ViewSonic N2600w Users Guide

							29ViewSonic N2600w 
ENGLISHPC Menu 
ItemDescriptionOperation
ContrastAdjust the contrast level. 
y to increase the contrast. 

{ to decrease the contrast. 
BrightnessAdjust the brightness level. 
y to brighten the display. 

{ to darken the display. 
H-Position
(VGA only) 
Adjust the horizontal position of the 
video

y to move toward the right. 

{ to move toward the left. 
V-Position
(VGA only) 
Adjust the vertical position of the 
video.

y to move upward. 

{ to move downward. 
Clock
(VGA only) 
Adjust the delay time between 
horizontal synchronous signal and 
video.

y to increase the delay time. 

{ to decrease the delay time. 
Phase
(VGA only) 
Adjust the delay time. 
y to increase the delay time. 

{ to decrease the delay time. 
Color Mode Select color Mode. 
y or 
{ enter Color Mode sub 
menu.
Auto Adjust 
(VGA only) 
Automatically adjust the picture’s 
clock, phase, horizontal position 
and vertical position. 

y or 
{to activate the 
function
 
						

							ViewSonic N2600w 30 
ENGLISHColor Mode Sub Menu 
ItemDescriptionOperation
Color
Temp.
Some default color temp set is 
here. Options : Normal,Warm, 
sRGB, User and Cool

y or 
{ to select color. 
User-R
You can adjust R to change color 
temp.

y to increase the color temp. 

{ to decrease the color temp 
User-G
You can adjust G to change color 
temp.

y to increase the color temp. 

{ to decrease the color temp 
User-B
You can adjust B to change color 
temp.

y to increase the color temp. 

{ to decrease the color temp 
 
						

							31ViewSonic N2600w 
ENGLISHOSD menu 
ItemDescriptionOperation
OSD
LanguageSelect the OSD language. 
y or 
{: select the OSD language. 
H Position Adjust the horizontal position 
of the OSD. 

y: move toward the right. 

{: move toward the left. 
V Position Adjust the vertical position of 
the OSD. 

y: move upward. 

{: move downward. 
OSD Time 
Out
Adjust OSD display time. 
Range 0~60 sec. 

y: increase the OSD display time. 

{: decrease the OSD display time. 
TransparencyAdjust OSD’s transparency 
level.

y: increase the transparency. 

{: decrease the transparency. 
Information 
Show some Picture 
information including 
main/sub picture source and 
firmware version. 

y or 
{: display information. 
Memory 
Recall
Reset the OSD settings to 
default.
OSD Language and Input 
Source settings are not 
affected.

y or 
{: activate the function. 
 
						

							ViewSonic N2600w 32 
ENGLISH
Other Information 
Specifications
LCDType26” view able 
³Color Filter 0.4215(H) x 0.4215(V) mm pixel pitch 
³Glass surface RGB vertical stripe 
³³Anti-Glare
Input signal RGBRGB analog (0.7/1.0 Vp-p, 75 ohms) 
³³Separate Sync, 
³³fh:30-80 kHz, fv:50-75 Hz 
³RFTV system Antenna/ PAL/SECAM 
³VideoD-sub x 1, RCA Composite x 1, S-Video x 1   
    RCA Component x 1 set (YCbCr/YPbPr)   
    HDMI X 1, SCART x 2   
³AudioMini-stereo (å3.5mm) x 1,   
    3 pair of RCA (L/R) stereo jack   
Compatibility PCUp to 1360 x 768 Non-interlaced 
Resolution1360 x 768 @ 60 Hz 
Speaker Output ³5W x 2 
Audio Output ³1 pair of RCA (L/R) stereo jack   
    Earphone Mini-stereo (å3.5mm) x 1 
Power Voltage90-240 VAC, 50/60 Hz (auto switch) 
Display Area Full Scan 575.769mm (H) x 323.712 mm (V) 
OperatingTemperature 32° F to + 104° F (0° C to + 40° C) 
ConditionsHumidity 10% to 90% (non-condensing) 
³
StorageTemperature -4° F to + 140° F (-20° C to + 60° C) 
ConditionsHumidity 10% to 90% (non-condensing) 
³
DimensionsPhysical 688 mm (W) x 546 mm (H) x 250 mm (D)³
    27.08 in (W) x 21.49 in (H) x 9.84 in (D) 
WeightNet13.6 kg (29.96 lb.) 
Gross17.0kg (37.44 lb.) 
Regulations³CE
Power Saving On < 180W LED Green 
ModeActive Off  < 3W   LED Off 
Preset Timing Mode (pre-adjusted to GTF 1360 x 768 @ 60 Hz) 
Warning: Do not set the graphics card in your computer to exceed these refresh rates; doing so may result 
in permanent damage to the LCD TV. 
Note:Product Specifications are subject to change without notice. 
 
