TomTom Start 2 Manual

							41 
 
 
 
2. Select Search. 
 
The search screen opens with the keyboard showing. 
3. Use the keyboard to enter the name of the place you want to plan a route to. 
Tip: If you press and hold a letter key on the keyboard, you get access to extra characters if they 
are available. For example, press and hold the letter e to access characters 3 e è é ê ë and 
more. 
 
You can search for a POI (Point of Interest) type, such as a restaurant or tourist attraction. Alter-
natively, you can search for a specific POI, for example Rosies Pizzeria. 
Note: W hen searching, the whole map is searched. If you want to change how the search is 
done, select the search type button and then select a search option. 
4. As you type, suggestions based on what you have entered are shown in columns. You can 
continue typing or select a suggestion. 
 
Tip: To see more results, hide the keyboard or scroll down the results list. 
Tip: You can switch between seeing the results on the map or in a list by selecting the list/map 
button:  
 
5. Select a POI type or an individual POI. If you selected a POI type, select a POI.  
						

							42 
 
 
 
The location is shown on the map. 
6. To see more information about the POI, select the POI on the map and then select the pop-up 
menu button. Select More Information on the pop-up menu.  
 
You see more information about the POI such as the phone number, full address and email.  
7. To plan a route to this destination, select Drive/Ride depending on which device you are using. 
A route is planned and then guidance to your destination begins. As soon as you start driving, the 
guidance view is shown automatically. 
Tip: If your destination is in a different time zone, you see a plus (+) or a minus (-) sign and the 
time difference in hours and half hours in the arrival information panel. The estimated time of 
arrival is the local time at your destination. 
Tip: You can add a stop to a route that you have already planned. 
Tip: You can save a route using My Routes. 
 
Planning a route to a POI using online search 
QUICK SEARCH ONLY 
Important: In the interest of safety and to avoid distractions while you are driving, you should always 
plan a route before you start driving. 
Note: Searching online is only available on connected devices. To search online on your START, 
you must be connected to TomTom services. 
If you did a POI search but could not find the POI you were looking for, you can search TomTom 
Places online. To find POIs by searching online, do the following: 
1. Search for a POI using Search in the Main Menu.  
						

							43 
 
 
 
The search results are shown in two columns. 
 
2. Select Search Places Online. 
3. Use the keyboard to enter the name of the POI you want to find, then press the Search button on 
the keyboard. 
Tip: If you press and hold a letter key on the keyboard, you get access to extra characters if they 
are available. For example, press and hold the letter e to access characters 3 e è é ê ë and 
more. 
You can search for a POI (Point of Interest) type, such as a restaurant or tourist attraction. Alter-
natively, you can search for a specific POI, for example Rosies Pizzeria. 
Note: W hen searching, you can search near your current location, in a town or city, or near your 
destination. If you want to change how the search is done, select the button to the right of the 
search box. 
The search results are shown in a column. 
 
Tip: To see more results, hide the keyboard or scroll down the results list. 
Tip: You can switch between seeing the results on the map or in a list by selecting the list/map 
button:  
 
4. Select an individual POI from the list. 
The location is shown on the map.  
						

							44 
 
 
 
5. To see more information about the POI, select the POI on the map and then select the pop-up 
menu button. Select More Information on the pop-up menu.  
 
You see more information about the POI such as the phone number, full address and email.  
6. To plan a route to this destination, select Drive/Ride depending on which device you are using. 
A route is planned and then guidance to your destination begins. As soon as you start driving, the 
guidance view is shown automatically. 
Tip: If your destination is in a different time zone, you see a plus (+) or a minus (-) sign and the 
time difference in hours and half hours in the arrival information panel. The estimated time of 
arrival is the local time at your destination. 
Tip: You can add a add a stop to a route that you have already planned. 
Tip: You can save a route using My Routes. 
 
Planning a route using the map 
Important: In the interest of safety and to avoid distractions while you are driving, you should always 
plan a route before you start driving. 
To plan a route using the map, do the following: 
1. Move the map and zoom in until you can see the destination that you want to navigate to. 
 
Tip: You can also select a map symbol to open the pop-up menu, then select the Drive/Ride 
button to plan a route to that location. 
2. When you have found your destination on the map, select it by pressing and holding the screen for 
about one second.   
						

							45 
 
 
 
A pop-up menu shows the nearest address. 
 
3. To plan a route to this destination, select Drive/Ride depending on which device you are using. 
A route is planned and then guidance to your destination begins. As soon as you start driving, the 
guidance view is shown automatically. 
Tip: You can use the location you selected in other ways, such as adding it to My Places, by 
selecting the pop-up menu button. 
 
Tip: If your destination is in a different time zone, you see a plus (+) or a minus (-) sign and the 
time difference in hours and half hours in the arrival information panel. The estimated time of 
arrival is the local time at your destination. 
Tip: You can add a stop to a route that you have already planned. 
Tip: You can save a route using My Routes. 
 
Planning a route using My Places 
To navigate to one of My Places from your current location, do the following: 
1. Select the Main Menu button to open the Main Menu.  
 
2. Select My Places. 
  
						

							46 
 
 
 
A list of all your Places opens. 
 
3. Select the Place you want to navigate to, for example Home. 
Your chosen Place is shown on the map with a pop-up menu. 
 
4. To plan a route to this destination, select Drive/Ride depending on which device you are using. 
A route is planned and then guidance to your destination begins. As soon as you start driving, the 
guidance view is shown automatically. 
Tip: If your destination is in a different time zone, you see a plus (+) or a minus (-) sign and the 
time difference in hours and half hours in the arrival information panel. The estimated time of 
arrival is the local time at your destination. 
Tip: You can add a stop to a route that you have already planned. 
Tip: You can save a route using My Routes. 
 
