ViewSonic N2600w Users Guide

9ViewSonic N2600w 
ENGLISHRear View of the Product 
 

ViewSonic N2600w 10 
ENGLISH
ATV signal input 
Connect to the antenna or cable service.
BYCbCr signal Audio input (left/right) 
Connect the external audio into this jack.
CYCbCr signal input 
Connect the external video device with component output to these jacks.
DAV/ S-Video signal Audio input (left/right) 
Connect the external audio into this jack.
EAV Video input 
Connect the external video devices such as VCR, DVD and video game into this jack.
FS-Video input 
Connect the external video device such...

11  ViewSonic N2600w 
ENGLISHRemote Control 
Remote control button function as follow 
1SOURCE Select Input Source. 
20~9Input channel number. 
3RecallReturn to the previous channel. 
4Volume
x / Volume
zAdjust Volume. 
5SRSEnable/Disable Surround Sound. 
6MUTEMute On/Off. 
7TELETEXT Function 
Key (Green) 
Select the teletext pages color coded in green along 
the bottom of the screen. 
8TELETEXT Switch Teletext On/Off. 
9TELETEXT Function 
Key (Red) 
Select the teletext pages color coded in red along the...

ViewSonic N2600w 12 
ENGLISH11SLEEPSet timer to turn off TV.   
12PIP/POPActivate PIP or POP feature. 
13PIP/SOURPress to toggle the Sub picture between PIP and POP.
14POWER Power ON/OFF. 
15-/—Use this button to select the channel number with 
“-/—”.
16Channel
x / Channel
zChange TV channels.   
17NICAM Select the sound mode. 
18
x/
z/
{/
y/OK Button 

x/
z for OSD function select and 
{/
y for function 
adjust.
VOL
x and VOL
z button can adjust the volume when 
there is no OSD menu display. CH
x and...

13ViewSonic N2600w 
ENGLISH
Installation
1.  Insert Remote Control Batteries 
1 Remove the battery cover by pulling then lifting the knob on the cover. 
2 Insert the batteries, corresponding to the (+) and (-) markings on the battery 
compartment. 
3 Reattach the battery cover.
CAUTION
yOnly use the specified AAA batteries. 
yDo not mix new and old batteries. This may result in cracking or leakage, which may 
pose a risk of fire or lead to personal injury. 
yInsert batteries according to (+) and (-)...

ViewSonic N2600w 14 
ENGLISH2.  Connecting with the antenna 
Make sure the power is off before installing N2600w. 
Connect the LCD TV to TV antenna terminal or CATV box by 75-ohm coaxial cable. 
3.  Connect Audio Cable 
To connect an external amplifier, connect the L/R RCA cable from the TV AUDIO OUT port 
to the appropriate AUDIO IN port on a compatible amplifier as shown on the right. 
RF Cable   
Audio in Cable 
(Cable not supplied)
 

15ViewSonic N2600w 
ENGLISH4.  Connect AV, S-Video, YCbCr, YPbPr, HDMI to Video Devices 
Connect Video/Audio cables from compatible devices into the right side of N2600w. 
AV Mode: 
S-Video Mode: 
RCA A/V  Cable 
(Cable not supplied) 
VCR
S-Video Cable   
(Cable not supplied)
Audio in Cable   
(Cable not supplied)
VCR
 

ViewSonic N2600w 16 
ENGLISHYCbCr Mode: 
YPbPr Mode: 
Audio in Cable   
(Cable not supplied)
DVD Player or VCR YCbCr Cable   
(Cable not supplied)
Audio in Cable   
(Cable not supplied)
DVD Player or VCR YCbCr Cable   
(Cable not supplied)
 

17ViewSonic N2600w 
ENGLISHConnect with a SCART cable 
SCART1 Mode: 
Connect the scart socket of the VCR to the SCART1 socket on the LCD TV. 
Note:    The signal type RGB can only be selected for the SCART1 socket and the SCART1 
input source can be received. These signals are transmitted, for example, by a pay TV decoder, 
game machine or photo CD unit, etc and that digital signal can be recorded via SCART1 
socket.
SCART2 Mode:
Connect the scart socket of the VCR to the SCART2 socket on the LCD TV....

ViewSonic N2600w 18 
ENGLISHHDMI Mode: 
There are two possible HDMI cable terminals of your DVD player. Please refer to one of the 
connection that fits for your requirement. 
(1) HDMI-DVI cable 
Note:To receive the sound from DVD, please turn on Sound Menu of OSD for selecting 
HDMI audio to YCbCr. However, the input source should be in HDMI. 
(2) HDMI cable 
Note:To receive the sound from DVD, please turn on Sound Menu of OSD for selecting 
HDMI audio to HDMI. However, the input source should be in...