Toshiba Memory Installation Guide Manual

							SPEED.  POWER.  PERFORMANCE.MEMORY INSTALLATION GUIDE:#1005020C
Toshiba T1900, T1910, T1950, T1960, T4500, T4600,
T4700, T4800, T4850
DescriptionViking P/N4Mb Memory Credit Card           T2012U, RT2012U
8Mb Memory Credit Card           T2013U, RT2013U
16Mb Memory Credit Card         T2014U, RT2014U
32Mb Memory Credit Card         T2015U, RT2015UINSERTTOSHIBA*Note:
Not every system will accept all the memory options listed.  Please refer to your Toshiba Reference Manual for your specificupgrades and configuration paths available.INSTALLATION INSTRUCTIONS: Prepare the Computer
Before you install a memory credit card, the computer must be
configured for boot mode.  To make sure the computer is set
up properly, use the Pop-up Window, MaxTime or Setup.
*Note:
You must turn the computer off before you install amemory card.  Failure to do so can damage thecomputer and the memory card.Caution:
Electro Static Discharge (ESD) can damage electronic
components. Before touching the memory module, ensure
that you are discharged of static electricity by touching a
grounded metal object.OPEN THE COVER:
To open the memory slot cover and locate the memory slot,
follow these steps:
1.Turn off the computer.
2.Disconnect the AC adapter and open the display.3.Locate the memory slot cover on the right side of the
computer. (The Toshiba T4600, T4700, T4800, T4850
have the memory slot cover on the left side of the
computer.)
4.  Place your finger on top of the cover and pull it open.INSTALL THE CARD
To install the memory card in the slot, follow these steps:
*Note:
To avoid damaging the memory card, be careful notto touch its edge connector  (the edge you install intothe computer.1.Insert the memory card, label side up into the memory
card slot as illustrated below.2.Carefully slide the memory card into the slot and push
firmly but gently to ensure a firm connection.  As you
insert the card, guides in the computer lead it into the
socket.  Do not force the card into position.
3.Close the cover.
4.Connect the AC adapter and turn the power on.
The installation is now complete.