is set to “Angle”
Step Select
Execute / CancelChanges the preset value for “Shutter Value” (8 types) of the 
“Step” setting in “Select.”
Add: Adds a step shutter value. When 8 steps are already 
registered, delete a step shutter value by using “Delete” to 
make the space for adding the new step shutter value.
Delete: Deletes a registered step shutter value.
Step 1~8: Displays a registered step shutter value.
Camera
 Menu itemsSub items and setting valuesContents
Format settingStepContinuous
59.94P 1/100 / 1/120 / 1/125 / 1/250 / 1/500 / 
1/1000 / 1/2000 / 1/40001/60 to 1/8000
59.94i 1/60 to 1/7000
50P
50i1/60 / 1/100 / 1/120 / 1/125 / 1/250 / 
1/500 / 1/1000 / 1/20001/50 to 1/7000
29.97P 1/50 / 1/60 / 1/120 / 1/125 / 1/250 / 
1/500 / 1/1000 / 1/20001/30 to 1/8000
25P 1/30 / 1/50 / 1/60 / 1/100 / 1/250 / 
1/500 / 1/1000 / 1/20001/25.02 to 1/7000
When “S&Q Motion” is set to “On”
1/30 to 1/7000
24P 1/48 / 1/50 / 1/60 / 1/120 / 1/250 / 
1/500 / 1/1000 / 1/20001/24.02 to 1/6000
When “S&Q Motion” is set to “On”
1/30.02 to 1/6000
23.98P 1/48 / 1/50 / 1/60 / 1/120 / 1/250 / 
1/500 / 1/1000 / 1/20001/23.99 to 1/6000
When “S&Q Motion” is set to “On”
1/30.03 to 1/6000
Format settingStepContinuous
59.94P
59.94i216.0 / 180.0 / 120.0 / 90.0 / 45.0 / 22.5 / 11.2 / 5.6359.7 to 4.2
50P
50i
300.0 / 180.0 / 150.0 / 90.0 / 45.0 / 22.5 / 11.2 / 5.6
29.97P216.0 / 180.0 / 120.0 / 90.0 / 45.0 / 22.5 / 11.2 / 5.625P300.0 / 180.0 / 150.0 / 90.0 / 45.0 / 22.5 / 11.2 / 5.624P
23.98P180.0 / 172.8 / 144.0 / 90.0 / 45.0 / 22.5 / 11.2 / 5.6 
						

							Setup Menu List65
Settings
Slow ShutterSetting the slow 
shutterSetting
On / OffTurns the slow shutter function on/off.
(You cannot change the on/off setting while recording.)
Number of Frames
 2 / 3 / 4 / 5 / 6 / 7 / 8Sets the number of frames to accumulate for the slow shutter.
Auto ExposureSetting the auto 
adjusting for the 
video level (This 
setting is available 
only for a lens that 
is compatible with 
the iris control 
function.)Level
+2.0 to –2.0 (±0)Sets the desired control level (bright/dark) for auto iris.
Speed
–99 to +99 (±0)Sets the control speed for auto iris.
Clip High light
On / OffTurns on/off the function that makes dull the response for 
high luminance by ignoring the detection of high luminance 
area.
Detect Window
1 to 6 (1)Selects the type of the detect window.
Detect Window Indication
On / OffTurns on/off the function that displays the frame of the detect 
window as a marker.
Camera
 Menu itemsSub items and setting valuesContents 
						

