Stiga Shredder Bio-Master Bio-Max 8217-3029-01 Instructions Manual
Here you can view all the pages of manual Stiga Shredder Bio-Master Bio-Max 8217-3029-01 Instructions Manual. The Stiga manuals for Shredder are available online for free. You can easily download all the documents as PDF.
Page 1
DEUTSCHD 8217-3029-01Bio-Maste r Bio-Max
Page 2
3 SVENSKAS 3. 4. 2. 1. 4. 5.
Page 3
4 SVENSKA S 7. 9. 6.8. 10.
Page 4
5 SVENSKAS 14. 4. 13. 4. 15. 12.11 .
Page 5
6 ENGLISHGB SAFETY PRECAUTIONS This symbol means WARNING. Failure to follow the instructions carefully may lead to injury or damage. GENERAL • Study the warning stickers on the machine. Re- place any damaged or illegible warning stickers. Read the instructions carefully. Find out what the controls do and learn how to use the machine correctly. Never use the machine if there are people, espe- cially children, or animals nearby. Never let a child or adult use the machine if they are not fa- miliar with...
Page 6
7 ENGLISHGB ASSEMBLY LEGS 1. Turn the motor housing upside-down. Insert the screws into the machine from the bottom (fig. 1). 2. The right and left legs differ. Check that the legs are attached so that they are angled outwards (fig. 2). 3. Fix the legs to the machine using washers and nuts (fig. 3). Do not tighten the nuts yet. 4. The axle components are assembled for packing and transportation. Loosen the nuts, wheel bushings and two washers on each side. Insert the axle between the legs (fig. 4). 5....
Page 7
8 ENGLISHGB Replace the feed funnel and restart. NOTE! A safe- ty switch in the motor housing prevents the motor from starting if the feed funnel is not fitted correctly. STOPPING THE MOTOR Stop the motor by pressing the toggle switch to set- ting0(fig. 12). Do not feed in any material after the mo- tor has stopped. It will jam in the ma- chine and may prevent restarting. Unplug the machine before leaving it unattended. SHREDDING The following types of material can be shredded in the shredder: - twigs...
Page 8
9 ENGLISHGB REPLACING THE BLADES The blades of the shredder have two cutting edges, so they can be reversed. When both edges are worn the blades must be re- placed. Always replace with genuine replacement blades. Replace the blades as follows: 1. Switch off the motor and unplug the shredder. Wait until the blades have stopped. 2. Loosen the locking knob and remove the fun- nel. Always wear safety gloves when clean- ing or replacing the blade disc. 3. Loosen the screws with a screwdriver. There are holes...