THOMSON Dpl911vd User Manual

THOMSON
46, quai Alphonse Le Gallo
92648 Boulogne
Cedex FRANCE
www.thomson.net
55930860
 

DPL911VD
It is important to read this instruction book prior to using your new product for the first time.
user
manual
 

Safety Information
Thomson Information
CAUTION!
Invisible laser radiation when open.  Avoid exposure to beam.
Class 1 laser product.  This system must be opened only by
qualified technicians to prevent accidents caused by the laser
beam.
LASER λ = 780nm, P max=5 mW
Rating Information : At the bottom of the unit.
This unit complies with the existing requirements.
In accordance with the rating plate of the unit, this unit com-
plies with current standards concerning electrical safety and
electromagnetic...

Table of Contents
General Information
Features ........................................................... 2
DVD region codes ........................................... 2
Disc can be played ........................................... 2
Glossary of disc term ....................................... 2
Conventions about this manual ..................... 2
Notes on disc ................................................... 3
Accessory ......................................................... 3
Inserting...

2
Features
•DVD player built-in Dolby Digital*2 / DTS*1 decoder.
•Digital amplifier.
•Tuner (AM/FM) receiver.
•Conforming DVD, SVCD, VCD1.1, VCD2.0, MP3, CDR,
CDRW and CD-DA discs.
•DVD navigation and SVCD, VCD 2.0 PBC controlling
functions.
•VFD front panel display and OSD menu display.
•Full function remote control.
*1Manufactured under license from Digital Theater
Systems, Inc. US Pat. No. 5,451,942, 5,956,674,
5,974,380, 5,978,762 and other world-wide patents
issued and pending. DTS and DTS Digital...

EN
3
General Information
Notes on disc
Disc handling precautions
•To keep the disc clean, handle the disc by its edge. Do
not touch the surface.
•Do not stick paper or tape on the disc.
If there is glue (or a similar substance) on the disc,
remove the glue completely before using the disc.
•Do not expose the disc to direct sunlight or sources
such as hot air ducts, or leave it in a car parked in
direct sunlight as there can be considerable rise in
temperature inside the car.
•After playing, store the...

EN
5
Function Overview
1. Speaker Icons
Indicates which of the six speakers is operating.
2. Status Bar
Shows the operating information.
3. Frequency Unit Indicator
In AM mode, “KHz” lights up. In FM mode, “MHz” lights
up.
4. VCD indicator
Shows when VCD is playing.
5. Dolby Pro Logic
Shows when the playing disc is recorded in Dolby Pro Logic
format.
6. Dolby Digital indicator
Shows when the playing disc is recorded in Dolby Digital
format.
7. DVD indicator
Shows when a DVD is playing.
8. PAUSE...

PR
AV
6
Function Overview
Remote Control
Please be sure you have inserted the batteries into the
remote control (see relevant section on page 3.) You can test
it by pressing any button.
1. ON-OFF
• To turn on or turn off the receiver and other auxiliary components.
2. Source Buttons
• To turn on and select various audio / video sources.
3. PR+, PR- (Channel Buttons)
• To select programmed stations in TUNER mode.
• To skip to the next / previous chapter, track or image in DVD, CD , mp3
and JPEG mode.
4....

EN
7
Connections
Connecting to AM / FM antenna
•Connect the supplied AM loop antenna to the AM jack.
Position the loop antenna to receive the clearest sound.
•Connect the supplied FM antenna to the FM jack. Move
the antenna in various direction until the clearest signal
is received.
Note
•Keep the antenna as far away as possible from the TV,
VCR or any radiation source to prevent unwanted noise.
If you have poor FM reception
For better FM reception, use a 75 ohm coaxial cable (not
supplied) to connect...

8
•Use the supplied audio cables to connect AUDIO IN
jacks to the corresponding audio output jacks on the
TV, VCR or other audio/visual components.
•Use the audio cables to connect AUDIO OUT jacks to
the corresponding audio in jacks on the TV, CD or
TAPE recorder.•   Connect the S-VIDEO OUT jack to the S-Video input
jack on the TV using a S-Video cable (not included).
•   Connect the VIDEO OUT jack to the Video input jacks
on the TV using a video cable.
•   Connect the AUX2 jacks to any audio/video...