Tascam Compact Disc Player CD-160MK2 Owners Manual

							
CD-160MK#
Compact Disc Player
D00945120A
»
OWNER'S MANUAL 
						

							
IMPORTANT SAFETY PRECAUTIONS
 TASCAM  CD-160MKll

The  exclamation  point  within  an  equilateral  triangle  is  intended  to  alert  the  user  to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
The  lightning  flash  with  arrowhead  symbol,  within  equilateral  triangle,  is  intended to  alert  the  user  to  the  presence  of  uninsulated  “dangerous  voltage”  within  the product’s  enclosure  that  may  be  of  sufficient  magnitude  to  constitute  a  risk  of electric shock to persons.
CAUTION:  TO  REDUCE  THE  RISK  OF  ELECTRIC  SHOCK,  DO  NOT  REMOVE  COVER  (OR  BACK).  NO  USER-SERVICEABLE  PARTS  INSIDE.  REFER  SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING: TO PREVENT FIRE OR SHOCK 
HAZARD, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
T h i s  a p p l i a n c e  h a s  a  s e r i a l  n u m b e r located  on  the  rear  panel.  Please  record the  model  number  and  serial  number  and retain them for your records.Model number
Serial number
In North America use only on 120V supply.
For the customers in Europe
WARNING
This is a Class A product. In a domestic environment, 
this  product  may  cause  radio  interference  in  which 
c a s e  t h e  u s e r  m a y  b e  re q u i re d  t o  t a k e  a d e q u a t e 
measures.
Pour les utilisateurs en Europe
AVERTISSEMENT
I l   s ' a g i t   d ' u n   p r o d u i t   d e   C l a s s e   A .   D a n s   u n 
e n v i r o n n e m e n t  d o m e s t i q u e ,  c e t  a p p a r e i l  p e u t 
p ro v o q u e r  d e s  i n t e r f é re n c e s  r a d i o ,  d a n s  c e  c a s 
l'utilisateur  peut  être  amené  à  prendre  des  mesures 
appropriées.
Für Kunden in Europa
Warnung
Dies  ist  eine  Einrichtung,  welche  die  Funk-Entstörung 
nach  Klasse  A  besitzt.  Diese  Einrichtung  kann  im 
Wo h n b e r e i c h  F u n k s t ö r u n g e n  v e r s u r s a c h e n ;  i n 
d i e s e m  F a l l  k a n n  v o m  B e t r i e b e r  v e r l a n g  w e rd e n , 
angemessene  Maßnahmen  durchzuführen  und  dafür 
aufzukommen.
CE Marking Information
a) Applicable electromagnetic environment: E4
b)  Peak inrush current: 0.6 A
TO THE USER
This equipment has been tested and found to comply 
with the limits for a Class A digital device, pursuant to 
Part  15  of  the  FCC  Rules.  These  limits  are  designed 
to  provide  reasonable  protection  against  harmful 
interference  when  the  equipment  is  operated  in  a 
commercial  environment.  This  equipment  generates, 
uses,  and  can  radiate  radio  frequency  energy  and, 
i f  n o t  i n s t a l l e d  a n d  u s e d  i n  a c c o rd a n c e  w i t h  t h e 
instruction manual, may cause harmful interference to 
radio communications.
Operation  of  this  equipment  in  a  residential  area  is 
likely  to  cause  harmful  interference  in  which  case  the 
user  will  be  required  to  correct  the  interference  at  his 
own expense.
CAUTION
C h a n g e s  o r  m o d i f i c a t i o n s  t o  t h i s  e q u i p m e n t  n o t 
expressly  approved  by  TEAC  CORPORATION  for 
compliance could void the user's authority to operate 
this equipment.
For U.S.A. 
						

