Tone Commander 6002ta Analog Port Terminal Adapter User Guide
Here you can view all the pages of manual Tone Commander 6002ta Analog Port Terminal Adapter User Guide. The Tone Commander manuals for Telephone are available online for free. You can easily download all the documents as PDF.
Page 1
6002TA Analog Port Terminal Adapter User Manual
Page 2
Page 3
Tone Commander 6002TA User Manuali Contents Introduction .......................................................................................... 1 Operation .............................................................................................. 3 Placing a Call ..................................................................................... 3 Answering a Call ................................................................................ 3 Switching a Call Between the POTS Port and...
Page 4
iiTone Commander 6002TA User Manual
Page 5
Tone Commander 6002TA User Manual1 Introduction The Model 6002TA Analog Port Terminal Adapter adds one POTS (Plain Old Telephone Service) port to a Tone Commander 6210 or 6220 ISDN telephone, for standard telephones, fax machines, or analog modems. Adapter circuitry is housed in a telephone base that replaces the standard base. POTS port features include independent ring delay settings, call waiting tone and caller ID display support, a privacy option to prevent line access from the 6210/6220 when busy,...
Page 6
2Tone Commander 6002TA User Manual TTY – the analog port provides a standard non-acoustical connection point for TTY (teletypewriter) devices that meets the accessibility requirements of Section 508 for communication disabled users. You cannot place a modem or fax call and a voice call at the same time (only one active call is allowed). See page 6 for modem and fax application settings.
Page 7
Tone Commander 6002TA User Manual3 Operation Placing a Call ___________________________ Go off-hook on the analog phone, wait for dial tone, then dial the called number. The originating call appearance indicator on the 6210/6220 will light amber while that line is in use by the POTS port. The call appearance selected for originating POTS calls (see page 13) is used if idle. If this call appearance is in use, another primary originating call appearance will be used if available. Only one call can be...
Page 8
4Tone Commander 6002TA User Manual Switching a Call Between the POTS Port and Speakerphone or Handset ________________ Use the 6210/6220 Spkr key or hookswitch to switch a call from the analog phone to the 6210/6220 speakerphone or handset. The call will be disconnected from the POTS port. To switch the call back to the analog phone, hang up the analog phone first, go off-hook, then press the # key on the analog phone. You will not hear dial tone, and the # tone will not be sent out over the ISDN line....
Page 9
Tone Commander 6002TA User Manual5 Conferencing Calls ______________________ Press the Flash key on the analog phone to place the current call on hold and originate a new call. Dial the second party. After the second party answers, flash again to conference all parties together. If the second party is busy, does not answer, or does not want to join the conference, hang up. Your phone will ring, and you will be reconnected to the first party when you answer. To add another party to the conference, flash...
Page 10
6Tone Commander 6002TA User Manual Using an Analog Modem or Fax ____________ An analog modem or fax device may be connected to the POTS port. For this application: • If you have a dedicated call appearance (directory number) for incoming modem or fax calls, set ringing control for the POTS port to ALWAYS on that call appearance (page 10) for immediate answer by the fax or modem device. Set all other call appearances to NEVER. • Set the ringing control for the 6210/6220 to NEVER for the fax/modem call...