Home > Tascam > Controller > Tascam DS-M7. 1 Setting Up Manual

Tascam DS-M7. 1 Setting Up Manual

Add to Favourites
    Download as PDF

    View the Tascam DS-M7. 1 Setting Up Manual for free. All the Tascam manuals and user’s guides are available for free view without any registration. You can also download the manual as PDF to your computer.

    Overview Comments
    Page 1 Setting up the TASCAM DS-M7.1 TASCAM DS-M7.1 Setup Guide 1 Before you start using the TASCAM DS-M7.1 to help you with the monitoring of your surround mix, there are a few operations to be carried out which will help you use the unit most effectively. These are: trimming each channel so that each channel is correctly balanced relative to the others for your listen- ing position, adjusting the delay for the channels to avoid phase delays, etc., and setting up the overall SPL (loud- ness) of the unit....
    Page 2 Setting up the TASCAM DS-M7.1 2 TASCAM DS-M7.1 Setup Guide Setting up the TASCAM DS-M7.1 TASCAM DS-M7.1 Setup Guide 3 Trimming the levels When monitoring in surround mode, it is important that the perceived level of each channel (as perceived from the monitoring position) is equal, in order to achieve a satisfactory mix. NOTE Before proceeding further with these operations, it is important that you ensure that the input mode of the DS - M7.1 reflects the setup you are using and the output channels are...
    Page 3 Setting up the TASCAM DS-M7.1 2 TASCAM DS-M7.1 Setup Guide Setting up the TASCAM DS-M7.1 TASCAM DS-M7.1 Setup Guide 3 With the SHIFT indicator lit, press the DOWNMIX / TRIM key to bring up the screen at left. Note that the screen shown here represents a 5.1 mix. If you have your setup in a different configuration, what you see on screen may differ slightly. Now, when you press one of the MUTE CONTROL keys, the pink noise will be output from the selected channel (at the level you set earlier). The key...
    Page 4 Setting up the TASCAM DS-M7.1 Adjusting the surround level You may want to adjust the surround level (the level of the rear speakers) so that they are anything up to 10 dB qui- eter than the front speakers. Use the SYSTEM menu above to set this value. NOTE The setting of the LFE crossover and relative level is handled by the dedicated bass management sys- tem, and is treated in detail in the main manual. Typically, the default settings will handle this. Delay setting Another important aspect of working...
    Start reading Tascam DS-M7. 1 Setting Up Manual

    Related Manuals for Tascam DS-M7. 1 Setting Up Manual

    All Tascam manuals