Sony Projector MP-CL1 User Manual

							120
inches80
inches
40
inches
3.45 m
1.15 m
2.3 m
Help guide
MP-CL1
© 2015 Sony Corporation
3-MP0-107-01
MP-CL1 3-MP0-107-01              
						

							Parts and controls
CAUTION
Do not point the laser light directly at eyes or people, nor look into it. Doing so may 
cause serious injuries such as loss of eyesight.
Strap hole
Micro USB jack
Use an AC power adaptor with a 1.5 A or 
greater output to charge this product.

 (power) button
Press and hold the 
 (power) button for 
longer than 1 second to turn the power 
on or off.
MP-CL1 3-MP0-107-01  
						

							Jog lever (−/ENTER/+)
Press the jog lever while at the ENTER position to display the menu. Slide it to + 
or − to move to next or previous menu item, and then press while at the ENTER 
position to select the highlighted item.
 Speaker
 Built-in Wi-Fi antenna
 HDMI/MHL IN jack
 AUDIO OUT jack
Connect headphones or speakers to this jack.
 USB OUT jack (for power supply)
Connect another device to this jack to charge it. The 
 lamp lights up in green 
while charging the device.
 Ventilation holes

 (charge) lamp

 (power) lamp
 Lens
Laser radiates from this aperture.
MP-CL1 3-MP0-107-01  
						

							Adjusting the volume 
Slide the Jog Lever to + or − while the menu is not displayed to adjust the volume.
Checking the remaining battery power
Press and quickly release the  button (within 1 second). The  lamp blinks in 
orange, showing the battery status. The lamp blinks in one of the following patterns 
according to the remaining battery power.
(Once): 0% to 30% remaining
(Twice): 30% to 70% remaining
(Three times): 70% to 100% remaining
MP-CL1 3-MP0-107-01  
						

							Using the menu
Navigating the menu
Learn how to navigate through the menu here.
1 Press the jog lever while at the ENTER 
position.
The menu is projected.
2 Slide the jog lever to + or − to move to the next or previous menu item.
3 Press the jog lever while at the ENTER position with the desired menu 
item highlighted.
One of the following is displayed according to the selected menu item.
MP-CL1 3-MP0-107-01  
						

							Values to choose from
Slide the jog lever to + or − to move to the next or 
previous value, and then press the lever while at the 
ENTER position with the desired value highlighted.
Submenu
Slide the jog lever to + or − to move to the next or 
previous submenu item, and then press the lever 
while at the ENTER position with the desired item 
highlighted. The adjustment bar or another screen is 
displayed according to the selected item.
MP-CL1 3-MP0-107-01  
						

							Adjustment bar
Slide the jog lever to + or − to change the value 
shown in the bar, and then press the lever while at 
the ENTER position to confirm.
To exit the menu
Press and hold the jog lever for about 2 seconds while at the ENTER position.
MP-CL1 3-MP0-107-01  
						

							Description of the menu items
  CloseExits the menu.
 
  Input change Selects an input source from HDMI/MHL and screen mirroring 
according to the connection method.
 
 Keystone  
 Keystone   
Preset 1/  
Preset 2/  
OFF If the projected image is distorted and looks trapezoidal, select 
[
 Keystone Preset 1] or [ Keystone Preset 2] to apply the 
keystone adjustment. The default values of [
 Keystone Preset 2] 
is suitable for correcting distortion when using the 2 Way Stand 
(supplied). The preset values can be customized by changing the 
settings in [
 V keystone] and/or [ H keystone] below.
 
 V keystone Corrects vertical distortion. The 
value set here overwrites the 
selected preset value.
MP-CL1 3-MP0-107-01  
						

							  H keystone Corrects horizontal distortion. 
The value set here overwrites the 
selected preset value.
  
Flip (left-right) Flips the image horizontally. Use 
this mode for rear projection.
To flip the image back to normal, 
select this menu again.
  
Picture setting
 
  Contrast Adjusts the contrast of the projected image.
 
 Hue Adjusts the color tones.
 
 Saturation Adjusts the color intensity.
MP-CL1 3-MP0-107-01  
						

							  Setup 
 Device  name Displays the device name of this product. You can change the 
name (up to 15 characters) by selecting the name field and using 
the on-screen keyboard. Select [Save] to save the new name.
 
  Sleep timer Turns this product off automatically after a set length of time up 
to 150 minutes in increments of 30 minutes.
 
 Optical  alignment Adjusts the horizontal/vertical alignment of the color items. Try 
this if the projected image is unclear.
 
 Biphase  alignment Adjusts the synchronization timing of input signals. Try this if the 
projected image is flickering or blurred.
 
 Factory  reset Resets all setting values (except for the Optical and Biphase 
alignment settings) to the factory default.
MP-CL1 3-MP0-107-01