							
IMPORTANT SAFETY INSTRUCTIONS
TASCAM  CD-160MKll 

Do not expose this apparatus to drips or splashes.
Do  not  place  any  objects  filled  with  liquids,  such  as 
vases, on the apparatus.
Do  not  install  this  apparatus  in  a  confined  space  such 
as a book case or similar unit.
The  apparatus  draws  nominal  non- operating  power 
from  the  AC  outlet  with  its  POWER  switch  in  the  off 
position.
The  apparatus  should  be  located  close  enough  to  the 
AC  outlet  so  that  you  can  easily  grasp  the  power  cord 
plug at any time.
An  apparatus  with  Class  I  construction  shall  be  con-
nected  to  an  AC  outlet  with  a  protective  grounding 
connection.
Batteries  ( batter y  pack  or  batteries  installed )  should 
not  be  exposed  to  excessive  heat  such  as  sunshine, 
fire or the like.
•
•
•
•
•
•
•
 1 Read these instructions.
 2 Keep these instructions.
 3 Heed all warnings.
 4 Follow all instructions.
 5 Do not use this apparatus near water.
 6 Clean only with dry cloth.
 7 D o  n o t  b l o c k  a n y  v e n t i l a t i o n  o p e n i n g s .  I n s t a l l  i n 
accordance with the manufacturer's instructions.
 8 D o   n o t   i n s t a l l   n e a r   a n y   h e a t   s o u r c e s   s u c h   a s 
radiators,  heat  registers,  stoves,  or  other  apparatus 
(including amplifiers) that produce heat.
 9 Do  not  defeat  the  safety  purpose  of  the  polarized  or 
grounding-type plug. A polarized plug has two blades 
with  one  wider  than  the  other.  A  grounding  type  plug 
has two blades and a third grounding prong. The wide 
blade or the third prong are provided for your safety. If 
the provided plug does not fit into your outlet, consult 
an electrician for replacement of the obsolete outlet.
 10 P r o t e c t  t h e  p o w e r  c o r d  f r o m  b e i n g  w a l k e d  o n 
o r  p i n c h e d  p a r t i c u l a r l y  a t  p l u g s ,  c o n v e n i e n c e 
receptacles,  and  the  point  where  they  exit  from  the 
apparatus.
 11 Only  use  attachments/accessories  specified  by  the 
manufacturer.
 12 Use  only  with  the  cart,  stand,  tripod,  bracket,  or 
table  specified  by  the  manufacturer,  or  sold  with  the 
apparatus.  When  a  cart  is  used,  use  caution  when 
moving the cart/apparatus combination to avoid injury 
from tip-over.
 13 Unplug  this  apparatus  during  lightning  storms  or 
when unused for long periods of time.
 14 Refer  all  servicing  to  qualified  service  personnel. 
Servicing  is  required  when  the  apparatus  has  been 
damaged  in  any  way,  such  as  power-supply  cord  or 
plug  is  damaged,  liquid  has  been  spilled  or  objects 
have  fallen  into  the  apparatus,  the  apparatus  has 
been  exposed  to  rain  or  moisture,  does  not  operate 
normally, or has been dropped. 
						

							
 TASCAM  CD-160MKll
 TASCAM  CD-XXX
T h i s  p r o d u c t  h a s  b e e n  d e s i g n e d  a n d  m a n u f a c t u r e d 
according  to  FDA  regulations  “title  21,  CFR,  chapter  1, 
subchapter  J,  based  on  the  Radiation  Control  for  Health 
and  Safety  Act  of  1968,”  and  is  classified  as  a  class  1 
laser product. There is no hazardous invisible laser radia-
tion  during  operation  because  invisible  laser  radiation 
emitted  inside  of  this  product  is  completely  confined  in 
the protective housings.
The label required in this regulation is shown at 1.
Optical pickup :
Type : KSS-213CL
Manufacturer  : SONY Corporation
Laser output  : 
Less than 0.4 mW on the objective 
lens
Wavelength  : 760 to 800 nm
CAUTION
DO  NOT  REMOVE  THE  PROTECTIVE  HOUSING 
USING A SCREWDRIVER.
U S E  O F  C O N T R O L S  O R  A D J U S T M E N T S  O R 
PERFORMANCE  OF  PROCEDURES  OTHER  THAN 
T H O S E  S P E C I F I E D  H E R E I N  M AY  R E S U LT  I N 
HAZARDOUS RADIATION EXPOSURE.
I F   T H I S   P R O D U C T   D E V E L O P S   T R O U B L E , 
CONTACT  YOUR  NEAREST  QUALIFIED  SERVICE 
PERSONNEL,  AND  DO  NOT  USE  THE  PRODUCT 
IN ITS DAMAGED STATE.
•
•
•
DTA
Safety Information 
						

