Technics Digital Ensemble Sx Pr604 Owners Manual

Measure Edit
You can edit the recorded data one measure at a time.
Select the function you wish to edit.
1.During recording, press the MEASURE EDIT
button.
•The display looks similar to the following.
2.Select the function.
3.Follow the procedure to edit the function (see
below).
•Only the contents of the same pattern can be edited.
MEASURE COPY
Copy recorded data of specified measures to a specified
point.
•On the destination track, the new data replaces the current
measure contents.
1.Specify the...

MEASURE DELETE
Delete specified measures from all parts at once.
•The length of the performance accordingly decreases by
the number of deleted measures.
1.Use the FIRST MEASURE ∧ and ∨ buttons,
to specify the first measure to delete.
2.Use the LAST MEASURE ∧ and ∨ buttons to
specify the last measure to delete.
•One measure is the smallest unit that can be deleted.
3.Press the OK button.
•The confirmation display appears. Press the YES button
to execute the function, or press the NO button to cancel
the...

4.On the FROM side, use the buttons to specify
the part to copy from.
•For the DRUM part you can specify the DRUMS 1 or 2
part; for other parts you can specify a part other than a
DRUMS part.
5.On the TO side, use the FUNC ∧ and ∨ buttons
to specify for each part whether or not to copy
the data.
KEEP:
Part data is not copied.
CLEAR:
Part data is erased.
COPY:
Part data is copied.
6.Press the OK button.
SEQ TO COMPOSER COPY
Data from the SEQUENCER can be copied to a COMPOSER
memory. For example, you can...

Outline of the Disk Drive function
The Disk Drive enables you to store recorded and stored data from this instrument’s memories on disks, as well as play commercial
recorded disks on this instrument.
Internal memory and Floppy Disk
Drive
The storable internal memory of this instrument as well as
the backup time are limited. However, the Disk Drive maxi-
mizes your control of data management by allowing you to
store (SAVE) this instrument’s data on disks, and then to
recall (LOAD) it at any time.
The...

Playback of commercial song disks
DIRECT PLAY lets you enjoy playing commercially sold song
disks directly from a disk. It’s fast because you don’t have
to load the disk data into your instrument’s memory.
•DIRECT PLAY is possible from the following disks:
Standard MIDI File
Standard MIDI File with Lyrics
DISK ORCHESTRA COLLECTION™ (DOC)
PianoDisc™
* All product and company names are trademarks or
registered trademarks of their respective owners.
* DISK ORCHESTRA COLLECTION is a trademark of
the YAMAHA...

Loading data
Recall (load) the data from the disk to this instrument’s memories.
•Note that the load procedure causes any data which is currently stored in the relevant memories to be erased.
LOAD
Load data that saved to a disk into this instrument’s memory.
1.Insert the disk with the stored data into the
Disk Drive. Push it all the way in until you hear
a click.
2.On the DISK MENU display, select LOAD.
•The display looks similar to the following.
•If there are only SMF files on the disk, the display...

SMF LOAD
Load data which was saved in the “Standard MIDI File” (SMF)
format.
1.On the LOAD (PAGE 1/3) display, press the
SMF button.
•The display looks similar to the following.
•For disks which contain SMF files only, this display ap-
pears automatically when LOAD is selected on the DISK
MENU display.
2.Use the buttons below the display to select
the filename you wish to load.
•If the number of files is 10 or more, you can use the PREV
and NEXT buttons to go back or advance 10 files at a
time.
•If you...

Direct Play
You can enjoy immediate playback of “Standard MIDI File” (SMF), “Disk Orchestra Collection” (DOC) and “PianoDisc” disks—all
without loading the song data.
1.Insert the disk with the stored data into the
Disk Drive.
2.On the DISK MENU display, select DIRECT
PLAY.
•The display looks similar to the following.
3.Use the buttons below the display to select
the song you wish to have played.
•If the number of files is 10 or more, you can use the PREV
and NEXT buttons to go back or advance 10 files...

Song Medley
Songs saved from the SEQUENCER to a disk (disk data) in the TECHNICS FORMAT can be played back in a medley.
1.On the DISK MENU display, select SONG
MEDLEY from the display.
•The display looks similar to the following.
2.Select the order of files in the medley.
•If ALL is pressed, all the files are selected, and the songs
are played back in numerical in a medley.
•You can select a file and song, then press the ADD button
to add it to the song list. Repeat these steps to create
your own list of...

2.Press the YES button to format the disk, or
press the NO button to cancel the format.
•When the YES button is pressed, disk format begins. After
about 1–2 minutes, formatting is completed and DISK
NAMING display is shown.
3.Use the buttons below the display to assign a
name.
•Use the POSITION buttons to highlight the character
position in the name box. Use the ABC...123 buttons to
select the alphanumeric character. Repeat these steps to
type the whole name.
•Press the INS button to enter a space at the...