Tascam CD-RW750 Quick Start Guide

							»    CD-RW750 —Quick Start Guide
Viewing CD TEXT
The CD-RW750 can display disc and track 
titles of finalized CDs that contain such infor-
mation.The way that titles are displayed is as follows:
Disc titles
These may be up to 23 characters long. When 
a disc is first loaded in the CD-RW750, the 
display first shows 
TOC Loading...
When the TOC (Table of Contents) has been 
read, the display shows the total running time 
of the disc. This is replaced by the first 12 
characters of the title after a few seconds. 
The title is shown for a few seconds and then 
the total disc running time is re-displayed.To show the whole of a disc title (if it is longer 
than 12 characters) or to toggle the display 
between the disc title and the running time, 
press the DISPLAY key while playback is 
stopped.
The title is shown, and if it is longer than 12 
characters, it is scrolled across the display.
Pressing 
DISPLAY again reverts to the disc 
running time.
Track titles
Track titles, like disc titles, may be up to 23 
characters long.
When playing back a track, the first 12 charac-
ters of a title are shown for a couple of sec-
onds, about three seconds into the track.
As well as allowing you to view the elapsed 
disc and track times, and the remaining disc and track times, the DISPLAY key can also be 
used to display the track titles on a finalized 
disc.
In this case, if a track title contains more than 
12 characters , the track title is scrolled across 
the display.
Entering CD TEXT
The CD-RW750 allows CD TEXT to be 
entered on unfinalized discs prior to finaliza-
tion. Note that not every player is capable of 
reading and displaying CD TEXT.
1With playback stopped, press the 
MENU key until the display shows:
2Press the MULTI JOG control.
3Press the MULTI JOG control to start 
entering the disc title (or editing it if it 
exists). See the next page for details of 
how to enter and edit title text.
CD TEXT?
T_EDIT>DISC?
D00808400A 
						

							2
Track titles
4Tu r n  t h e  MULTI JOG control. The dis-
play shows:
5Continue turning the MULTI JOG con-
trol (if necessary) until the number of  the track whose title is to be edited is 
shown.
6Press the MULTI JOG control to start 
entering the track title. If the track 
already has a title, this is shown and it 
may be edited. Otherwise enter the title 
text as described below.
All titles
7Press FINALIZE/YES to finish editing the 
current title. The display shows
followed by
followed by where XXX is the current track num-
ber (or 
DISC if the disc title has just 
been edited).
8Turn and press the MULTI JOG to select 
and edit further titles.
9When all titles have been edited, press 
STOP to end editing.
10Fina lize the disc (see the main manual). 
Discs which are not finalized and are 
then ejected (or ar e loaded and the 
power is then turned  off) will lose their 
titles.
Editing text
• Pushing the FADER/JOG MODE key tog-
gles between the character entry mode 
and the cursor movement mode.
 Character Entry:  When the underline 
cursor is flashing, turning the 
MULTI JOG 
control cycles through the alphanumeric 
characters available fo r titling. Push the 
MULTI JOG to confirm the character just 
entered. 
Cursor movement:  When the underline 
cursor is lit steadily, turning the 
MULTI 
JOG
 control moves the cursor left or 
right.
 Delete characters with the 
ERASE/DEL 
key.
 Change between uppercase (capital) let- ters and lowercase letters with the 
DISPLAY key (when you are inputting 
uppercase letters, the display shows 
CAPS).
T_EDIT>01Tr
Writing
Write
OK
T_EDIT>XXTr 
						

							3
Synchronized recording
Synchronized recording with the CD-RW750 
provides you with an easy way to record both 
analog and digital program material, starting 
tracks at the beginning of the material, and 
ending them automatically when it finishes.
Two synchronization modes are available: 
SYNC ALL, for repeated recording of many 
tracks one after the other, and 
SYNC 1, for 
recording one track only. The synchronization 
facility may also be turned off (
SYNC OFF).The steps necessary to record using this facil-
ity are as follows:
1With a recordable disc loaded, select 
the input source.
2Set the threshold level which allows 
triggering of the sync mode.
3Adjust the input level (if necessary).
4Select the sync mode and enter record 
ready mode.
5Start playback of the source.
Select the input source
Use the INPUT SELECT key to select the 
source.
The three choices available are:ANALOG
COAXIAL
and
OPTICAL
The appropriate indicator(s) on the display 
light.
Set the threshold
The threshold level is used to set the level at 
which synchronized recording starts and 
stops.1Press the MENU key until the display 
shows: 
S_LVL> -xxdB.
2Tu r n  t h e  MULTI JOG control to select the 
threshold level.
3Press the MENU key until you exit the 
menu system.
Adjust the input level
When adjusting input levels, always avoid the 
OVER meter indicator lighting. To adjust the 
level in stop mode, press the 
MONITOR key on 
the remote control unit.
Analog sources Adjust the concentric 
INPUT controls and set the menu Volume level to 
0 (see the digital source setting on the 
next page). 
						

							Digital sources Press the MENU key until 
the display shows  
Volume -xxdB.Tu rn th e 
MULTI JOG control to adjust the 
level.
Select the sync mode
For automatic recording select SYNC 1 or 
SYNC ALL.
1Press the SYNC REC key until the 
appropriate mode is shown on the dis-
play.
The meaning of the modes is given here.
Enter record ready
1Simply press the RECORD key and the 
unit enters record ready mode. 
Start playback of the source
Start playback of the source a little before 
where you want the recording to begin.The CD-RW750 enters record mode automati-
cally depending on the source type, as 
explained earlier, and stops recording auto-
matically, depending on the synchronization 
mode.
Start 
conditionsSYNC ALL SYNC 1
Digital (DAT) Track start signal is detected
Digital (CD and MD) Track start signal is detected 
and signal rises above trigger level
Other digital, and 
analogSignal rises above trigger level.
Stop conditions 
(all inputs)Level falls below trigger level for six 
seconds or moreLevel falls below trigger level for less than six 
seconds and then rises above trigger level or level 
falls below trigger for six seconds or more
TEAC CORPORATION Phone: +81-422-52-5082 www.tascam.com 
3-7-3, Nakacho, Musashino-shi, Tokyo 180-8550, Japan
Printed in China