Starplus Triad-S 1/2/3 Single Line Telephone User Guide

							6Camp-On
Making an Unscreened Transfer
1. Briefly depress and release the hookswitch.
2. Dial desired intercom number.
3. Hang up to complete transfer.
PBX/Centrex Transfer
While connected to a PBX or Centrex CO Line:
1. Briefly depress and release the hookswitch. An 
intercom dial tone is heard.
2. Dial [660]. A Flash command is presented to the PBX or 
Centrex CO Line and a stutter tone is heard.
3. Dial desired telephone number.
4. Replace handset to complete transfer.
Calling Station Tone Mode
Allows a calling station to override a called key station’s “H” or 
“P” intercom switch settings.
When placing a call to a key station and tone ringing is desired:
1. Dial [6#].
2. Dial three-digit station extension (call tone rings 
station).
Camp-On
Placing a Camp-On
After receiving an intercom busy tone:
1. Briefly depress and release the hookswitch.
2. Dial [620]. When the called line is alerted, they can 
choose to pick-up your call, or remain on original call. 
						

							CO Line Queuing 7
Receiving a Camp-On
When a Camp-On warning tone is received through the 
handset while you are on a CO call, you can:
Hang up the present call, take the new call, or ignore 
the Camp-On signal.
CO Line Queuing
1. Dial outside line access code. You will receive a busy 
tone.
2. Briefly depress and release the hookswitch.
3. Dial [621]. A confirmation tone is heard.
Conference (CONF)
You may set up a conference with one external and one other 
internal station.
1. Lift the handset.
2. Place an outside call.
3. Briefly depress and release hookswitch to place call on 
hold.
4. Dial number of internal station you wish to add.
5. When that station answers, briefly depress and release 
hookswitch again. All three parties will be connected.
Also refer to the Conference w/Personal Park 
feature. 
						

							8Do Not Disturb (DND)
Conference w/Personal Park
While connected to an outside line:
1. Depress hookswitch momentarily. An intercom dial 
tone is heard.
2. Dial [438]. ( The first call is placed in Personal Park).
3. Dial desired number for second call.
4. Depress hookswitch momentarily. An intercom dial 
tone is heard.
5. Dial [664]. All three parties are conferenced.
6. Hang up to terminate conference.
Do Not Disturb (DND)
If you have been given the ability to place your phone in Do 
Not Disturb:
1. Lift the handset.
2. Dial [631].
3. Replace the handset.
To cancel Do Not Disturb:
1. Lift the handset.
2. Dial [631] or [662].
3. Replace the handset.
Hold - Exclusive
While connected to an outside line:
Briefly depress and release the hookswitch.
To retrieve the call:
Depress and release the hookswitch again. 
						

							Least Cost Routing 9
Least Cost Routing
LCR Operation and Queuing
To place an outside call when LCR has been enabled:
1. Lift the handset.
2. Dial [9].
3. Dial desired phone number (1 + area code + number).
4. Wait for answer.
LCR Queue Call Back
If an LCR Queue Call Back has been activated:
1. When telephone is signaled, answer the call. ( The 
designated phone number will automatically be 
redialed.)
2. Wait for answer. 
LCR Queue Cancel:
1. Lift the handset.
2. Dial the LCR Queue Cancel code [626].
3. Replace handset.
If the 911 feature is active, [800] is the LCR access 
code, instead of 9.
If all available lines  are busy, remain off-hook for 
four (4) seconds to automatically be queued onto 
LCR for an available line.
Only one LCR Queue Call Back request may be 
initiated by a station. When a second request is 
made, the first request will be canceled. 
						