							
TASCAM  CD-160MKll 
TASCAM  CD-XXX 
Contents
1 − Introduction ...............................6
Supplied accessories  ...........................6
Rack-mounting the unit  .....................6
About this manual  ..............................6
Precautions and notes for 
  placement and use  .........................
6
Beware of condensation  ...............................7
Never use a stabilizer or 
printable discs  ...............................................7
About discs  ..........................................7
Handling of compact discs...........................8
Use of the remote control unit  ..........8
Batteries  .........................................................9
Inserting batteries  ..........................................9
Connections  ........................................9
2 − Features of the 
    CD-160MKII  ..............................
10
Front panel and RC-162C 
  remote control unit  ......................
10
Rear panel  .........................................11
Display  ...............................................12
3 − Disc operations  ........................13
MP3 files and directories  .................13
Listening to CD/MP3 (1)  ....................14
To suspend playback temporarily 
  (pause mode)  ...........................................
15
To stop playbacks  ..........................................15
Search for a part of a track  ..........................15
To skip to the next or a previous track  .......15
Direct Playback  ..............................................15
Pitch control  ..................................................15
Listening to CD/MP3 (2)  ....................15
Listening through headphones  ...................16
To display the MP3 information  ..................16
Skip to the next folder (MP3)  ......................16
Programmed Playback  ......................17
To check the programmed order  .................18
To add a track to the end of 
  the program  .............................................
18
To overwrite the program  ............................18
To clear program  ...........................................18
Repeat Playback  ................................19
Repeat one track (REPEAT)  ...........................19
Repeat all the tracks (REPEAT ALL)..............19
Repeat all the tracks in the folder 
  (REPEAT ALBUM) 
(MP3 only)  ..................19
Shuffle Playback  ...............................19
Intro Check  ........................................19
Search Mode (MP3 only)  ..................20
Search for a name of track  .........................20
Search for a track in a folder  .....................21
4 − Reference and 
    specifications  ..........................
22
Troubleshooting................................22
No power  ......................................................22
Remote control doesn’t work.  ....................22
No sound  .......................................................22
Will not play.  ................................................22
Sound skips.  .................................................22
Maintenance  .................................................22
Specifications  ....................................23
Dimensions  ........................................23 
						

							
 TASCAM  CD-160MKll

Thank you for your purchase of the TASCAM 
CD-160MKII Compact Disc Player.
Before connecting and using the unit, please take time 
to read this manual thoroughly to ensure you understand 
how to properly set up and connect the unit, as well as the 
operation of its many useful and convenient functions.
After you have finished reading this manual, please keep it 
in a safe place for future reference.
Rack-mounting the unit
If you are mounting the unit in a rack, leave 1U of space 
above it and 4 inch (10 cm) or more of space at the rear.
Use the rack-mounting kit to mount the unit in a standard 
19-inch equipment rack, as shown in this section. Remove 
the feet of the unit before mounting.
Supplied accessories
In addition to this manual, the CD-160MKII has been 
packed with the following:
• RC-162C remote control unit ..........................................1
• A rack-mounting screw kit (screws and washers)  ..........1
• AAA batteries for the remote control unit  .....................2
• A waranty card  ................................................................1
Contact your TASCAM supplier if any of these items are missing.
Precautions and notes for placement and use
The CD-160MKII may be used in most areas, but to main-
tain top performance, and prolong operating life, observe the 
following notes, precautions and environmental conditions:
Avoid exposing it to extremes of temperature and 
humidity and avoid mechanical shocks and vibration.
Keep the unit away from strong magnetic fields (TV 
sets, computer monitors, large electric motors, etc.).
The nominal temperature should be between 5°C and 
35°C (41°F and 95°F).
•
•
•
Relative humidity should be 30 to 90 percent.
As the unit may become hot during operation, always 
leave sufficient space above the unit for ventilation. Do 
not install this unit in a confined space such as a book-
case, and do not put anything on top of the unit.
Avoid installing this unit on top of any heat-generating 
electrical device such as a power amplifier.
Make sure that the unit is mounted in a level position for 
correct operation.
•
•
•
•
About this manual
In this manual, we use the following conventions:
The names of keys and controls are given in the follow-
ing typeface: PROGRAM.
When the alphanumeric portion of the display shows a 
message, this is shown in the following typeface: NONE.
If a preset indicator in the display (i.e. one which cannot 
change) is shown, this is shown as follows: EPS.
•
•
•
1 − Introduction 
						