							Setup Menu List66
Settings
S&Q MotionSetting the Slow & 
Quick Motion 
functionSetting
On / OffTurns the Slow & Quick Motion function on/off.
This setting is not available when “Rec Format” of the System 
menu is set to the following settings.
 MPEG 1920 × 1080/1280 × 720
 SStP SR-SQ 444/422
 SStP SR-Lite 422
(This setting is not available when “Main Operation” in “Base 
Setting” of the System menu is set to “RGB.”
High Frame Rate Mode
Off / Full Scan / Center ScanSets the high speed shooting method more than 60P.
Off: High speed shooting is not performed.
Full Scan: Performs high speed shooting with the picture 
angle of Super 35 mm size.
Center Scan: Performs high speed shooting with half size of 
picture angle of Super 35 mm size on the center area of a 
picture.
Note
When “Imager Scan Mode” in “Base Setting” of the System 
menu is set to “2K Full,” this setting is locked to “Full Scan.” 
When “Imager Scan Mode” in “Base Setting” of the System 
menu is set to “2K Center,” this setting is locked to “Center 
Scan.”
Frame Rate
1 to 240 (24)Sets the frame rate for the Slow & Quick Motion recording.
Note
Available settings are follows.
When “High Frame Rate Mode” is set to “Off”
1 to 60 (24)When “High Frame Rate Mode” is set to “Full Scan” or 
“Center Scan”
 When “Main Operation” in “Base Setting” of the System 
menu is set to “RAW,” and “Rec Control” of the Recording 
menu is set to “AXS”
—72, 75, 80, 90, 96, 100, 110, 120, 125, 135, 144, 150, 
160, 168, 175, 180, 240
 When “Main Operation” in “Base Setting” of the System 
menu is set to “RAW,” and “Rec Control” of the Recording 
menu is set to “SxS&AXS”
—72, 75, 80, 90, 96, 100, 110, 120, 125, 135, 144, 150, 
160, 168, 175, 180 (system frequency: 23.98/24/29.97/
59.94)
—72, 75, 80, 90, 96, 100, 110, 120, 125, 135, 144, 150 
(system frequency: 25/50)
 When “Main Operation” in “Base Setting” of the System 
menu is set to “YPbPr”
—72, 75, 80, 90, 96, 100, 110, 120, 125, 135, 144, 150, 
160, 168, 175, 180 (system frequency: 23.98/24/29.97/
59.94)
—72, 75, 80, 90, 96, 100, 110, 120, 125, 135, 144, 150 
(system frequency: 25/50)
(This setting is not available when “Main Operation” in “Base 
Setting” of the System menu is set to “RGB.”
Camera
 Menu itemsSub items and setting valuesContents 
						

							Setup Menu List67
Settings
Color BarsSetting the Color 
BarsSetting
On / OffTurns the color bars on/off.
Type
ARIB / SMPTE / 75% / 100%Selects the type of color bar.
Noise 
Suppression
Setting the noise 
suppressionSetting
On / OffTurns the noise suppression function on/off.
(The default settings is “Off” when “Shooting Mode” in 
“Base Setting” of the System menu is set to “Cine EI.”)
Level
Low / Mid / HighSets the noise suppression level.
Flicker ReduceSetting Flicker 
CompensationMode
Auto / On / OffSet the operation of the Flicker-Reduction function.
Frequency
50 Hz / 60 HzSet to the power supply frequency of the light source causing 
flicker.
Image 
Inversion
Setting the image 
inversion functionSetting
Normal / V InvSets the image inversion.
Lens InterfaceSetting the lens 
interfaceSetting
Type C / Type A / Type C+12P / 
Type A+12P / OffSelects the lens interface according to the connected lens 
type.
When using an optional LA-FZB1/FZB2 mount adapter, 
select “Type C.”
When using the lens mount adapter with Lens 12 pin (service 
parts), select “Type C+12P” or “Type A+12P.”
Note
If changing this setting while the lens attached to the 
camcorder, turn the camcorder off, then turn it on.
Zoom Limit
Off / Zoom Range 1 / Zoom 
Range 2Sets the limit for the zoom operation range of the power 
zoom.
Camera
 Menu itemsSub items and setting valuesContents 
						

