ViewSonic Cde4200-l Manual

10
PC Timing Reference Chart
No.
VGA Timing Panel FullHD (1920 x 1080) Support
Mode Resolution H sync 
(kHz) V sync 
(Hz) Pixel clock 
(MHz) Polarity
Support
1 IBM VGA 720 x 400 31.4770.09 28.32 N/PV
2 VESA DMT 640 x 48031.559.94 25.175 N/NV
3 VESA DMT 800 x 60037.8860.32 40P/P V
4 VESA DMT 1024 x 768 48.3660 65N/N V
5 VESA DMT
1280 x 768 47.7759.8 79.5 N/P V
6 VESA DMT 1280 x 800 49.759.81 83.5N/PNA
7 VESA DMT 1280 x 1024 63.9860.02 108P/P V
8 VESA DMT 1360 x 768 47.7160.01 85.5P/PNA
9 VESA DMT 1440 x...

11
Using the Display Features
Remote Control and Display Controls
Inserting Remote Control Batteries
1. Remove the battery cover by pulling then lifting the knob on the cove\
r.
2.  Insert the batteries, corresponding to the (+) and (-) markings on t\
he battery 
compartment.
3. Reattach the battery cover.
 CAUTION
•	 Only use the specified AAA batteries.
•	 Do not mix new and old batteries. This may result in creaking or leakage\
, which 
may pose a risk of fire or lead to personal injury.
•	 Insert...

12
Touch keys located at the front side of the 
display operate the same as these buttons 
on the remote control.
Button
Description
1 POWER Press this button to turn the power on from standby mode. Press it again\
 to 
return to standby mode.
2 TV This function is not available for this model. (Only for TV)
3 INFO Press to display the current state of the display.
1080p 60Hz
A ug-18 15:02 Sa tHDMI
40~9,  
- number buttons Press the respective button to input a character or number.
5 - VOL - Press to...

13
Operation
Turning the Display On and OffPress 
 on the remote control.
You can also use the 
 key on the front side of the 
panel.
* If there is no input signal within 10 minutes, the 
display will be turned off automatically.
Adjusting the Volume
Press VOL +/- to adjust volume.
To turn off the volume, press MUTE.
To restore volume, press  MUTE again, or press  
VOL +/- directly.
Viewing the Displayed Information
To display the current information of the display:
Press INFO, and the current state will...

14
Selecting the Input SourceTo select the input sources connected to the display:
1. Press SOURCE on the remote control.
2. Press 
 or  to select the desired input source.
3. To confirm the selection, press  ENTER.
Source SelectSource Select
AV
AV
YPbP r
YPbPr
HDMI 1
HDMI 1
HDMI 2
HDMI 2
HDMI 3
HDMI 3 PC
PC
USB
USB
Using the Parent Controls
With PARENT CONTROL, you can block display and movie programming based o\
n 
Movie ratings.
Password is required to access the PARENTAL CONTROL menu. The default is\...

15
Blocking Selected Input Source
To block the selected input source:1.   Press  MENU to display the OSD main menu.
2.   Press 
 or  to select PARENTAL menu, then 
press ENTER to enter the menu.
3.   Enter the password.
4.   Press 
 or  to select Source Lock, then press 
ENTER to enter its submenu.
5.   Press 
 or  to select the input source that you 
want to block.
6.   Press  ENTER to confirm.
A 
 icon indicates the selected input source has 
been blocked.
7.   Press  EXIT to exit the menu.
SOURCE L...

16
Customizing PC Display
Connect the PC and your display using the VGA cable. See “Personal Co\
mputer” on 
page 9.1.   Press  SOURCE to display the Source Select 
menu.
2.   Press 
 or  to select PC, then press ENTER to 
confirm the setting.
3.   Press  MENU to display the OSD main menu.
4.   Press 
 or  to select PICTURE menu, then press 
ENTER to enter the menu.
5.   Press 
 or  to select PC Settings, then press 
ENTER to enter its submenu.
6.   Press 
 or  to select Auto Adjust, Horizontal 
Position...

17
Playing Music
1.   Press 
 or  to select Music, then press 
ENTER. If there are several folders, press 
 
or 
 to select the desired folder, then press 
ENTER to view the subfolder content.
2.   Press 
 or  to select a song, then press 
ENTER to play. An automatic playback begins 
from the selected song.
3. During the playback, do the following: •   To pause the playback, press 
 or  to select 
 icon, then press ENTER. Press  or  to 
select 
 icon, then press ENTER to resume.
•   
To skip to previous...

18
Customizing Slide Show Settings1.   Press 
 or  to select Media Setting, then 
press ENTER.
2.   Press 
 or  to select the menu item, and 
press 
 or  to adjust the setting.Slideshow Inte rval
Slideshow Effe ct
Slideshow Repeat
Slide Mode
Background Musi c
Music Pl ay Mode
Music Pl ay Repeat
Music  Auto Play 5 S
Ra
ndom
Of f
Order
On
Order
Of f
Of f
Menu item Description
Slideshow Interval Set the interval time between each slide displays (3 S / 5 S / 10 S / 3\
0 S 
/ 1 Min / 30 Min).
Slideshow Effect...

19
Picture Menu
PICTUREPICTURE
Picture Settings 
Screen Size  Wide
PC Settings
Co lor  Temperature  Normal
B ack light  High
Ad vanced Pic ture Settings
:Return:Move:Go to Ne xt MenuMENUMENUENTERENTER
PICTURE SET TINGSPICTURE SETTINGS
Picture Mode  Power Sa ving
Brightness
Co ntrast
Satur ation
Hue
S harpness
:Retur n:MoveMENUMENU:Change Setting
The  Power Sa ving pic ture is qualified ENERGY ST AR 
PC SETTINGSPC SET TINGS
Au to Adjust  Execut e
Horizontal P osition
Ve rtical P osition 
Cloc k
P hase
R...