							
TASCAM  CD-160MKll 

1 − Introduction

Never use a stabilizer or printable discs
Using commercially available CD stabilizers or printable 
recordable discs with this player will damage the mecha-
nism and cause it to malfunction.
N O T E
	 Never	use 	a 	disc 	that 	has 	had 	a 	stabilizer 	mounted 	to 	
it. 	The 	residual 	adhesive 	may 	cause 	the 	disc 	to 	stick 	
to 	the 	turntable 	of 	the 	CD-160MKll. 	If 	it 	sticks 	to 	the 	
turntable, 	you 	will 	need 	a 	technician 	to 	get 	it 	out.
Beware of condensation
If the unit (or a compact disc) is moved from a cold to a 
warm place, or used after a sudden temperature change, 
there is a danger of condensation; vapor in the air could 
condense on the internal mechanism, making correct oper-
ation impossible. To prevent this, or if this occurs, let the 
player sit for one or two hours at the new room temperature 
before using.
Do not open the sealed cabinet as this might result in 
damage to the circuitry or electrical shocks. If a foreign 
object should get inside the unit, contact your supplier 
or service agency.
When removing the power plug from the wall outlet, 
always pull directory on the plug, never yank the cord.
To keep the laser pickup clean, do not touch it and 
always close the disc tray.
As the disc rotates at high speed during playback, do not 
lift or move the unit. Doing so may damage the disc or 
the laser assembly.
The voltage selector on the rear panel is only available 
on units for the North American market. Please set this 
•
•
•
•
•
to match your local supply. If you are in any doubt in 
this matter, consult an electrician.
N O T E
	 When	transporting	the	unit,	always	use	the	origi-
nal	packing	materials.	For	this	reason,	we	strongly	
recommend	that	you	save	all	the	packing	materials	
that	came	with	the	CD-160MKII,	in	case	you	need	to	
transport	it	in	the	future.
	 In	addition,	when	transporting	the	unit,	you	should	 tape	the	disc	tray	closed,	using	an	adhesive	tape	
that	will	not	spoil	the	finish	of	the	unit.
About discs
Conventional audio CDs bearing the COMPACT DISC 
DIGITAL AUDIO logo on the label:
Properly finalized CD-R and CD-RW discs.
N O T E
	 Depending	on	the	quality	of	the	disc	and/or	the	condition	of	the	recording,	some	CD-R /CD-RW	discs	
may	not	be	playable.
•
•
	 Copy-protected	discs	and	other	discs	that	do	not	conform	to	the	CD	standard	may	not	play	back	cor
-
rectly 	in 	this 	player. 	If 	you 	use 	such 	discs 	in 	this 	unit,	
TEAC	Corporation	and	its	subsidiaries	cannot	be	
responsible	for	any	consequences	or	guarantee	the	
quality	of	reproduction.	If	you	experience	problems	
with	such	non-standard	discs,	you	should	contact	
the	producers	of	the	disc. 
						