							Setup Menu List68
Settings
The Paint menu settings are available only when “Shooting Mode” in “Base Setting” (page 90) of the 
System menu is set to “Custom.”
Paint Menu
Paint
 Menu itemsSub items and setting valuesContents
GammaAdjusting the 
gamma 
compensationSetting
On / OffTurns the gamma compensation function on/off.
Step Gamma
0.35 to 0.90 (0.45)Sets the gamma compensation value in 0.05 steps.
Master Gamma
–99 to +99 (±0)Adjusts the master gamma level.
R Gamma
–99 to +99 (±0)Adjusts the R gamma level.
G Gamma
–99 to +99 (±0)Adjusts the G gamma level.
B Gamma
–99 to +99 (±0)Adjusts the B gamma level.
Gamma Category
STD / HG / User / S-Log2 / 
S-Log3Select from among “STD” (standard gamma), “HG” (hyper 
gamma), “User” (user gamma), “S-Log2,” or “S-Log3.”
Gamma Select
When “Gamma Category” is set to 
“STD”
STD1 DVW / STD2 ×4.5 / 
STD3 ×3.5 / STD4 240M / 
STD5 R709 / STD6 ×5.0
When “Gamma Category” is set to 
“HG”
HG1 3250G36 / HG2 4600G30 
/ HG3 3259G40 / HG4 
4609G33 / HG7 8009G40 / 
HG8 8009G33
When “Gamma Category” is set to 
“User”
User 1 / User 2 / User 3 / User 
4 / User 5
When “Gamma Category” is set to 
“S-Log2”
S-Log2
When “Gamma Category” is set to 
“S-Log3”
S-Log3Selects the gamma table that is used for the gamma 
compensation.
Black GammaAdjusting the 
black gamma 
compensationSetting
On / OffTurns the black gamma compensation function on/off.
(This setting is available only when “Gamma Category” in 
“Gamma” of the Paint menu is set to “STD.”)
Range
LOW / HIGHSelects the black gamma correction effective range.
LOW: 0 to 3.6%
HIGH: 0 to 28.8%
Master Black Gamma
–2 to +2 (±0)Sets the master black gamma level. 
						

							Setup Menu List69
Settings
KneeAdjusting the knee 
compensationSetting
On / OffTurns the knee compensation function on/off.
(This setting is available only when “Gamma Category” in 
“Gamma” is set to “STD.”)
Point
75% to 109% (90%)Sets the knee point.
Slope
–99 to +99 (±0)Sets the knee slope.
Knee Saturation
On / OffTurns the knee saturation function on/off.
Knee Saturation Level
–99 to +99 (±0)Adjusts the knee saturation level.
White ClipAdjusting the 
white clippingSetting
On / OffTurns the white clipping adjustment on or off.
(This setting is available only when “Gamma Category” in 
“Gamma” is set to “STD” or “HG.”)
Level
When the system frequency setting 
is 59.94, 29.97, or 23.98.
90.0% to 109.0% (108.0%)
When the system frequency setting 
is 50, 25, or 24.
90.0% to 109.0% (105.0%)Sets the white clip level.
Paint
 Menu itemsSub items and setting valuesContents 
						

							Setup Menu List70
Settings
DetailSetting the detail 
adjustingSetting
On / OffTurns the detail adjusting function on/off.
Level
–99 to +99 (±0)Adjusts the detail level.
H/V Ratio
–99 to +99 (±0)Adjusts the ratio between the H detail level and V detail level.
Crispening
–99 to +99 (±0)Adjusts the crispening level.
Level Depend
On / OffTurns the level depend adjustment function on/off.
Level Depend Level
–99 to +99 (±0)Adjusts the level depend level.
Frequency
–99 to +99 (±0)Sets the center frequency of the H details signal.
(Setting the center frequency higher decreases the details.)
Knee Aperture
On / OffTurns the knee aperture compensation function on/off.
Knee Aperture Level
–99 to +99 (±0)Adjusts the knee aperture level.
Limit
–99 to +99 (±0)Adjusts both the white and black detail limiter.
White Limit
–99 to +99 (±0)Adjusts the white detail limiter.
Black Limit
–99 to +99 (±0)Adjusts the black detail limiter.
V Black Limit
–99 to +99 (±0)Adjusts the black V detail limiter.
V Detail Creation
NAM / Y / G / G+RSelects the source signal to generate the V detail signal.
NAM: Highest level signal of V detail signal that is generated 
by R signal, G signal, or B signal.
Y: Y signal
G: G signal
G+R: Synthesized signal from G and R signal with a same 
ratio.
ApertureSetting the 
aperture 
compensationSetting
On / OffTurns the aperture compensation function on/off.
Level
–99 to +99 (±0)Adjusts the aperture level.
Paint
 Menu itemsSub items and setting valuesContents