Vidikron Projector Vision Model 150 User Manual
Have a look at the manual Vidikron Projector Vision Model 150 User Manual online for free. It’s possible to download the document as PDF or print. UserManuals.tech offer 45 Vidikron manuals and user’s guides for free. Share the user manual or guide on Facebook, Twitter or Google+.
Controls and Functions Vidikron Vision Model 150 Owner’s Operating Manual 9 PREL IMINARY 9.Menu Navigation Buttons: UP BUTTON () Used to move the menu cursor up in the Vision 150 menu system. LEFT BUTTON () Used to move the menu cursor left in the Vision 150 menu system. DOWN BUTTON () Used to move the menu cursor down in the Vision 150 menu system. RIGHT BUTTON () Used to move the menu cursor right in the Vision 150 menu system. ENTER BUTTON When an item is highlighted on the On-Screen Display, the ENTER button selects the item. 10.INPUT 2 (DVI) Press this button to select projector Input 2 (HDMI output from the VHD Controller). 11.HELP Press HELP to display on-screen help text. Press HELP again (or EXIT) to hide it. 12.EXIT When in the menu structure, the EXIT button brings the menu back one page or cancels the current function.
Controls and Functions 10 Vidikron Vision Model 150 Owner’s Operating Manual PREL IMINARY 2.4 VHD Controller Front Panel Figure 2-4 shows the controls and indicators on the VHD Controller front panel; the paragraphs that follow describe them. Figure 2-4. VHD Controller Front Panel 1.POWER BUTTON Press once to toggle from standby mode to on mode. Press it again to return to standby mode. For a discrete on or off command, you can use the direct access buttons on the remote control. 2.IR SENSOR Receives IR commands from the remote. 3.VACUUM FLUORESCENT DISPLAY Can be used instead of the On-Screen Display (OSD). Displays currently-selected menu or – if no menu is selected – the current source, signal format (NTSC or PAL), input resolution and aspect ratio. Component SD NTSC 480i 16:9 V150 123
Controls and Functions Vidikron Vision Model 150 Owner’s Operating Manual 11 PREL IMINARY 2.5 VHD Controller Rear Panel Figure 2-5 shows the rear connector panel on the VHD Controller. Figure 2-5. VHD Controller Rear Panel Outputs1.HDMI OUT Connect this to Input 2 (DVI) on the Vision 150 (see Figure 2-2). Inputs2.HDMI 1 / HDMI 2 (Digital) Two, HDCP-compliant digital video inputs for connecting a DVD player or HD tuner with a DVI or HDMI output. 3.HD1 / HD2 (5 x Analog BNCs) Two inputs (five BNCs per input) for connecting either RGB or component high-definition television signals. The VHD Controller automatically detects the signal format: RGB(HV) or YPrPb, 480p, 720p, 480i, 576i or 1080i. 4.COMPONENT VIDEO (RCA connectors) Standard Definition (480i/576i) Component (YPrPb) input. This is the input for component video from sources such as DVD players. 5.COMPOSITE VIDEO INPUT Standard composite video input for connecting a VCR, laser disc player or other composite video source. 6.S-VIDEO 1 / S-VIDEO 2 Two, standard S-Video inputs for connecting a DVD player, satellite receiver or Super VHS (S-VHS) VCR. 7.12-VOLT (750 mA) TRIGGER OUTPUTS Connection for up to three (3), 12-volt trigger-controlled devices such as retractable screens or screen masks. 8.RS-232 OUTPUT Connect this to the RS232 IN input on the projector, using the provided communication cable. Pb Pr Y Video3 IR RS-232 Control S-Video 1 S-Video 2 HD1 HD212 R/Pr G/Y B/Pb R/Pr G/Y B/Pb H V HDMI 1 HDMI 2 HDMI OutHV TRIGGERS RS-232 OutCAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER. NO USER- SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE CENTER. AV I S : RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR CAUTIONRISK OF ELECTRIC SHOCK DO NOT OPEN! WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. 100-230VAC 50-60 Hz, 165 Watts Max INPUTSSYSTEM CONTROL INTERFACE Component Video Serial No Video Processor / ControllerModel Made In USA 12 4 510 11 12 13 8 6 79 3 For best results, do not run your DVD player in progressive mode.Tip
Controls and Functions 12 Vidikron Vision Model 150 Owner’s Operating Manual PREL IMINARY 9.IR Wired input from a wired remote control or infrared receiver. It is a 3.5-mm, mini phono jack, wired as follows: Ring = +5V Tip = IR Input Sleeve = Ground 10.RS-232 CONTROL PORT A female, 9-pin D-sub connector for interfacing with a PC or home theater automation/control system. 11.POWER INPUT (100 to 240 VAC) Connect the VHD Controller to power here. 12.MAIN AC FUSE This is the main AC input fuse (5mm x 20mm, 500 mA, 250V slow-blow). 13.MAIN POWER SWITCH Disconnects or applies power to the VHD Controller. When an external remote control or infrared receiver is connected to the wired IR input, the IR sensor on the front of the VHD is disabled. Note
Controls and Functions Vidikron Vision Model 150 Owner’s Operating Manual 13 PREL IMINARY 2.6 Vision 150 Remote Control Unit Figure 2-6 shows the Vision 150 remote control, and the paragraphs that follow describe its functionality. Figure 2-6. VHD Controller/Vision 150 Remote Control 1 2 7 10 14 19 22 1611 43 5 6 8 12 17 18 20 21 139 15