							
 TASCAM  CD-160MKll

1 − Introduction

Do not expose the infrared receiver (light receptive area 
on the front panel) to direct sunlight or intense light for 
extended periods of time. Long exposure to this light 
may result in failure of the remote control sensor.
When the remote control will not be used over one 
month, please remove the batteries to prevent the pos-
sibility of battery acid leakage which could damage 
the unit. Should leakage occur, remove and discard the 
batteries, and wipe the battery case thoroughly with a 
cloth. Avoid getting the battery liquid on the skin. After 
cleaning, replace with new batteries.
The remote control functions by using an infrared light 
signal. When using the unit to control the CD-160MKII, 
•
•
•
other devices that are turned on could be operated by its 
signal.
If the range of remote operation becomes smaller, or 
commands do not always function properly, the batter-
ies have become weak and should be replaced. Always 
replace both batteries with new batteries of the same 
type.
Point the remote control to the remote sensor on the 
main unit. Do not obstruct the path between the remote 
control and the remote sensor.
•
•
Use of the remote control unit
The CD-160MKII has been designed for the playback 
of CD-DA (standard audio) format discs and MP3 files 
recorded on the discs using the ISO9660 format: In addi-
tion to ordinary 5-inch and 3-inch CDs.
Always place the compact discs in the trays with their 
label facing upward.
To remove a disc from its case, press down on the center 
of the disc holder, then lift the disc out, holding it care-
fully by the edges.
Do not use any record spray, anti-static solutions, ben-
zene, paint thinner or other chemical agents to clean 
CDs as they could damage the delicate playing surface. 
It may cause CDs to become unplayable.
Discs should be returned to their cases after use to avoid 
dirt as well as serious scratches that could cause the 
laser pickup to “skip.”
Avoid getting fingerprints on the signal side (the non-
label side). Grime and dust may cause skipping, so keep 
discs clean and store them in their cases when not being 
played. To clean the signal side of a disc, wipe gently with 
a soft dry cloth from the center towards the outside edge.
Keep discs away from direct sunlight, and places of 
high heat and humidity. If left in such places, warping 
could result.
Do not affix any labels or stickers to the label side of the 
disc and do not use any protective coating spray.
•
•
•
•
•
•
•
Do not insert discs that have adhesive remaining from 
tape or stickers that have been removed. If they are 
inserted into the player, they could stick to the internal 
mechanism, requiring removal by a technician.
Do not use cracked discs.
Only use circular compact discs. Avoid using non-circu-
lar promotional, etc. discs.
The CD-160MKll cannot play unfinalized CD-R/RW discs.
CD-R and CD-RW discs are sensitive to the effects of 
heat and ultraviolet rays. It is important that they are not 
stored in a location where direct sunlight will fall on 
them, and which is away from sources of heat such as 
radiators or heat-generating electrical devices.
When labeling CD-R and CD-RW discs, always use a 
soft oil-based felt-tipped pen to write the information. 
Never use a ball-point or hard-tipped pen, as this may 
cause damage to the recorded side.
If you are in any doubt as to the care and handling of a 
CD-R and CD-RW discs, read the precautions supplied 
with the disc, or contact the disc manufacturer directly.
Music discs with copy control, a copy-protection sys-
tem, have been released form several record companies 
in an attempt to protect the copyright. Since some of 
these discs do not comply with the CD specifications, 
they may not be playable on the CD-160MKII.
•
•
•
•
•
•
•
•
Handling of compact discs 
						