Planning a route using coordinates 
QUICK SEARCH ONLY 
Important: In the interest of safety and to avoid distractions while you are driving, you should always 
plan a route before you start driving. 
To plan a route using a pair of coordinates, do the following: 
1. Select the Main Menu button to open the Main Menu.  
  
						

							47 
 
 
 
2. Select Search. 
 
The search screen opens with the keyboard showing. 
3. Select the type of search button to the right of the search box. 
 
4. Select Latitude Longitude. 
Tip: The example coordinates shown on the screen are your current latitude and longitude. 
5. Type in your pair of coordinates. You can enter any of these coordinate types: 
 Decimal values, for example: 
N 51.51000      W 0.13454 
51.51000     -0.13454 
Tip: For decimal values you dont have to use a letter to indicate the latitude and longitude. 
For locations west of the 0 meridian and locations south of the equator, use a minus sign (-) 
before the coordinate. 
 Degrees, minutes and seconds, for example: 
N 51°30′31″      W 0°08′34″ 
 GPS standard coordinates, for example: 
N 51 30.525      W 0 08.569 
Note: The bar below the coordinates goes red if you enter coordinates that are not recognised by 
your START. 
6. As you type in the coordinates, suggestions are shown based on what you have entered. You can 
continue typing or select a suggestion. 
Towns and roads are shown on the left, POIs are shown on the right. 
Tip: To see more results, hide the keyboard or scroll down the results list. 
Tip: You can switch between seeing the results on the map or in a list by selecting the list/map 
button:  
 
7. Select a suggestion for your destination. 
The location is shown on the map. 
8. To plan a route to this destination, select Drive/Ride depending on which device you are using. 
A route is planned and then guidance to your destination begins. As soon as you start driving, the 
guidance view is shown automatically. 
Tip: If your destination is in a different time zone, you see a plus (+) or a minus (-) sign and the 
time difference in hours and half hours in the arrival information panel. The estimated time of 
arrival is the local time at your destination. 
Tip: You can add a stop to a route  that you have already planned. 
Tip: You can save a route using My Routes. 
  
						

							48 
 
 
 
Planning a route using a mapcode 
QUICK SEARCH ONLY 
Important: In the interest of safety and to avoid distractions while you are driving, you should always 
plan a route before you start driving. 
To plan a route using a mapcode, do the following: 
1. Select the Main Menu button to open the Main Menu. 
 
2. Select Search. 
 
The search screen opens with the keyboard showing. 
3. Type in your mapcode. You can enter any of these mapcode types: 
 International, for example, WH6SL.TR10.  
 Country-specific, for example, GBR 8MH.51. 
 Alternative country-specific, for example, GBR 28.Y6VH or GBR LDGZ.VXR. 
Tip: All the mapcodes in this example are for the same location - Edinburgh Castle in the UK. 
See About mapcodes for information on how to get a mapcode for a location.  
4. When the full map code has been entered, the location is shown in the Addresses column. 
Towns and roads are shown on the left, POIs are shown on the right. 
Tip: To see more results, hide the keyboard or scroll down the results list. 
Tip: You can switch between seeing the results on the map or in a list by selecting the list/map 
button:  
 
5. Select a suggestion for your destination. 
6. To plan a route to this destination, select Drive/Ride depending on which device you are using. 
A route is planned and then guidance to your destination begins. As soon as you start driving, the 
guidance view is shown automatically. 
Tip: If your destination is in a different time zone, you see a plus (+) or a minus (-) sign and the 
time difference in hours and half hours in the arrival information panel. The estimated time of 
arrival is the local time at your destination. 
Tip: You can add a stop to a route that you have already planned. 
Tip: You can save a route using My Routes. 
 
Planning a route in advance 
You can plan a route in advance before you drive it. You can save the route as part of your My Routes 
list.  
To plan a route in advance, do the following: 
1. Search for the location you want to use as a starting point.  
						

							49 
 
 
 
2. Select Show on Map. 
3. Select the pop-up menu button. 
A pop-up menu shows a list of options. 
 
4. Select Use as Starting Point. 
5. Search for the location you want to use as your destination. 
6. Select Show on Map. 
7. Select Drive/Ride in the pop-up menu. 
Your route is planned using your chosen starting point and destination. The estimated journey 
time is shown at the top of the route bar. 
Tip: Stops, POIs and Places can all be selected as starting points using their pop-up menus. 
Tip: You can save the route in My Routes. 
8. To drive to the starting point, select Drive/Ride at the top of the screen. 
The starting point of the route is converted to your first stop and then the route is planned. Guid-
ance to your destination begins from your current location. As soon as you start driving, the 
guidance view is shown automatically. 
Changing the starting point to be your current location 
1. Select the starting point of the route in the map view. 
2. Select the pop-up menu button. 
A pop-up menu shows a list of options.  
 
3. Select Remove Starting Point. 
Your route is replanned with your current location as the starting point. The original starting point is 
removed from your route.  
						

							50 
 
 
 
Changing the starting point into a stop 
1. Select the starting point on the route in the map view. 
2. Select the pop-up menu button. 
A pop-up menu shows a list of options.  
 
3. Select Change to a Stop. 
Your route is replanned with the starting point changed into a stop.  
Finding a car park 
Important: In the interest of safety and to avoid distractions while you are driving, you should always 
plan a route before you start driving. 
To find a car park, do the following: 
1. Select the Main Menu button to open the Main Menu.  
 
2. Select Parking. 
 
The map opens showing the locations of car parks. 
 
If a route is planned, the map shows car parks near your destination. If a route isnt planned, the 
map shows car parks near your current location.