Home > Vidikron > Projector > Vidikron Projector Vision Model 10 User Manual

Vidikron Projector Vision Model 10 User Manual

Here you can view all the pages of manual Vidikron Projector Vision Model 10 User Manual. The Vidikron manuals for Projector are available online for free. You can easily download all the documents as PDF.

Page 31

Installation
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual 21 
PREL
IMINARY
MountingThere are several methods for mounting the projector. Depending on your chosen 
installation, one method may be more suitable than another. 
Floor Mounting: In typical front and rear screen installations the projector can be mounted 
to a secure and level surface, such as a table or cart. Carts are useful when moving a projector 
during a presentation or from site to site. If possible, lock the wheels when...

Page 32

Installation
22 Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
PREL
IMINARY
3.4 
Connections to the Vision 
10/12
Proceed as follows to connect the Vision 10/12 to your video sources, external controller(s) -- 
if present -- and AC power. 
When connecting your equipment:
 Turn off all equipment before making any connections.
 Use the correct signal cables for each source.
 Ensure that the cables are securely connected. Tighten the thumbscrews on connectors 
that have them. 
Connector Panel...

Page 33

Installation
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual 23 
PREL
IMINARY
Figure 3-7. DVI Source Connections
DVD player or 
DTV decoder
DVI-D cable
Desktop Computer
DVI-D cable 

Page 34

Installation
24 Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
PREL
IMINARY
Figure 3-8. HDMI Source Connections
DVD player or 
DTV decoder
HDMI-to-DVI-D cable
(not included) 

Page 35

Installation
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual 25 
PREL
IMINARY
RGB-HD Connections: The Vision 10/12 has an RGB input for connecting a personal 
computer or DTV decoder with an RGB output. See 
Figure 3-9.
Figure 3-9. Analog RGB Connections
1. Refer to Computer Signal Compatibility on page 60 for a list of 
computer signals compatible with the Vision 10/12. Use with signals 
other than those listed may cause some functions not to work.
2. Some Macintosh computers may require a...

Page 36

Installation
26 Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
PREL
IMINARY
Component Video Connections: If you have a DVD player or DTV decoder with a 
component (YPbPr) output, connect it to the Vision 10/12 as shown in 
Figure 3-10. 
Figure 3-10. Component Video Connections
Composite/S-Video Connections: The Vision 10/12 has S-Video and composite video 
inputs for connecting a VCR, camcorder, laser disc player or DVD player; see 
Figure 3-11.
Figure 3-11. Composite and S-Video Connections...

Page 37

Installation
Vidikron Vision Model 10/Model 12 Owner’s Operating Manual 27 
PREL
IMINARY
RS-232 Controller 
Connection
Use a standard, 9-pin RS-232 cable to connect a PC or home theater control/automation 
system (if present) to the RS-232 port on the Vision 10/12; see 
Figure 3-12. 
For more information about using this connection, refer to Serial Communications on 
page 55.
Figure 3-12. RS-232 Control System Connection
Connecting to the 12-Volt 
Trigger Output 
If your home theater contains equipment...

Page 38

Installation
28 Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
PREL
IMINARY
Notes: 

Page 39

Vidikron Vision Model 10/Model 12 Owner’s Operating Manual 29 
PREL
IMINARY
4.1 
Turning on the Power
1. Turn on your source components.
2. Plug the female end of the power cord into 
the AC receptacle on the rear of the Vision 
10/12 (AC 100V ~ 240V).
3. Connect the other end to your AC power 
source. The power indicator lights blue to 
indicate that the Vision 10/12 is in “standby” 
mode.
4. Press the ON button on the remote control 
to turn on the projector. The power indicator 
turns off.
5. After a...

Page 40

Operation
30 Vidikron Vision Model 10/Model 12 Owner’s Operating Manual
PREL
IMINARY
4.3 
Changing the OSD 
Language
The Vision 10/12 OSD language is initially set to English, but can also display the menus in 
French, Italian, German or Spanish. To change the OSD language:
1. Press MENU.
2. Select Installation from the Main Menu.
3. Select Language from the Installation Menu.
4. Press  or  to select the desired language. The change takes effect immediately. 
4.4 
Adjusting the Picture 
Orientation
By...
Start reading Vidikron Projector Vision Model 10 User Manual

Related Manuals for Vidikron Projector Vision Model 10 User Manual

All Vidikron manuals