Tascam Pa-30 Technical Documentation Manual

							Technical Documentation
PA-30
                                       7733 T elegraph R oad   •    Montebello , CA  90640    •    (323)  726-0303    •   http://www .tascamcontr actor.comAll features and  specifications are subject to  change without notice.  Contact y our local TASCAM representativ e for the latest  information.Page 1 of 1PA -30_TECHD OC.pdf112702
• 1-U Rack Mountable  Chassis
• 30W @ 8 Ohms per Channel  (Stereo Operation)
• 60W @ 8 Ohms (B ridged Mono Operation)
• Unbalanced RCA and B alanced XLR Inputs
• Front Panel Headphone  Output
• Rear  Panel 120V/230V Selector
• Single  Input Lev el Control F or Both Channels
PRODUCT OVERVIEW
ARCHITECTS SPECIFICATIONS
Power Amp Perfo rmance:Output Power , Stereo:Output  Power , Bridged Mono:Frequency R esponse:Total  Harmonic  Distortion:Intermodulation  Distortion:Hum and Noise:Cha nnel Separ ation (1kHz):
Inputs & Outputs:Channel 1  & 2 Inputs:
Speak er Outputs:Headphone Output:   
General:Power  Requirements:Power  Consumption:Dimensions:
W eight:
30W , 8  Ohms  per channel60W, 8  Ohms20Hz -20kHz, between  +0dB and -1dB50dB , Nomina l Level
Unbalanced RCABalanced XLRPush T erminalTRS Connector
120V/230V , 50-60Hz135W19  x 1-3/4  x 10-15/16482mm x 44mm  x 276mm10 lbs (4.5Kg)
SPECIFICATIONS
TA SCAMs  PA -30 is  a 1-U r ack-mounta ble amplifier , 
ideal  for sma ll PA systems,  kiosks, meeting  facilities, 
or multi- zone spea ker  systems.
The
Whenev er
The amplifier shall be able to mount in 1U of a  standard audio 
r ack.   It shall weigh 10 lbs;  dimensions shall be 19 x 1-3/4 x 
10  (W x H x  D).
Metric f igures:  4.5Kg, 482x44x254mm.
The
The
Front
The amplifier shall meet audio  performance specifications of:
   -  Frequency 
   -  Total  Harmonic  Distortion  100dB  below rated nominal lev el
   -  Cha nnel Separ ation >50dB a t nominal level
The
The amplifier shall be a TASCAM PA-30.
NOTE:
120V230V
The PA-30 i s available  at: