Tenda Router TEI480T User Manual

                     TEI480T/490T/4000 Enterprise & Net-bar Level Router 
z  IP data Traffic and Rate: To display the data of visiting the router and 
visiting the external network. 
z  Link Count: To display the Link Counts established by the IP 
z  Operation: You can restrict or release  this IP 
z   Binding: To bind this IP with the MAC loaded. But the ARP Binding in 
IP-MAC binding should be enabled 
 Notice:  If you have not enabled the “Defense Network Attack” function 
in “Security Setting”, the...

                     TEI480T/490T/4000 Enterprise & Net-bar Level Router 
¾  Port for Monitoring: To collect the data packet of the ports being 
monitored 
¾  Port Be Monitored: All the data pa ckets transmitted or received by this 
port are copied and send to the Port for Monitoring 
4.3.5.3 VLAN 
¾   In this section, you are able to c onfigure the basic parameters of VLAN 
function, this router supports VLAN (Port based VLAN).Only the ports 
set in the same VLAN group are able to communicate with each...

                     TEI480T/490T/4000 Enterprise & Net-bar Level Router 
z  You are able to configure reasonable bandwidth for respective LAN 
port to control the download rate of each port, and able to utilizing the 
networks resources sufficiently If you  don’t want to limit the bandwidth 
of a certain LAN port, then please configure it as “No Limit”. 
4.3.5.5 LAN IP Control   
In this page you are able to set actual transmission bandwidth of every 
IP address segment in LAN, to contro l effectively...

                     TEI480T/490T/4000 Enterprise & Net-bar Level Router 
network, and to prevent ARP cheating. 
z  Load All: To Load the IP and MAC addresses displayed in Advance 
SettingÆ  Statistic. If you want to add IP and MAC addresses in the 
network, please add this manually. 
z   Other Configuration: Add Item, E nable Item, Delete Item, Search Item 
and Save 
 
 
 
 
 
 
 
 
 
 
 
 
 
  Notice:  If you enable this function, there is no IP or MAC addresses in 
the table, then all the computers...

                     TEI480T/490T/4000 Enterprise & Net-bar Level Router 
4.3.6.1 Virtual Server   
z  Virtual Server is defined as a service port. All external access to this 
port of WAN is re-oriented  to the computers on the LAN 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
¾  Service Port: LAN service port, this refers to the internal service port 
which should be connected to the WAN service port.   
¾  Network IP: Please input the IP of the internal host which requires to 
open virtual service. 
¾  Protocol:...

                     TEI480T/490T/4000 Enterprise & Net-bar Level Router 
Setting” with a value different from 80, for example, 8080 Otherwise, conflict 
would happen and cause the virtual server to fail to work. If this happens, in 
order to activate this function again, you should restart the router. 
4.3.6.2 UPnP Setting 
  
TEI480T/TEI490T/4000 supports the latest Universal Plug and Play. It 
would be effective under OS Windows ME/ Windows XP or above (Remarks: 
The OS should be integrated, and...

                     TEI480T/490T/4000 Enterprise & Net-bar Level Router 
Internet Games, Video Meeting, Internet Phone etc. Because the firewall of 
the router exists, these programs are  not able to work under pure virtual 
services. In this case, you could set the computer as DMZ host. 
As in the figure above, please input t he “DMZ Host IP”of the IP address of 
the computer which is required to se t as DMZ on the LAN. Then please click 
“Enable” to make the DMZ take effect. 
4.3.7 Security Setting...

                     TEI480T/490T/4000 Enterprise & Net-bar Level Router 
Steps for Client filter configuration are as follows: 
1)  Please Click “Security setting” and choose submenu “Client Filter” 
2)  Put IP address of the computer which are going to be controlled on the 
LAN into the “IP” section. 
3)  Fill in “Port” with the port name you expect to control. 
4)  In “Type”’, please choose the pr otocol used by the controlled data 
packets. (“All” indicates TCP/ UDP) 
5)  In “Time” section, please...

                     TEI480T/490T/4000 Enterprise & Net-bar Level Router 
4)  In “URL string”, please input the filtered domain name, or input part of 
the filtered domain name. If you input  a certain character string, the 
computer with selected IP would not be able to access to all domain 
names containing this character string. 
5)  Choose “Enable” to activate this filter rule. This rule is only effective for  the WebPages to which the brow ser’s accessing port is 80. 
6)  Click “Save” to complete...

                     TEI480T/490T/4000 Enterprise & Net-bar Level Router 
“Configure MAC” section, and fill in “Note” with proper description. And 
you can also select the MAC address of the host which you know in 
the table of “Operate”, please click ”Add” and then click “Save” to 
complete configuration. 
4.3.7.4 Defense Network Attack 
    
z   Enable each function to prevent  hacker and the various attacks, and 
protect the network security.   
¾   Defend Dos Attack: Only after enabling the Defend...