Tascam Mac Os Quickstart Cd-r Deluxe And Cd-r Pro Manual
Have a look at the manual Tascam Mac Os Quickstart Cd-r Deluxe And Cd-r Pro Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 511 Tascam manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
SparkLE keeps complaining that theRealTime engine is overloaded. -The best solution may be to simply give SparkLE more RAM. (The more RAM the program has, the faster it can process everything.) If all else fails, simply restart SparkLE. That usually fixes the problem. In the upper right of the Master window, there is a CPU monitor that displays the CPU load. Check that to see if the CPU is actually overloaded, or if the program simply needs more RAM. SparkLE consistently complains that it had a bad block error.- Some computers keep showing this error when SparkLE comes to the end of the audio file. Basically, the computer ran out of audio to play, and so the program tells you that it couldnt read one or more samples. The problem is that the program couldnt ready anymore because there is no more! There isnt anything wrong, really. Check the box in the error message that says, Dont show me these messages anymore., and the error messages will go away for good. Im having problems with the SCSI Card in the computer. -When you went through the installation process, did you remember to install the drivers for the card? If those are not installed, then the drive will not be recognized by any program.Technical Support If you are still experiencing problems with the unit after reading the previous troubleshooting section, you can check for more up to date FAQ documents at TASCAM’s web site at: http://www.tascam.com or contact TASCAM Technical Support at: (323) 726-0303 x627 [email protected]