TomTom Navigator Manual

TomTom NAVIGATOR 

Before you start...1.
2
Before you start...
Setting up
To start using your phone as a navigation device, tap the TomTom button in 
the Windows Mobile start menu.
To set up your navigation device, you need to answer a few questions by 
tapping the screen.
Important: Take care to select the correct language, since the language you 
choose will be used for all menus and written instructions.
Activation
You will be asked how you want to activate the map that comes with 
NAVIGATOR. There are two ways to do...

3
Switching on and off
To switch your TomTom NAVIGATOR on or off, press and hold the On/Off 
button for 2 seconds. The first time you switch on, it may take a short while for 
your device to start.
Note: In rare cases, your NAVIGATOR may not start correctly. If this happens, 
press the reset button, then switch on the device again.
To use your TomTom NAVIGATOR on your telephone, tap the NAVIGATOR 
button.
Exit 
application
To close TomTom NAVIGATOR, tap Exit application in the Main Menu. We 
recommend...

Driving View2.
4
Driving ViewWhen your TomTom NAVIGATOR starts, you are shown the Driving View 
along with detailed information about your current location.
Tap the centre of the screen at any time to open the Main Menu.
Note: The Driving View is shown in black and white until your NAVIGATOR 
locates your current position.
ATap + and - to zoom in and out.
BQuick menu - switch this on in the Preferences menu.
CYour current position.
DThe name of the next major road or road sign information, if...

5
To set up Traffic information, tap TomTom Traffic in the Main Menu. 

Making your first journey3.
6
Making your first journeyPlanning a route with your TomTom NAVIGATOR is easy. To plan your first 
route, follow the steps below.
Important: You should always plan your journey before you start driving. It is 
dangerous to plan a route while driving.
1. Tap the screen to bring up the Main Menu.
Note: The buttons on your NAVIGATOR are shown in full colour unless a 
button is currently unavailable. For example, the button named Find 
alternative... in the Main Menu is not...

7
Note: You can enter a postcode for any country. In the UK and the 
Netherlands, postcodes are detailed enough to identify a house on their own. 
In other countries you can enter a postcode to identify a town or area. You will 
then have to enter a street and house number.
•Crossing or intersection - tap this button to set your destination as the 
point where two streets meet.
In this example, we will enter an exact address.
4. Tap Street and house number.
Note: When planning a trip for the first time...

8
8. Your NAVIGATOR asks if you need to arrive at a particular time. For this 
exercise, tap NO.
The route is calculated by your NAVIGATOR. 
9. When the route has been calculated, tap Done.
Your NAVIGATOR will immediately begin to guide you to your destination, 
using both spoken instructions and on-screen directions.
Arrival times
When you plan a route, your TomTomNAVIGATOR asks you if you need to 
arrive at a particular time.
Tap YES to enter a preferred arrival time.
Your NAVIGATOR calculates your...

9
What are the other navigation options?
When you tap Navigate to..., you can set your destination in many ways, not 
just by entering the address. The other options are listed below:You will arrive 19 minutes late.
If the estimated arrival time is later than the time you entered, 
it is shown in red.
Status bar 
preferences
Ta p  Status bar preferences in the Preferences menu, to enable or disable 
arrival time notifications.
Select the required options on the first menu screen and then tap Done.
To...

10
Planning a route in advance
You can also use your NAVIGATOR to plan journeys in advance by selecting 
both your starting point and your destination. You could, for example, do the 
following:
• Find out how long a journey is going to take before you start.
• Check the route of a journey you are planning.
• Check a route for someone who is coming to visit you, so that you can 
explain the route to them.
To plan a route in advance, follow these steps:
1. Tap the screen to bring up the main menu.
2. Tap...