							10 Meet Me Page
Meet Me Page
To request another party meet you on a page:
1. Dial the desired two or three-digit paging code,
2. Request that party meet you on the page.
3. Do not hang up; wait for the requested party to answer.
Answering a Meet Me Page
Go to the nearest telephone:
Dial [770]. You will be connected to the party that 
paged you.
Message Waiting (MSG)
Answering a Message Waiting
If your message waiting lamp is flashing, or there is an 
interrupted dial tone when you lift the handset:
1. Lift the handset.
2. Dial [663]. The station that left the message will ring.
Leaving a Message Waiting Indication
1. Lift the handset.
2. Dial desired intercom station. No Answer or DND tone 
is heard.
3. Briefly depress and release the hookswitch.
4. Dial [623].
5. Hang up. 
						

							Name in Display Programming 11
Name in Display Programming 
Every SLT extension has the capability to program the user’s 
name so that people using display telephones will see the 
name instead of the station number.
1. Lift the handset.
2. Dial [690].
3. Enter your name (up to 7 letters) using the codes as 
listed.
4. Press hookswitch to complete the programming 
process.
Other Codes
1 = 1# 8 = 8#“ = 01 * = *#
2 = 2# 9 = 9# , = 02 ( = #1
3 = 3# 0 = 0# ? = 03 ) = #2
4 = 4# Space = 11 / = 04 + = #3
5 = 5# : = 12 ! = *1 = = #4
6 = 6# - = 13 $ = *2 # = ##
7 = 7#‘ = 14 & = *4 . = 24 
						

							12 Off-Hook Preference
Off-Hook Preference
If your phone is programmed for Off-Hook Preference, you will 
hear outside line dial tone when lifting the handset.
When this operation is desired, you may not have access to all 
features contained in this User Guide. However, consult your 
Centrex or PBX User Guide for additional features you may 
have.
Paging
If you have been given the ability to make page 
announcements:
1. Lift the handset.
2. Dial desired paging code.
Also refer to PBX/Centrex Transfer feature in this User Guide 
for transferring instructions.
Page Zone Code
All Call - Internal and External 700
External All Call (All Zones) 76[O]
External Zones 1-2 76[P]
Internal Zones 1-8 701-708
Internal All Call 709 
						

							Personalized Messages 13
3. Speak in normal tone of voice to deliver message.
4. Replace handset to terminate the page announcement.
Personalized Messages
Each station can select a pre-assigned message to be displayed 
on the LCD of any Key Telephone calling that station.
To select one of the ten available messages:
1. Dial [633].
2. Dial the two-digit code for the message to display.
3. Hang up. (Activating DND cancels selected message.)
Stations off-hook or in DND will not hear the page 
announcement.
Code Message Code Message
01 On Vacation 06 On Trip
02 Return AM 07 In Meeting
03 Return PM 08 At Home
04 Return Tomorrow 09 On Break
05 Return Next Week 10 At Lunch
Use message code 00 to CLEAR messages. 
						

							14 Placing Calls
Placing Calls
Intercom Call
1. Lift the handset.
2. Dial three-digit intercom number.
Yo u  w i l l  h e a r :
†Ringing if called station is in “T” answering mode,
-or-
†Two bursts of tone if called station is in “H” or “P” 
mode.
3. Hang up to end the call.
Outside Call
1. Lift the handset.
2. Dial Line Group access code.
†9 = LCR Line Group 1
†800 = when E911 enabled
†801 to 807 = Line Groups
3. Dial telephone number.
Speed Dial
1. Lift the handset.
2. Dial [668].
3. Dial the desired speed number bin:
†000 to 019 = station speed numbers
†020 to 999 = system speed numbers
4. Replace the handset to end the call. 
						

							Universal Day/Night Answer 15
Storing Station Speed Numbers
CO Lines in Line Group 1 will be used for SLT Speed Dial.
1. Lift the handset.
2. Dial [661].
3. Dial desired speed number bin (000-019).
4. Dial telephone number you wish to store.
5. Briefly depress and release the hookswitch. A 
confirmation tone is heard.
Universal Day/Night Answer
When the system is in Day or Night mode and you hear an 
outside line ringing at another station and wish to answer it:
Dial [#5]. The connected outside line can be transferred 
or disconnected.