Uniden Uh088sx Cb Tranciever Owners Manual

UNIDEN uh088sx
CB RADIO 

1
Controls/Indicators/Connections
Controls....................................................................................... 3
Indicators.................................................................................... 4
Connections................................................................................ 5
Introduction
Features....................................................................................... 6
Preventative...

Contents
Continuous Tone Coded Squelch System (CTCSS)............................... 16
Selective Calling (Optional Selcall PCB Required)
Outline........................................................................................ 17
Selective Calling (SELCALL)......................................................... 17
Receiver Quieting (Tone Squelch)................................................ 17
Call Alarm.................................................................................... 17...

Controls/Indicators/Connections
1.
2. -These controls are used to select the desired
communication channel.
3.
Turns the uh088sx power ON or OFF and adjusts the volume.
Eliminates background noise in the absence of an incoming spiral.
4. Press to transmit and release to receive.
5. - Press to transmit SELCALL codes, it functions on condition that
SELCALL option is installed.
6.
Press this button momentarily to choose semi-duplex opeartion for channels 1 through 8.
7. Switches operation between OPEN SCAN...

9. MEMORY CONTROL (MEM) -
10. TONE SQUELCH CONTROL (TSQ) -
10 Secondary function: Continuous Tone Coded Squelch System (CTCSS)
11. Channel Indicator
12. Scan Indicator (SCN)
13. Priority Indicator (PRI)
14. Continuous Tone Coded Squelch System (CTCSS) Code
15. Frequency Indicator
16. RECEIVE SIGNAL/ RF LEVEL indicator (S/RF)
17. DUPLEX Indicator (DUP)
18. TRANSMIT indicator (TX)
20. CALL Indicator (CAL)
21. MEMORY Indicator (MEM)
22. GROUP SCAN Indicator (GS)Places channel numbers into the memory scan...

CONNECTIONS
FRONT PANEL
BACK PANEL
23. MICROPHONE SOCKET
24. EXTERNAL SPEAKER JACK -
25. ANTENNA CONNECTOR
26. DC POWER CORDThe microphone plug is inserted into this socket.
used for remote receiver monitoring. When the external speaker is connected, the
internal speaker is automatically disconnected. The connecting wire must use a 3.5mm miniature plug only.
- Connect the Antenna here using a standard UHF (PL259) type connector.
- DC Power is connected to the transceiver through this jack. A power cord...

The Uniden uh088sx is designed to provide you with years of trouble free service. Its rugged components and
materials are capable of withstanding harsh environments.
We are certain that you will enjoy your uh088sx. Please read this operating Manual carefully to ensure you gain the
optimum performance of the unit.
Transmit & Receive FM 40CH (UHF - CB, TX Power 5w)
7 Segments LCD
CTCSS function
Tone Squelch (Selcall) Capability
Duplex Capability (from CH01 - CH08 per channel)
Open Scan/Group Scan
Variable...

LAYOUT
Front Panel Layout
Microphone Layout
PTT Tone Call
UNIDEN UHF CB Transceiver
Introduction
7 

UNIDEN UHF CB Transceiver
Included with your uh088sx CB radio
Mounting Bracket, Knobs,
Rubber washer, Washer Stars
and Screws.
UNIDENuh088sx
CB RADIO
uh088sx Owners Manual Microphone
Microphone Hanger Screws
and washers
8
DC Power Cord with fuse