Technics Network Audio Player St C700 Owners Manual

21
Others
The sleep timer can switch the unit to standby mode after a 
set time.
1Press [NWP].
2Press [MENU].
3Press [3,4 ] repeatedly to select “SLEEP” 
and then press [OK].
4Press [ 3,4 ] to set the time (in minutes) and 
then press [OK].
“30 minutes”  ,-. “60 minutes”  ,-. “90 minutes”  ,-. “120 minutes”
^""""""""""""". “Off” !"""""""""""""J 
This unit is designed to conserve its power consumption...

22
Occasionally, Panasonic may release updated firmware for 
this unit that may add or improve the way a feature operates. 
These updates are available free of charge.
Preparation
≥Connect this unit to the network. ( >12)
– Make sure that the network is connected to the Internet.
1Press [NWP].
2Press [HOME].
3Press [ 3,4] repeatedly to select “SETUP” 
and then press [OK].
4Press [ 3,4] repeatedly to select “F/W 
Update” and then press [OK].
5Press [ 3,4 ] to select “Yes” and then press 
[OK].
≥ When the...

23
You can automatically link this unit with the SU-C700 and 
operate them easily with the remote control.
Preparation
1Connect this unit and the SU-C700 with a system 
connection cable and a coaxial digital cable. (> 9)
2 Set the power switch lever of this unit and the SU-C700 
to the [ Í/I] position.
∫Switching this unit and the SU-C700 to 
on/standby simultaneously
≥If you point the remote control at this unit and press 
[NWP Í] when this unit and the SU-C700 are in standby 
mode, this unit and the...

24
The sound is interrupted.
≥Depending on your environment, the audio may be 
interrupted during playback. Check the operating 
instructions of the connected device and the connection to 
the device.
Playback does not start.
≥Depending on your environment or connected devices, it 
may take some time.
The system control function is not working.
≥Connect the system connection cable to the system 
terminal [CONTROL1] of the SU-C700.
≥ Connect the coaxial digital cable to the digital audio input 
terminal...

25
Pairing cannot be completed.
≥Check the Bluetooth® device condition.
The device cannot be connected.
≥The pairing of the device was unsuccessful or the 
registration has been replaced. Try re-pairing the device.
≥ This unit might be connected to a different device. 
Disconnect the other device and try re-pairing the device.
The device is connected, but audio cannot be 
heard through this unit.
≥For some built-in Bluetooth® devices, you have to set the 
audio output to “ST-C700” manually. Read the...

26
“Not Conditional”
≥The function you have tried to use is not available with the 
current settings. Check the steps and settings.
“PGM Full”
≥The number of programed tracks is more than 24.
“Please Wait”
≥This is displayed, for example, when this unit is turned 
on/off. (For up to 1 minute and 30 seconds)
“Remote ” (“   ” stands for a number.)
≥ The remote control and this unit are using different codes. 
Change the code on the remote control.
– When “Remote 1” is displayed, press and hold [OK] and...

27
Specifications
∫GENERAL
Power supply AC 120 V, 60 Hz
Power consumption 26 W
Power consumption in standby mode*
1
(When “Network Standby” is off) Approx. 0.2 W
(When “Network Standby” is on) Approx. 4 W
Power consumption in off mode Approx. 0.2 W
Dimensions (Wk Hk D) 340 mm k78 mm k295 mm (13
3/8qk 31/16qk 115/8q)
Mass (Weight) Approx. 4.0 kg (8.8 lbs)
Operating temperature range 0oC to r 40oC ( r32 oF to  r104 oF)
Operating humidity range 35 % to 80 % RH (no condensation)
∫TERMINALS SECTION
Analog...

28
	
≥Specifications are subject to change without notice.
≥ Mass and dimensions are approximate.
*1 When the iPhone/iPad/iPod is not charging
*2 Prospective communication distance Measurement environment: Temperature 25 oC (77 oF) / Height 1.0 m (3.3 ft)
Measure in “Mode 1”
∫ ANALOG OUTPUT SECTION
Channel 2ch
Output level LINE OUT 2.0 Vrms
Frequency response 2Hz to 90kHz (s3dB)
THD+N 0.0012 % (1 kHz, 0 dB)
S/N 112 dB (IHF-A)
Dynamic range 112 dB (IHF-A)
∫BLUETOOTH®/NFC SECTION
Bluetooth®
Bluetooth®...

29
∫
File format
This unit supports the following file formats.
≥This unit does not support the playback of copy-protected music  files.
≥ Playback of all files in formats supported by this unit is not  guaranteed.
≥ Playback of a file in a format not supported by this unit may c ause choppy audio or noise. In such cases, check to see if this  unit 
supports the file format.
≥ This unit does not support VBR (Variable Bit Rate) playback.
≥ Some of the connected devices (servers) may be capable of...

30∫
About Bluetooth
®
Frequency band used
≥This system uses the 2.4 GHz frequency band.
Certification of this device
≥ This system conforms to frequency restrictions and has 
received certification based on frequency laws. Thus, a 
wireless permit is not necessary.
≥ The actions below are punishable by law in some 
countries:
– Taking apart or modifying the system.
– Removing specification indications.
Restrictions of use
≥Wireless transmission and/or usage with all Bluetooth® 
equipped devices is not...