						

							33ViewSonic N2600w 
ENGLISH
Troubleshooting
No power 
yMake sure the LCD TV is properly connected.   
yMake sure the AC power cord is properly connected.   
yMake sure the AC power is ON, DC power button is ON (Green LED). 
yPlug another electrical device (like a radio) to the power outlet to verify that the outlet is 
supplying the proper voltage. 
Poor or no picture 
yThe TV station may be experiencing problems. Try another channel. 
yThe Cable TV signal may be scrambled or encoded. Please contact your local cable 
operator. 
yMake sure that connection to other components are correct.   
yMake sure that setup has been done correctly after connections.   
yMake sure the correct input is selected and the input signal is compatible. 
Strange color, light color, or color misalignment 
yEnsure that the video cable is securely connected. 
yThe picture may appear dim in a brightly lit room. 
yAdjust brightness and contrast. 
yCheck the input signal setting. 
No Sound 
yCheck your audio connections 
yThe MUTE button may have been pressed, try pressing this button again. 
yCheck your audio settings, your TV audio may be set to minimum. 
yPress the Volume + (Up) button on the remote control. 
Remote control unit does not operate 
yMake sure batteries are inserted correctly. 
yBatteries could be weak or dead. Replace batteries. 
yIs a fluorescent light illuminated near the remote control sensor? 
yThe path of the remote control beam may be blocked. Make sure the path is clear and that 
the remote control is aimed at the remote control sensor on the TV. 
yPress only one button at a time and it is the correct one for the operation you want to 
perform. 
Unit cannot be operated 
yExternal influences such as lightning or static electricity may cause improper operation. 
In this case, operate the unit after first turning on the power of the LCD TVand the AVC 
System, or unplug the AC cord for 1 to 2 minutes, then replug again. 
 
						

							ViewSonic N2600w 34 
ENGLISHPower is cut off suddenly 
yIs the sleep timer set?   
yThe internal temperature of the unit has increased. Remove any objects blocking the vent 
or clean as necessary. 
No CATV reception (or no reception above CH13) 
yIs the AIR/CABLE option set correctly? Please set the AIR/CABLE option to CABLE. 
yCATV is connected improperly or not connected; please check all the CATV 
connections. 
yThe cable TV service is interrupted; please contact your cable operator. 
Picture is cut off/with sidebar screen 
yIs the image positioned correctly? 
yAre screen mode adjustments such as picture size set correctly? 
 
						

							35ViewSonic N2600w 
ENGLISH
Customer Support 
For technical support or product service, see the table below or contact your reseller. 
NOTE:You will need the product serial number.
Contry / Region  Web site  Telephone 
Austriawww.viewsoniceurope.com/aus  0150 159 6005 
Belgium www.viewsoniceurope.com/beflwww.viewsoniceurope.com/befr02 256 6642 
Denmarkwww.viewsoniceurope.com/dk  35 25 65 12 
Finlandwww.viewsoniceurope.com/fi  09 2311 3413 
Francewww.viewsoniceurope.com/fr  03 8717 1616 
Germanywww.viewsoniceurope.com/de  0696 630 8051 
Republic of Ireland www.viewsoniceurope.com/uk  01 411 8936 
Italywww.viewsoniceurope.com/it  02 4527 9033 
Luxembourgwww.viewsoniceurope.com/lu  40 6661 5618 
The Netherlands www.viewsoniceurope.com/nl  053 484 9308 
Norwaywww.viewsoniceurope.com/no  22 57 77 38 
Portugalwww.viewsoniceurope.com/uk 21359 1423 
Russiawww.viewsoniceurope.com/ru 800-200-8439 
Spainwww.viewsoniceurope.com/es  913 496 534 
Swedenwww.viewsoniceurope.com/se  08 5792 9045 
United Kingdom www.viewsoniceurope.com/uk  0207 949 0307 
 