							
TASCAM  CD-160MKll 

1 − Introduction

If batteries are used improperly, or if leakage or breakage 
occurs, the unit will not function.
Please observe the cautions indicated on the batteries and 
their packaging to ensure proper usage.
Confirm + and – polarity and follow the indications 
when inserting new batteries into the remote control.
Do not use old and new batteries together.
Even if the battery is the same size, the voltage may differ. 
Do not use batteries of different specifications together.
Do not attempt to recharge batteries that are non-
rechargeable.
Do not open or disassemble batteries, throw them into a 
fire or put them in water.
•
•
•
•
•
Batteries
Inserting batteries
1.	 Open	the	lid.
2.	 Confirm	+/- 	polarity, 	and 	insert 	two 	AAA 	batteries.
3.	 Close	the	lid.
ª
Connections
C A U T I O N
	 Turn	off	the	power	of	all	the	equipment	before	 making	connections.
	 Read	instructions	of	each	component	you	intend	to	 use	with	this	unit.
		 Be	sure	to	insert	each	plug	securely.	To	prevent	hum	 and	noise,	do	not	bundle	the	connection	cords	with	
the	power	cord.
Connect ANALOG OUTs (L,R) jacks to the input jack of 
the amplifier with a RCA cable. Make sure to connect: 
  white plug 
∑ white jack (L: left channel) 
  red plug 
∑ red jack (R: right channel)
Use an optical cable to output the signal from the DIGITAL 
OPTICAL OUT to the amplifier or recorder's input.
Use a RCA cable to output the signal from the DIGITAL 
COA XIAL OUT to the amplifier or recorder's input.
After all other connections are complete, connect the plug 
to the AC wall socket.
RL
CD-160MK#
ANALOG INDIGITAL INDIGITAL IN
N O T E
	 Before	making	a	recording	with	a	recorder	con-
nected	to	this	unit's	digital	outputs,	you	need	to	
standby	this	unit	in	playback	mode.
	 Be	sure	to	connect	the	power	cord	to	an	AC	outlet	 which	supplies	the	correct	voltage.	Hold	the	power	
plug	when	plugging	or	unplugging	the	power	cord.	
Never	pull	or	yank	on	the	power	cord.
	 The	Digital	output	on	the	CD-160MkII	does	not	in
-
clude	track	increment	data.	Some	recorders	depend	
on	this	information	to	automatically	update	track	
numbers	while	dubbing.	If	you	need	this	function,	
please	connect	the	CD-160MkII	and	the	recording	
device	with	the	analog	connections	and	use	"level	
detection"	mode	on	the	recorder	to	detect	track	
changes	(please	refer	to	the	manual	of	the	recorder	
for	how	to	select	this	mode). 
						

							
10 TASCAM  CD-160MKll

Front panel and RC-162C remote control unit
PHONES jack and knob 
For private listening, insert the headphones plug into this 
jack, and adjust the volume by turning the level knob.
PITCH CONTROL switch and knob 
Use this switch to turn the pitch control function on 
or off. When the function is on, the LED will light. 
Adjust the amount by turning the knob.
Remote Sensor 
When operating the remote control unit, point it 
towards here.
0 Display
q SHUFFLE 
Use this key for shuff le playback.
w REPEAT 
Use this key for repeat playback.
e PROGRAM 
Use this key to program tracks.
r	MP3 FOLDER (§/¶) 
During playback of a MP3 disc, use these keys to 
select a folder in the disc.
t Numeric keys (remote control only) 
Use these keys to select tracks.
y ESP/MP3 (remote control only) 
During playback of a MP3 disc, use this key to search 
track name. During playback of CD, use this key to 
switch the ESP function on or off. The default setting 
is off.
u INTRO CHECK (remote control only) 
Use this key to start the Intro Check.
N O T E
	 To	simplify	explanations,	instructions	in	this	manual	refer	to	the	names	of	the	keys	and	controls	on	the	
front	panel	only.	Associated	controls	on	the	remote	
control	will	also	operate	similarly.
7�
8�
9�
12345 6
780q we r9
RC-162C remote control unit
t
y
u
r
e
q
w
5
46
POWER 
Press this switch to turn the unit on or off.
Disc tray
OPEN/CLOSE 
Use this key to open and close the disc tray.
PLAY/READY (¥/π) 
Use this key to start or pause playback of CD/MP3.
STOP (ª) 
Use this key to stop playback of CD/MP3.
SEARCH (Ô/) / Â/¯ (SKIP)  
Use these keys to skip tracks. Hold down these keys to 
search for a part of a track.
1�
2�
3�
4�
5�
6�
2 − Features of the CD-160MKII