Controls and Functions 14 Vidikron Vision Model 150 Owner’s Operating Manual PREL IMINARY 1.IR OUTPUT INDICATOR Lights when a button is pressed to indicate that an IR signal is being transmitted. 2.LIGHT Press to illuminate the buttons. 3.ON / OFF Press to turn the projector on or off. 4.ENT (Enter) Press to select a highlighted menu item or confirm a changed setting. 5.Cursor Buttons (, , , ) Use these buttons to select items or settings, adjust settings or switch display patterns. When no menu is present on-screen, the UP and DOWN buttons toggle through the available aspect ratios, in this order: UP Button = 16:9 - Standard (4:3) - Letterbox - IntelliWide - Cinema - IntelliWide 2.35 DOWN Button = IntelliWide 2.35 - Cinema - IntelliWide - Letterbox - Standard (4:3) - 16:9 Likewise, the LEFT and RIGHT buttons toggle through the different source inputs, in this order: LEFT Button = HDMI 2 - HDMI 1 - HD/RGB2 - HD/RGB 1 - Component SD - S-Video 2 - S-Video 1 - Composite RIGHT Button = Composite - S-Video 1 - S-Video 2 - Component SD - HD/RGB 1 - HD/RGB 2 - HDMI 1 - HDMI 2 6.RETURN/EXIT Press this button to exit the current menu and return to the previous one, or to cancel an operation. 7.MENU Press this button to access the OSD controls. On some remote control units, this button is where the RETURN/EXIT button (item #6) appears here. Intelliwide 2.35 is available only on the Vision 150/CineWide. For more information about aspect ratios, refer to Table 4-1. The “direct select” function of the UP, DOWN, LEFT and RIGHT buttons is available only on the analog inputs (HD/RGB, SD Component, Composite and S-Video). On some remote control units, the ENT (Enter) button (item #4) is in this location. Note Note Note Note
Controls and Functions Vidikron Vision Model 150 Owner’s Operating Manual 15 PREL IMINARY Memory Preset Buttons: 8.ISF NT (Night) Press to recall settings for the current input from the “ISF Night” memory preset. 9.ISF DAY Press to recall settings for the current input from the “ISF Day” memory preset. 10.CUST 2 Press to recall settings for the current input from the “Custom 2” memory preset. 11.CUST 1 Press to recall settings for the current input from the “Custom 1” memory preset. 12.VIDEO (1) Press to select Composite video input as the source or to enter the numeric character “1.” 13.S-VID 1 (2) / S-VID 2 (5) (S-Video) Press to select an S-Video input or to enter the numeric character “2” or “5.” 14.COMP (Component) (3) Press to select Component SD (480i/576i) video input as the source or to enter the numeric character “3.” 15.HD 1 (4) / HD 2 (7) Press to select a HD (RGBHV or YPbPr component) input or to enter the numeric character “4” or “7.” 16.HDMI 1 (6) / HDMI 2 (8) Press to select a Digital Video input or to enter the numeric character “6” or “8.” Aspect Ratio Selection Buttons: Use these buttons to select an aspect ratio directly or to enter numeric characters, as follows: 17.16:9 (9) For viewing 16:9 DVDs or HDTV programs in their native aspect ratio. 18.4:3 (0) Scales the input signal to fit 4:3 display mode in the center of the screen. 19.LETBOX (Letterbox) For viewing LaserDisc movies or non-anamorphic DVDs on a 16:9 screen. 20.I-WIDE (IntelliWide) Enlarges a 4:3 image horizontally in a NON-linear fashion to fit 16:9 full screen display. 21.CINEMA For viewing 2.35:1 source material. 22.SVC (CineWide-equipped projectors only) Selects the IntelliWide 2.35 aspect ratio, used for viewing 16:9 source material on a 2.35:1 screen.
Controls and Functions 16 Vidikron Vision Model 150 Owner’s Operating Manual PREL IMINARY Notes:
Vidikron Vision 150 Owner’s Operating Manual 17 PREL IMINARY 3.1 Remote Control Battery InstallationTo install batteries in the remote control: 1. Remove the battery cover from the back of the remote control. 2. Insert the batteries included with the remote control. Ensure that the polarities correctly match the and markings inside the battery compartment. 3. Replace the battery cover. Notes on Remote Control Operation The remote control can be used to control the Vision 150 within the ranges shown in Figure 3-1. Figure 3-1. Available Range of the Remote Control 3Installation 1. Do not mix an old battery with a new one or different types of batteries. 2. If you will not use the remote control for a long time, remove the batteries to avoid damage from battery leakage.Note Component SD NTSC 480i 16:9 Approx. 7m / 23ft HD 1 HD 2S-VID 2 S-VID 1 HDMI 1 HDMI 2 VIDEOISF DAY ISF NTCUST 1CUST 2 MEMORYRETURN EXITMENU COMPSOURCE SELECTION ANA 4x3LET BOX I-WIDECINEMA LIGHT OFFON SVC ASPECT 123 456 78 ENT
Installation 18 Vidikron Vision 150 Owner’s Operating Manual PREL IMINARY Do not drop the remote control or expose it to moisture or high temperature. The remote control may malfunction under a fluorescent lamp. If that occurs, move the VHD Controller away from the fluorescent lamp. Make sure that there is nothing obstructing the infrared beam between the remote control and the IR receiver on the VHD Controller or projector. If the effective range of the remote control decreases, or it stops working, replace the batteries with new ones. The remote control may fail to operate if the infrared remote sensor is exposed to bright sunlight or fluorescent lighting. Ambient conditions may possibly impede the operation of the remote control. If this happens, point the remote control at the VHD Controller, and repeat the operation.