						

							ViewSonic N2600w 36 
ENGLISHLimited Warranty 
VIEWSONIC® LCD TV 
What the warranty covers: 
ViewSonic warrants its products to be free from defects in material and workmanship, under normal use, during 
the warranty period. If a product proves to be defective in material or workmanship during the warranty period, 
ViewSonicwill at its sole option, repair or replace the product with a like product. Replacement product or parts 
may include remanufactured or refurbished parts or components. 
How long the warranty is effective: 
ViewSonic LCD TV’sare warranted for one (1) year for all parts excluding the light source and one (1) year for 
labor from the date of the first consumer purchase. 
Who the warranty protects: 
This warranty is valid only for the first consumer purchaser. 
What the warranty does not cover: 
1.  Any product on which the serial number has been defaced, modified or removed. 
2.  Damage, deterioration or malfunction resulting from: 
a.  Accident, misuse, neglect, fire, water, lightning, or other acts of nature, unauthorized product 
modification, or failure to follow instructions supplied with the product. 
b.  Repair or attempted repair by anyone not authorized by ViewSonic.
c.  Any damage of the product due to shipment. 
d.  Removal or installation of the product. 
e.  Causes external to the product, such as electrical power fluctuations or failure. 
f.  Use of supplies or parts not meeting ViewSonic’s specifications. 
g.  Normal wear and tear. 
h.  Any other cause which does not relate to a product defect. 
3.  Any product exhibiting a condition commonly known as “image burn-in” which results when a static image 
is displayed on the product for an extended period of time. 
4.  Removal, installation, and set-up service charges. 
How to get service: 
1.  For information about receiving service under warranty, contact ViewSonic Customer Support at 
800-888-8583. You will need to provide your products serial number. 
2.  To obtain warranted service, you will be required to provide (a) the original dated sales slip, (b) your name, 
(c) your address, (d) a description of the problem, and (e) the serial number of the product. 
3.  Take or ship the product freight prepaid in the original container to an authorized ViewSonicservice center 
or ViewSonic.
4.  For additional information or the name of the nearest ViewSonic service center, contact ViewSonic.
Limitation of implied warranties: 
There are no warranties, express or implied, which extend beyond the description contained herein including the 
implied warranty of merchantability and fitness for a particular purpose. 
Exclusion of damages: 
ViewSonics liability is limited to the cost of repair or replacement of the product. ViewSonic shall not be liable 
for: 
1.  Damage to other property caused by any defects in the product, damages based upon inconvenience, loss of 
use of the product, loss of time, loss of profits, loss of business opportunity, loss of goodwill, interference 
with business relationships, or other commercial loss, even if advised of the possibility of such damages. 
2.  Any other damages, whether incidental, consequential or otherwise. 
3.  Any claim against the customer by any other party. 
Effect of state law: 
This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. 
Some states do not allow limitations on implied warranties and/or do not allow the exclusion of incidental or 
consequential damages, so the above limitations and exclusions may not apply to you. 
Sales outside the U.S.A. and Canada: 
For warranty information and service on ViewSonic products sold outside of the U.S.A. and Canada, contact 
ViewSonic or your local ViewSonic dealer. 
Warranty_LCD TV 1 of 1 
4.3: ViewSonic LCD TV Warranty Rev. la  Release Date: 03-31-05